Question about Ford Cars & Trucks

Open Question

How to replace 2001 ford e350 pcv valve - Ford Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Handy Mike
  • 6 Answers

SOURCE: how do i replace the pcv valve on a 2000 explorer xlt v6 sohc?

On the passenger side of the intake manifold, coming off the bottom about the center of the engine front to back, you'll feel a hose that comes off a nipple. That hose makes a 90 degree bend and goes around to the rear of the motor. Where that hose meets the Y-connector from the other side of the intake you'll find the PCV valve. It's almost impossible to see it with the hood installed, and even tougher to reach it.

A good source of information for Ford Explorers can be found here

Posted on Oct 25, 2008

michigan man
  • 3533 Answers

SOURCE: pcv valve

AutoZone can help with diagrams

Posted on Jan 18, 2009

davesmith_37
  • 94 Answers

SOURCE: where is the pcv valve located on a 2003 ford ranger

  • The PCV valve can be located in several places. The most common location is in a rubber grommet in the valve cover. It can be installed in the middle of the hose connections, as well as installed directly in the intake manifold.
  • Once the PCV valve is located, make sure all the PCV system hoses are properly connected and that they have no breaks or cracks.
  • Remove the air cleaner and inspect the air and crankcase filters. Crankcase blowby can clog these with oil. Clean or replace such filters.
  • Oil in the air cleaner assembly indicates that the PCV valve or hoses are plugged.
  • Make sure you check these and replace the valve and clean the hoses and air cleaner assembly.
  • When the PCV valve and hose are in satisfactory condition and there is oil in the air cleaner assembly, perform a cylinder compression test to check for worn cylinders and piston rings.
  • Posted on Feb 27, 2009

    • 1 Answer

    SOURCE: 2003 FORD EXPEDITION PCV VALVE LOCATION

    show me a picture. everyone else says it's on the passenger side. nothing white on driver side of my 03 expedition.

    Posted on Mar 07, 2009

    mitchbtu
    • 121 Answers

    SOURCE: Where is pcv valve located on 2005 taurus

    It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
    pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

    Posted on Jan 27, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Spongy brakes on 2001 E350


    abs control module bad allowing internal regurgitation of fluid.

    700-1200 bucks depending on your vin which the dealer will need to get the right one for you.

    Dec 22, 2012 | 2002 Ford E350

    1 Answer

    89 ford v-8 e-350 fleetwood blue smoke coming out the exhaust what would problem be?


    blue smoke is usually caused by oil getting into the cylinder combustion area, either past rings, valve seals, or valve guides, all being expensive to fix-first though, check the PCV system for leaks or a plugged PCV.

    Jun 16, 2011 | 2002 Ford E350

    1 Answer

    PCV valve failed visual inspection during smog test, but the car passed physical smog test. How to replace 2002 Ford Escape PCV valve assembly?


    remove the hose to the PCV and It simply pulls out and a new one is pushed in and hose is inserted back on. It's kind of like a cork. I can not believe they check for visual inspection. Here in SC, we don't have inspections. But anyways, GOOD LUCK

    Oct 03, 2010 | 2001 Ford Escape

    2 Answers

    How to replace pvc valve


    SECTION 303-08: Engine Emission Control 2001 Escape Workshop Manual REMOVAL AND INSTALLATION Positive Crankcase Ventilation (PCV) Valve —2.0L Zetec Removal and Installation
    1. Remove the PCV valve (6A666).
      • Remove the crankcase ventilation hose (6853) from the PCV valve (6A666).
      • Remove the PCV valve from the grommet.
    62777e1.gif

    Dec 31, 2009 | 2001 Ford Escape

    1 Answer

    I would like directions on replacing a PCV valve on a 1999 Ford ZX2


    Under hood driver side, upper engine area, mounted on valve cover, disconnect hose at PCV, pull PCV valve out insert new one and reconnect hose.

    Dec 29, 2009 | 2001 Ford Escort ZX2

    1 Answer

    Where is the pcv valve located on a 2001 ford escort?


    Standing in front of the car looking at the engine, if you look to the lower right corner of the engine, it's almost hidden under the engine there.

    There is a black tube connecting to the pcv valve there, pull that up and out and you'll find hte pcv valve there.

    If you need pictures, let me know.

    Oct 04, 2009 | 2001 Ford Escort ZX2

    1 Answer

    PCV Valve on a 2001 Ford Focus


    There is a label under the hood that shows its location, otherwise just find the vacuum line going into the valve cover. Thanks

    Jun 07, 2009 | 2001 Ford Focus

    1 Answer

    Location fo pcv valve on 2001 ford ranger 4 cyclinder 2.3


    I think it is in the valve cover. see illustrations from shop manual.



    Positive Crankcase Ventilation System Overview The Positive Crankcase Ventilation (PCV) System (Figure 132)cycles crankcase gases back through the engine where they are burned. The PCV valve regulates the amount of ventilating air and blow-by gas to the intake manifold and prevents backfire from traveling into the crankcase. The PCV valve should be mounted in a vertical position. On some applications, the PCV system is connected to the evaporative emission system (refer to the VECI decal). located on the underside of the hood or on the radiator cooling fan shroud.

    crankcase ventilation tube
    d176823.gif
    1. Remove the positive crankcase vent (PCV) hose from the clips.
    cc83fb4.gif

    Apr 17, 2009 | 2001 Ford Ranger Regular Cab

    1 Answer

    Replace PCV valve 2001 taurus duratec engline rough idling when engine is cold. Engine will stop when vehicle is stopped at an intrersection. After driving for 30 plus minutes the car idles fine. Air leak?...


    I dont think it is the PCV but its a good idea to replace the PCV at least once a year either way, and its very cheap, usually $2-$5 at autozone.

    Mar 25, 2009 | 1999 Ford Taurus

    1 Answer

    How do you remove a pcv valve on a 2001 ford escape v6 3.0


    The PCV valve is at the end of a plastic or rubber hose which goes into the valve cover,, just pull it off the hose and replace with a new one.

    Jan 19, 2009 | 2004 Ford Escape

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    105 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75077 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    fordexpert

    Level 3 Expert

    5471 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...