Question about Cars & Trucks

Open Question

Need code for VW polo radio in safe mode - Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
johnny5846
  • 379 Answers

SOURCE: re setting the radio on my VW Golf

heres what u do , switch radio on , safe appears in radio display , followed by 1000 approximately 3 seconds later , input the security code found on the radio card using the station preset buttons on the radio , Button 1 corresponds to the first number in the security code , 2 is the second and so on . press the applicable button repeatedly until the desired number appears in the display , ( press button 1 three times if the first number is 3 ), when the entire code has been input and appears on the display , press the right side of the seek button for longer than 2 seconds until an audible signal is heard , ,,, if you do not get this procedure correct , in 2 attempts , the radio will lock up for 1 hour before you can try again .. if this happens , leave the radio on for minimum 1 hour without touching it , after that time you may try again ..

J5

Posted on Jan 15, 2009

Ad
  • 34 Answers

SOURCE: Changed battery in 2004 VW Passat - radio is completely dead

there is another fuse at the back of the radio. if that fuse is ok check if there is power comeing to the radio if there is u will need a new radio

Posted on May 11, 2009

  • 2 Answers

SOURCE: 98 VW Beetle used-no radio code- I have radio & car serial #'s...

I assume you have this unlocked by now, but here's an answer for someone else for the future :-)
if you have the original radio that come with the car, look in the wheel well in the trunk, where the spare tire goes. (yep, you'll need to stand on your head). there is a sticker that will have the 4-digit code on it.
enter that into the radio.
I can't remember off the top of my head which one it is, but either the >> Scan or the am/fm button will be the "enter key"

Posted on May 26, 2009

  • 21 Answers

SOURCE: MY VW POLO SHOWS FAULT CODE ; P0106 ABSOLUTE MANIFOLD PRESSURE SE

this a map sensor, probably just need the sensor replaced, it measurese intake vaccum and adjusts air/fuel mixture accordingly

Posted on Oct 07, 2009

Testimonial: "MANY THANKS TO HONDABOY 47. SPOT - ON. PROBLEM SOLVED!"

  • 1 Answer

SOURCE: vw golf .... alpha...... safe 2

"2 safe" means that your radio was in safe mode, and then the code was improperly entered 2 times. you either need to disconnect your battery and leave it for up to 4 hours (i've been told), or leave your key in the ignition for around an hour.

once it comes out of "2 safe" mode, then it will just say SAFE and give you the numbers 1-0-0-0. You just need to enter the 4 digit code (using your pre-set numbers 1-2-3-4 to change the numbers), then hold the seek > button and your radio should come on.

If you don't have the code, call VW. they'll find your code for free. they did for me. if not they'll charge like $50 or something.

Posted on Apr 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a vw jetta 2008 out of safe mode 2?


Usually has to be left switched on in safe mode for several hours before the code can be retried.

Aug 26, 2014 | Cars & Trucks

1 Answer

Vw polo classic radio stucked in safe mode even after entering the radio code? i tried it over n over again nd it goes through the same process of safe1 nd safe2 respectively? plz help


If you kept putting in the code and it went into Safe mode...did you not consider that the code was wrong?
Every time you put in the wrong code, the stereo will lock you out for longer each time...in fact, some units will never work again unless specialist replaces security chip.
You need to verify the stereo code by either using a code cracker...ebay...or..go to your local trusted Garage and let them sort it for you.
Roger

May 05, 2014 | Cars & Trucks

1 Answer

Hi, mi vw polo radio cnt gt out of safe mode or play even after entering the code 0163.i am totally confused now and i cnt get the serial number of the radio whn inspecting it.it is scratched and cant read...


Hi
It may be cheaper to just fit a replacement stereo unit.
I cant see why a stamped serial number would be damaged on a stereo....it dont touch anything...unless its been deliberatly damaged.
Fit a new stereo..very easy and prob a better sound quality.
Roger

May 05, 2014 | Cars & Trucks

1 Answer

Vw polo 2007 , i changd the battert n now radio displays safe,1000 n dont play?


You have to get the security code from a VW Dealer.

Some will do it for free, especially if you have a relationship with them. You can also try your favorite independent VW shop and they can get it from a dealer for you.

Make sure you keep the code in a safe place.

Apr 30, 2014 | Cars & Trucks

1 Answer

Safe mode car radio


To unlock your VW factory radio from "SAFE" mode, you will need to enter the radio code. Typically, the code is written on a radio card included with the documentation for the vehicle when the car is first sold.

If you don't have the code, or have lost it, you can retrieve it by visiting your VW dealer. You will need the car's VIN number and the serial number of the radio (located on the body of the radio).

The procedure to enter the code is as follows:

Press the "MODE" and "SCAN" buttons simultaneously and hold them until "1000" appears on the radio display. Release the buttons as soon as this number appears.

Refer to your Radio Card and use the station preset buttons ("1", "2", "3" and "4") to input the code. Press the "1" button repeatedly to input the first digit, the "2" button to input the second digit, etc.

Press and hold the "MODE" and "SCAN" buttons simultaneously until "SAFE" appears again. Release, and the radio should be unlocked.

Do not enter the wrong code more than three times, or the radio will lock itself. Note the dealer can also enter the code for you (they may charge a small fee).

Oct 17, 2013 | Volkswagen Cars & Trucks

2 Answers

I lost my radio code for 2007 citi golf 1.4 now is in safe mode


2007 VW Golf Rabbit I HAVE THIS TIPE OF RADIO ON MY CAR AND I HAVE THE CODE # 0881 . CAN ANY ONE HELP ME Code Entering STEPS PLEASE
POUTCHIUSA@GMAIL.COM
lost-radio-code-2007-citi-golf-1-4-now-5tfmgp03zsfdrclfgmpn1ukz-2-0.jpg

Mar 05, 2013 | 2007 Volkswagen Golf

1 Answer

My 1998 vw beetle its stuck on 2 safe mode i need help getting that out thanks


First of all you should exit from 2 safe mode. Then turn ON the radio and let it turned ON for at least one hour, in order to exit from 2 safe mode.

IMPORTANT NOTE:
You must have the security anti-theft code for your VW radio from the car manufacturer, or from a VW dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of VW radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Sep 13, 2011 | 1998 Volkswagen Beetle

2 Answers

I have a VW golf 1999 but I cannot get the safe mode off the radio. Struck in mode with the number 2 in the lethand corner. Any suggestions on how to fix?


IMPORTANT NOTE: You must have the security anti-theft code for your VW radio from the car manufacturer, or from an VW dealer!

The sequence of programming for VW radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
3. By the #1 key you will set up the first safe code digit.
4. By the #2 key you will set up the second safe code digit.
5. By the #3 key you will set up the third safe code digit.
6. By the #4 key you will set up the four-th safe code digit.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Jan 02, 2011 | 2001 Volkswagen Golf

2 Answers

Vw golf .... alpha...... safe 2


"2 safe" means that your radio was in safe mode, and then the code was improperly entered 2 times. you either need to disconnect your battery and leave it for up to 4 hours (i've been told), or leave your key in the ignition for around an hour.

once it comes out of "2 safe" mode, then it will just say SAFE and give you the numbers 1-0-0-0. You just need to enter the 4 digit code (using your pre-set numbers 1-2-3-4 to change the numbers), then hold the seek > button and your radio should come on.

If you don't have the code, call VW. they'll find your code for free. they did for me. if not they'll charge like $50 or something.

Dec 24, 2008 | 1997 Volkswagen Golf

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...