Question about 1999 Ford Explorer

Open Question

Fuse for 1998 ford explorer sport license plate lamps - what number is it?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: 1998 Ford Explorer sport 4.0L 4x2 PCV Valve Location

the pcv is located on the rear(firewall) of the drivers side valve cover.turn counterclockwise and pull to remove be careful there are 2 small tabs inside the pcv hole in the valve cover(can feel with small finger) this is to hold valve in place so it wont leak.if you have a oil leak at the pcv a quick fix is to put a small amount of silicone around the pcv o-ring and install.wait hours for silicone to set up.

Posted on Oct 21, 2008

Ad
  • 6 Answers

SOURCE: 2001 Ford Explorer Sport Fog Lamps

The light on your interior button should only come on when the lights are on, so I wouldn't worry about that until the lights are fixed. There should be a relay for your fog lights. I would check your underhood fuse relay box. switch that relay with another, such as fuel pump. I lights come on and now vehicle won't start, you know that it is the relay you have now put in your fuel pump circuit from your fog lamp circuit.

Posted on Dec 16, 2008

  • 91 Answers

SOURCE: Need fuse diagram for 98 Ford Explorer Sport

If your radio does not diplay but works it is the kcd display seen many of these with this issue new radio will correct this concern no fuses for the display

Posted on Apr 27, 2009

ronaldo_ross
  • 1056 Answers

SOURCE: fuse number for turn signals on a 2002 ford explorer sport trac

It should say it on the fuse box cover. Unless you dont have the fuse box cover anymore.

Posted on Aug 13, 2009

  • 194 Answers

SOURCE: What number is the license plate light fuse on

look in you owners manual or on the cover of the fuse box. but if it's the only thing not working then it may be the bulbs or a bad conection for the hot or the ground.

Posted on Nov 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse goes to tag lights on 98 ford explorer


Which fuse belong to license plate light or which number ...

www.fixya.com/cars/t10801433-fuse_belong_license_plate_light_or
Nov 11, 2011 - The licence plate lights are in the same line as your tail light wiring assembly. I assume your ... Previous owner cut wires going to lights for license plate. ... 1996 ford explorer license plate fuse ... 09@1998 ford f150 fuse box.

1997 Ford license plate lights are not working. - Ford Explorer ...

www.explorerforum.com > ... > Performance Lighting

Mar 13, 2011 - 5 posts - ‎4 authors
can anyone tell me why my lights would not be working on my license plate, i replaced old bulbs with new bulbs and checked every fuse and ... Parking lights stay on
19 posts
Sep 5, 2012
my tail lights wont work, and im out of ideas. i need help ...
18 posts
Sep 15, 2011
License Plate Lights
11 posts
Mar 24, 2011
trailer light problem
15 posts
Apr 22, 2009
More results from www.explorerforum.com

Dec 10, 2015 | Ford Cars & Trucks

1 Answer

Need to replace fuse for license plate bulbs for 2010 Ford Edge SEL....What fuse number is it?


normally the number plate light is on the same fuse as the park lights . I would be looking for a fault in the number plate area ( broken wire or blown bulb or bad/ no earth)

Dec 06, 2013 | Nissan Quest Cars & Trucks

1 Answer

Where is the fuse for the plate number light ford escape 2003


I have found that the cars with which I have experience use the same fuse for the license plate light as is used for the tail lights. Not sure why or if yours is different.
So, if the tail lights work and the license plate light doesn't, then the problem can usually be resolved by confirming that the wire is properly connected, cleaning the contacts and replacing the lamp.

Dec 25, 2012 | 2003 Ford Escape

1 Answer

Where is the fuse for the license plate lamp located


I'll tell you where the fuse is but I want to mention that if it is just the license plate lamps that are out you may have other problems. The fuse you are looking for also controls the power to the left & right back up lamps, the right park & stop lamps and I think the left turn signal but don't quote me on that. So as you can see this fuse covers more then just the lamps for the license plate. Anyhow the fuse you are looking for is in the fuse box located to the left of the steering wheel by the brake pedel. It is in the number 7 position (see picture below) and is a 15 amp blue fuse. I hope this helped and good luck.

clifford224_54.jpg

Feb 21, 2011 | 1999 Ford Windstar

2 Answers

My fuse box cover has numbers to show what fuses go to what, I need a list of the numbers


1. 15 AMP Dome Lamps, Power mirrors (on 2 door models only), radio memory
2. 6 AMP front washer/ wiper
3. not used
4. 15 AMP stop lamps, 4 way flasher
5. 15 AMP back-up lamps, daytime running lights, rear defrost, turn lamps and turn indicator
6. 10 AMP speed control
7. 15 AMP instrument cluster warning lamps (explorer limited model #7 is 15 AMP heated outside mirrors)
8. 20 AMP horn
9. 10 AMP air conditioner switches, clutch coil
10. 15 AMP Park/ license plate lamps, trailer tow connection
11. 15 AMP radio
12. 20 AMP cigarette lighter, flash bright lights(from signal arm)
13. 10 AMP instrument panel illumination
14. 30 AMP power windows
15. 10 AMP ABS module
16. 20 AMP premium radio amplifier
17. 15 AMP rear washer/ wiper (explorer limited model #17 is 15 AMP warning gauges and lamps, 4 wheel drive)
18. 15 AMP heated exhaust gas oxygen

that's you list. hope it helps.

Aug 26, 2010 | 1992 Ford Explorer

1 Answer

Change tag light bulb


  1. Remove two screws retaining the lamp to the rear license plate lamp shield.
  1. Rotate socket one quarter turn from backside of lamp and remove the miniature bulb (13466) .

  1. Install new miniature bulb into socket.
  1. Install socket in lamp .
  1. Secure lamp to rear license plate lamp shield with two screws and tighten to 2 Nm (18 lb-in).


    ak1473a.gif


    Item Part Number Description 1 13508 Rear License Plate Lamp Shield 2 14A583 Lamp Lead Wire 3 383356-S Nut (4 Req'd) 4 56000-S Screw (4 Req'd) 5 13550 Lamp (2 Req'd) 6 13466 Miniature Bulb (2 Req'd) A — Tighten to 2 Nm (18 Lb-In)

Feb 27, 2010 | 1998 Ford Windstar

1 Answer

Need to replace the fuse for the license plate lights on 1998 Ford Expedition. What number is the fuse?


Hi,

Fuse # 4 (5A) in the fuse panel powers the Park Lamp circuit.

If the fuse is ok, then you'll need to inspect the relay, or check for a short in the circuit.

Dec 05, 2009 | 1998 Ford Expedition

1 Answer

Need to replace license plate lights on 95 ford explorer. can't reach underneath the bumper. does the plastic assembly just twist off?


  1. From underneath the rear of the vehicle, grasp the lamp socket and rotate it 1/4 turn.
  2. Pull the lamp socket from the lens.
  3. Pull the bulb from the socket
  4. Installation is the reverse of the removal procedure.

3761db9.gif
Exploded view of the rear license plate light assembly-step bumper shown, other styles are similar

Oct 20, 2009 | 1995 Ford Explorer

1 Answer

How do I change the rear license plate light bulbs?


License Plate Lights Removal & Installation License plate lamp retainer clips
a555c7b.gif
To Remove:
Remove or disconnect the following:
  1. License plate
  2. Pin-type retainers and the luggage compartment lid trim panel
  3. License plate lamp electrical connector
  4. Lamp socket from the license plate lamp
  5. Using a suitable tool, through the access hole, release the clips and remove the license plate lamp
To Install:
  1. Install or connect the following:
  2. License plate lamp
  3. Lamp socket to the license plate lamp
  4. Electrical connector
  5. Luggage compartment lid trim panel
  6. License plate

Jun 06, 2009 | 2000 Lincoln LS

1 Answer

1996 ford explorer license plate fuse


I'm not to sure what one you did want license plate light or the tag light up high above your back door. I know I am reading license plate so I will say the fuse needs to be replaced. plate lamps need 2 light bulbs and the fuse box is under the steering wheel or under the hood there are 2.
in my book it said that it is a (194 trade number), I woulds change out bulbs and then fuse.

Jul 31, 2008 | 1999 Ford Explorer

Not finding what you are looking for?
1999 Ford Explorer Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...