Question about 2004 Nissan 350Z
Hi hilbert, I am cleaning up some old posts if you still need help get back to me. Cheers Greg.
Posted on Feb 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: horsepower increase
Hi, you can upgrade to an K&N air filter and you can also add a chip that will electronically increase you HP threw tweaking the CPU. That should do it. Also, replacing the stock exhaust manifold with a aftermarket manifold will make this baby scream.
Please rate and god bless.
Posted on Mar 27, 2009
The current draw is going to almost double,from 4.5 amps to 8.3,I wouldn't be so worried of the wiring ,it will handle the increase as I would of the your relays as this is where the increased draw is going to have the most affect.Generally all electrical componenets are designed to handle 33% over what they are rated at,they will work but this will shorten the lifespan of your relays by as much as 50%.
Posted on May 04, 2009
The support bar right above your head has 2 elastic bands attached to it, one on the drivers side and one on the passenger side. After time they lose their elasticity and don't pull this bar (the one with the top attached to it) down when you retract. If it doesn't pull down, it will stay up (forward) as the frame retracts and get jammed up in the rest of the frame. Worst case it will pop the metal clip which holds the center of the cloth top to it (it is the length of the bar and spot welded to it) off. It will also put holes in your top on both sides as they don't fold down under and instead get crimped in the frame. Temp solution is to push that bar down as it retracts. Permanent solution is to repair the elastic sooner than later before it wrecks havoc with the whole frame and motor.
Posted on Oct 08, 2009
there is an after run module controlled by a fan switch that will run the fan if the engine compartment is hot.the switch could be shorted,or the module is bad.the fan normally runs for a few minutes then turns off.
Posted on Oct 23, 2009
Remove inner panel carefully. find 2 black circle stickers and raise glass to access 2 screws holding glass. Door vent does not need to be removed.
Posted on Feb 04, 2010
Tips for a great answer:
Jul 10, 2017 | Nissan Cars & Trucks
Jul 10, 2016 | 2004 Nissan 350Z
Feb 14, 2011 | Nissan Versa Cars & Trucks
Jan 02, 2011 | 2004 Nissan 350Z
Sep 10, 2010 | 2004 Nissan 350Z
Apr 01, 2010 | 2004 Nissan 350Z
Jan 30, 2010 | 2004 Nissan 350Z
Aug 10, 2015 | 2004 Nissan 350Z
81 people viewed this question
Usually answered in minutes!