Question about 1999 Toyota Tacoma PreRunner

Open Question

Chk engine light comes on with engine code po402 on my 1999 toyota tacoma with 2.7 liter engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 42 Answers

SOURCE: 2005 toyota tacoma check engine light

pull the E.F.I. fuse located under the hood on the drivers side, if there is more than 1 efi fuse pull them both along with the E.T.C.S. fuse (if there is one) for 1 minute or so. That should do it

Posted on Dec 23, 2008

mecanica03
  • 881 Answers

SOURCE: code po441 check engine

first try to reset the ecu, disconnect the negative battery terminal few minutes, then reconnect start engine and test

Posted on Jun 18, 2009

  • 1 Answer

SOURCE: how to change the check engine light on a 2000 toyota tacoma

i had the same thing, i had it tested at auto zone and they said it was the obd2. i was told the o2 sensor was not a big deal so i reset the check engine light by holding down the trip meter button while starting her up and it has not been on since.

Posted on Jun 23, 2009

  • 2187 Answers

SOURCE: toyota tacoma 2003 check engine light is

If the car still runs then the problem is not major but may develop into one if unchecked. The sensors in the engine may have detected problems and should be stored in its ECU. If you have a scanner have it connected to the diagnostics it should give you a clue on what to check out.

Posted on Jul 08, 2009

Pointnino
  • 14 Answers

SOURCE: check engine light on 2003 toyota tacoma, O2 sensor?

An O2 sensor code is a tricky one. It could mean SEVERAL different things, and I know how bad it sucks to hear this, but your best bet is to take it in and have a diagnostic ran on it at either a dealer or a good mechanic shop with a computer they can hook up to it. I had an "O2" code come up a while back on another car I used to have, and literally spent weeks and hundreds of dollars trying to fix it, and never did. Finally out of desperation took it in, paid the $90, and they found the problem and fixed it in like 30 minutes. Something I would have never even thought of was causing it (can't remember off the top of my head). After that I stopped wating time and money on check engine lights. One comes on in my car, I take it to have it ran for free at and auto parts store just to make sure it's not a loose gas cap or something, just to get an idea of what I'm looking at, then go and make an appointment to have to hooked up to a diagnostic computer to track down the problem. Good luck, and hope this helps save you some time and money.

Posted on Apr 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What terminals on a 2001 toyota tacoma 2.7 liter engine do I jump to access trouble codes?


OBDII will require a code reader. There are no terminals that can be jumped on the ALDL to get trouble codes.

Feb 19, 2015 | 2001 Toyota Tacoma

1 Answer

How to I change the starter in 1997 toyota tacoma 4 x 4


Try this site. I found it on the Tacoma site.

http://www.tacomaworld.com/forum/1st-gen-tacomas/178029-how-remove-install-starter-fix-clicking-starter-2-7-liter-3rz-fe-engine.html

Nov 11, 2014 | Cars & Trucks

1 Answer

My 2001 Toyota Tacoma's check engine light is on and it will not accelerate over 30 mph. What could this be?


There could be numerous components causing this issue. Bring your vehicle to a local autozone to have the chk engine code read. This will specify exactly what component has failed!!Post that code on fixya for further help!!

Dec 11, 2010 | 2004 Toyota Tacoma

1 Answer

Hello i am trying to fix my check engine light and the light is on and the code says its my egr valve is not getting enough flow and causing the light to come on. also dont know where the reset button for...


you don't have a reset button but what you can do is chk for vacuum going to your egr. chek the "vacuum switching valve" VSV and see if you have an "EGR vacuum transducer" those are 2 very common problems with toyotas

Nov 19, 2010 | 2001 Toyota Tacoma

1 Answer

What causes my check engine lite to intermittently come on in my 2002 toyota tacoma 2.4 liter


It could be anything that causes the light to come on,you will have to have a code reader to plug into the obd2 connector ,to pull the codes to read and then the code will tell the story behind the problem.Auto zone can do this for free.If this was at all helpful,please rate thank you.

Aug 22, 2010 | Toyota Tacoma Cars & Trucks

2 Answers

Check engine light on 2003 toyota tacoma, O2 sensor?


An O2 sensor code is a tricky one. It could mean SEVERAL different things, and I know how bad it sucks to hear this, but your best bet is to take it in and have a diagnostic ran on it at either a dealer or a good mechanic shop with a computer they can hook up to it. I had an "O2" code come up a while back on another car I used to have, and literally spent weeks and hundreds of dollars trying to fix it, and never did. Finally out of desperation took it in, paid the $90, and they found the problem and fixed it in like 30 minutes. Something I would have never even thought of was causing it (can't remember off the top of my head). After that I stopped wating time and money on check engine lights. One comes on in my car, I take it to have it ran for free at and auto parts store just to make sure it's not a loose gas cap or something, just to get an idea of what I'm looking at, then go and make an appointment to have to hooked up to a diagnostic computer to track down the problem. Good luck, and hope this helps save you some time and money.

Apr 03, 2010 | 2003 Toyota Tacoma

1 Answer

Fluid capacities and fluid specs


2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE

Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30
Engine, 2WD, with filter..........5.5 liters
Engine, 4WD, with filter..........5.4 liters

Manual Transmission,......GL-5/ GL-4 All TEMPS......75W-90
Automatic Transmission,A340E......AF3 / A43D......AF3

Differential, Front/ Rear W/ ADRD......GL-5 ALL TEMPS......75W-90
Differential, Front Less ADRD......GL-5 ALL TEMPS......80W-90

Transfer Case,......GL-4/GL-5 ALL TEMPS......75W-90 Gear oil.

Capacity:
Cooling System, Initial Fill..........8.5 liters
Automatic Transmission, A340E Initial Fill..........1.6 liters
Automatic Transmission, A340F Initial Fill..........2 liters
Automatic Transmission, A43D Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A340E..........7.2 liters
4 speed A340F..........10.1 liters
4 speed A43D..........6.5 liters
Manual Transmission, ..........2.5 liters
Differential, With ADRD Front..........1.2 liters
Differential, Without ADRD Front..........1.1 liters
Differential, 2WD V6 Rear..........2.6 liters
Differential, 4WD Extra Long Rear..........2.5 liters
Differential, Short WB With LSD Rear..........2.7 liters
Differential, Short WB Without LS Rear..........2.6 liters
Transfer Case, Electronic..........1.2 liters
Transfer Case, STD..........1 liters


Feb 09, 2010 | 2000 Toyota Tacoma PreRunner

2 Answers

My 2000 Tacoma 6 Cylinder engine warning light came on? Had oil changed yeasterday. All fluid levels are fine. What is happening? Safe to drive? Bjorn


I have a 2000 Tacoma Extra Cab Pre Runner. When I put on my camper shell my check engine light comes on. Oil levels and tires are fine. I took my shell off and light goes off. I hauled alot of wood and the light did not come on. Why would the camper shell be trip-en my light? Ofcourse I am gunna get the code checked next week.

Nov 12, 2009 | 2000 Toyota Tacoma PreRunner

1 Answer

Chk.Eng. Light came on after adding coolant.


Only in that you probably knocked off a wire or vacuum hose while working under the hood.

Nov 02, 2009 | 2003 Toyota Tacoma

1 Answer

O2 Sensors


Autozone oxygen sensors do not function properly in Toyota vehicles. Just had a Tacoma yesterday with the same issue. New sensors, runs poor, check engine light on. Toyota sensors fixed it right now.

Dec 29, 2008 | 1996 Toyota Tacoma

Not finding what you are looking for?
1999 Toyota Tacoma PreRunner Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...