Question about Cars & Trucks

Open Question

Mazda bt 50 problem hi I would like to change the

Mazda bt 50 problem hi I would like to change the auto trans oil in a 2007 bt-50 3ltr diesel i'm aware of the drain and level plug system but can only find a small rusty covered hex head stud in the middle upper area on the right side of box which i'm unsure if it is the filler plug also does the trans have a filter that has to be changed does the oil pan have to be removed to get to the filter like the old GM turbo 400 auto box i'm aware that the oil has to be mercon v type also what is the service schedule km duration how often ?thanking you cheers barry

Posted by Anonymous on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 125 Answers

SOURCE: where is the transmission filter?

from what i can gather there is no filter replacement, only a fluid exchange. this info is coming from a rather good borderline great mech. program.

Posted on Sep 16, 2008

  • 17 Answers

SOURCE: Need specific location of oil drain plug to change oil

I have owned a 1999 intrepid for 9 years. And have changed the oil many times in the 170,000 miles I've owned it. This car comes mostly with a 2.7 liter motor. It does some times have a 3.5 liter. As you open the hood,there is a sticker that tells you what motor it has. If you have the 2.7, between the two front wheels you have a cast aluminum oil "pan" You will see a oil filter sitting vertical, towards the passenger side.The bottom of the filter is almost flush with the bottom of the oil pan. Just to the side of the filter,towards the driver side, is a hex head oil plug. It will take a 11/16" wrench to remove it.Hope this helps lbreen

Posted on Apr 22, 2009

  • 10319 Answers

SOURCE: not sure i am locating the oil drain plug or the

Transmissions are drained by removing the pan itself. A new filter is to be installed upon draining. That is why there is no drain pan plug. The Chevy Powerglides were the last American made car with a drain plug in the 1965

Posted on Apr 24, 2010

  • 22326 Answers

SOURCE: 2006 F430 Spider oil change.

the correct way is to **** the oil out with a pump like in the garage and not take the sump plug out ,these additional plugs you refer to are bolts holding the baffle plates in place insde the sump ..If you dont know what your doing then i respectfully suggest leave well alone and take to a garage ,even a experianced mechanic can get perplexed here but at the end of the day its only a car with a fancy name ,try working on a foden truck or a case catapillar now these are real mechanics nightmares

Posted on Oct 25, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Thick oil floating in the radiator overflow tank

red or pink oil is transmission oil cooler in tank failed
if it is black oil check for the sump oil cooler is not leaking at the heat exchanger

Sep 15, 2017 | Mazda Cars & Trucks

1 Answer

My 2008 auto box in my Mazda BT 50 is dropping in out of gears. I have asked around and people are saying in excess of $3000 to fix.

run the fault codes first to determine if the problem is electronic ( servos, solenoids , wiring and connections or TCM
it could be a coincidence about the noise in the transmission area so leave the new transmission out of the equation until all the possibilities are covered
has the transmission oil been change lately
drop the pan of the transmission and check for foreign material in the pan and filter
if you have something major , there will be evidence in that area

Jul 27, 2016 | Mazda Cars & Trucks

1 Answer

Manual for Mazda BT 50 I can not rember how to re set the the frigde ?

  1. Mazda BT-50 - CarsGuide CarsguideBT-50 Car Showroom Online: Discover BT-50 Pictures, Videos, News & Reviews: ... My 2007 Mazda BT-50 ute had a very smelly clutch problem after rever.

Jul 12, 2015 | Mazda Cars & Trucks

1 Answer

Location of fuel filter in 2012 bt-50

(i bet your read the operators guide, and it never mentions this.
but bobby next door said to look?)????????????

why do you ask, who told you to look,
MAZDA BT-50 , 2012
what country?> in Australia?
IT is a larger version of the predecessor B-Series pickup and is not sold in the Japanese and North American market.
so where? is it? cars vary by COUNTRY BIG TIME>

which engine? Size, and GAS or DIESEL. both are used.

now my wild guess based on USA cars. not yours. so.
there is no outside fuel filters now.
in the USA its a EPA (quasi mandate) (by parameter edict)
(in lay terms, keeps fuel colder)
ours were moved to the inside of the tank, and the line in the
operators guide, service tables, the filter change is deleted. here.

so who told you , you need this, and why?

Jun 22, 2014 | 2007 Mazda B Series

1 Answer

Mazda bt 50 engine not injecting diesel when cranking

run fault codes and check for injector control problems. check that the immobiliser is working. Check that there is high pressure to the injectors (Pump working)

Jan 09, 2014 | 2008 Mazda B Series Pickup

1 Answer

Mazda bt 50 2.5 tdi 2009 idling problem when cold

Hi, on the diesel they are no spark plugs, you still have problem with injector maybe one of them is not spraying diesel is dripping. Take them out and leave the people to double check them all.

Jul 20, 2013 | Cars & Trucks

2 Answers

Tengo una mazda BT-50 y la luz indicadora RFW LOCK no se apaga??

tengo un mazda bt-50 pro cabina sencilla y el radio se me desconfiguro tengo q poner tres codigos de cuatro numeros cada uno q me ayuden xfaaa diganmee esos codigos se les agradece

Feb 25, 2012 | 2005 Mazda B-Series

1 Answer

1994 mazda 626 4 cylinder transmission hold light blenks while driving

Hi, The best way is to take it to a Auto Trans Specialist who will put it on an obd scanner (saves alot of mucking around & costs about $50) this should tell you exactly what needs to be fixed.

Jan 24, 2010 | 1994 Mazda 626

3 Answers

Hard time shifting, bubbles in oil, trans not

noy sure about the hard time sifting but sounds like a vacum hose some from trans to engine may have a split in it which causes long gear change or none at all, oil brown and stinky change it its too old you should change your oil every 10 thousand

Nov 09, 2009 | 2004 Dodge Ram 2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15387 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides