Question about Lexus IS 300
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: lexus is300 headlamp adjustment
Is the car lowered? mine does that too but is has 1.4 inch lowering springs. i readjusted the hight of the lights manually and they work fine now.
Posted on Oct 17, 2008
on some of the newer cars they dont have dipsticks they have a plug near the pan that you have to pull on the trans to check the fluid level and to fill it there is a cap hidden on top of the trans by all the stuff you have to try to bend a funnel around to get in it. dont you love the engineers
Posted on Nov 19, 2008
There will be two plugs located on the side of your transmission. One will be above the halfway point and one will be near the bottom. The bottom is your drain plug and the upper one is the fill plug. You'll want to open the fill plug and pour the fluid in (make sure you have something to catch the excess) until it starts to overflow, then seal up the plug and that's it
Posted on Oct 09, 2009
If you are looking to add transmission fluid you will need to first purchase a fluid pump at your local car repair store. Most run between $10 and 25$. For best results, run your car for a few minutes to bring the fluids to operating temperatures before attempting to add fluid. Be careful of hot surfaces and liquids.
Remove the top most bolt on the automatic transmission fluid pan (most use a 3/4 inch socket). Using the fluid pump, slowly add transmission fluid until it starts to drip out. Replace the bolt. Take care not to over tighten the bolt.
If you want to be thorough, start your car and while your foot is on the brake, run your transmission through the gears slowly. Turn off your car. Remove the fill bolt and check the fluid level again.
Posted on Feb 07, 2010
SOURCE: how to check and add
Im guessing this is an automatic, theres a trany dipstick, engine should be at operating temp and the truck level remove the dip stick and wipe clean then reinsert and pull out the fluid should be in the hass maxs. if this truck is manual trans then the trany is checked from under the truck, remove the fill plug on the side of the trany and fill unttil oil runs out the fill hole. hope this helps.
Posted on Oct 18, 2010
Tips for a great answer:
May 04, 2012 | 2010 Lexus RX 350
Mar 10, 2011 | 2001 Lexus IS 300
Feb 17, 2011 | Lexus IS 300 Cars & Trucks
Dec 20, 2010 | 2001 Lexus IS 300
Dec 06, 2010 | 2001 Lexus IS 300
Aug 19, 2010 | 2001 Lexus IS 300
Mar 21, 2010 | 2003 Lexus IS 300
Feb 07, 2010 | 2001 Lexus IS 300
Dec 13, 2009 | 2001 Lexus ES 300
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: