Question about 2001 Lexus RX 300

2 Answers

Engine on, but wont move when put into gear. You can hear the engine rev up, but will not go.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Assuming automatic, the selector arm on the trans can be broken or loose and out of position, or if it is a cable system it can be broken, or check the fluid for trans, or drive shaft is busted but you would probably hear noises that are obvious. or selector arm inside center counsel or on column or on trans is popped off.

Posted on Apr 24, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexus Master
  • 14,036 Answers

Sound like transmission slipping . check transmission fluid.add to correct level.

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 ford focus manual trans wont operate.


sounds like the new clutch has failed bud

Oct 06, 2014 | 2000 Ford Focus

1 Answer

Why wont my isuzu rodeo stay in gear


there are only 3 issues here.
1 weak engine, , even 1st gear I have no engine power.
2: 1st revs normal but wont shift up.
3: the transmission slips. (flares) RPM goes nuts.

which one?

Jul 14, 2014 | 2001 Isuzu Rodeo

1 Answer

2001 buick century runs fine when in park and nutral i can put it in drive and sometime i can go 10k sometimes only get 1k the it starts spudering and wont rev up but will idle fine put it in nutral and...


I think you have an engine speed sensor fault. its not reading the engine speed or the motion speed. needs these two to change speed and ( gear). one is connected to the abs unit and the other is on the engine. usually if they both go its down to the gear box ecu. you can check if you have it on a ecu reader. will have fault codes or not be read at all.

Mar 16, 2014 | 2001 Buick Century

1 Answer

My 96 honda civic rough starts dies when put in gear


Do the throttle body cleaning and re- learn idle speed control valve.

Mar 16, 2013 | 1996 Honda Civic

1 Answer

2002 jeep grand cherokee wont reverse when in gear. hear it get into gear but wont move...


first check fluid is full by starting the engine have it blocked put in in nutral( to fill the bell houseing ) then check fluid level, more than likely you need to add fluid exspecally if your checking it in park with engine on or off park gives you a false reading on the dip stick

Jul 31, 2011 | 2001 Jeep Grand Cherokee

1 Answer

Hi i have a 96 Taurus GL with a Transmission that does not work i can put it through all gears and wont move unless you rev it up hi it well move slowly but it well move back words if you rev it a little....


Have you checked the level of the transmission oil ? The level does not have to be down much to encounter the type pf problem you are having. With the oil warm and the engine idling in neutral, the Transmission dipstick should show the level between the low and full marks.

Aug 18, 2010 | 1996 Ford Taurus

1 Answer

When i hit the gas i feel a clunk in the steering


check the motor mounts. It is possible that you are hearing the engine hit the firewall. You need yourself and one other person to perform a test. With the hood open start the engine. Put the emergency brake on and have one person stand on either side of the engine. The other person in the driver seat hold the brake pedal down hard with your left foot, put the car in gear (drive, then reverse) and rev the motor a few times. The person out side the car should look for the engine moving when the engine rpm increase.

May 25, 2010 | 2001 Chevrolet Impala

1 Answer

Car does not drive forward but works in reverse


Sad to say but your automatic transmission has bit the dust.

Jul 24, 2009 | 2004 Chevrolet Cavalier

Not finding what you are looking for?
2001 Lexus RX 300 Logo

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...