Question about 1989 Buick Skyhawk

Open Question

91 olds cutlass supreme crank sensor position

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My 1995 Olds Cutlass Supreme SL just died and quit working, what could be the problem? Have replaced the coil pack.


Does it crank over at all? or just nothing when you turn the key? Do all the electronics still work in car?

Jan 12, 2011 | 1995 Oldsmobile Cutlass Supreme

2 Answers

Not getting spark


could be you have a crank sensor problem it s located behind the engine good luck

Jun 19, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

My 1993 cutlas supreme stalls randomly while idling or driving , but restart right away


You will need to change the crank position sensor first and see if it corrects the problem. It is located behind the engine near the firewall. It's a bit tricky to get to it, you would need to rotate the engine forward then look under the exhaust manifold and under the cylinder closest to the drivers side. Use a 10 mm deep socket to loosen bolt. After replacement and it is still stalling then you will need to replace the ECM (vehicle computer). If it turns out to be the computer, go to your local junkyard to get an inexpensive replacement Click on the link below to view the CPS, it is around $22

http://www.partstrain.com/store/?N=0&Nr=AND(make:Oldsmobile,model:Cutlass+Supreme,year:1993,brand:Delphi,part:Crank+Position+Sensor)&ptc=S1171391678W45d204bec356b&ptid=ptc45891f6tnywz&id=Olqtv7cphi





Olds-Cutlass-Ciera.htm">http://en.allexperts.com/q/Oldsmobile-Buick-Repair-826/f/1992-Olds-Cutlass-Ciera.htm

Apr 12, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Cant find timing marks on camshaft sprockets on 91 olds cutlass supreme 3.4 doh. need diagram to line up marks


THE MARKS SHOULD BE MARKED AT THE OUTTER SURFACE OF THE CAM SPROCKETS THERES 4 TOTAL ON THE CAMS AND TWO ON THE CRANK. GOOD LUCK THIS PICTURE IS RIGHT OUT OF MY TIMING MARK BOOK......bc3b21f.jpg2

Jan 23, 2010 | 1991 Oldsmobile Cutlass Supreme

1 Answer

89 olds cutlass supreme hard time turning over


My 89 olds cutlass did the same thing....Shop fixed her, they replaced the knock sensor....I also had the fuel filter replaced, they sold me a can of MG injector cleaner too..Out on the highway the service engine light would come on and she would cut out under a load....Then she would crank but not start ( she would start eventually).....Runs great now....bill was $250

Aug 18, 2009 | 1993 Oldsmobile Cutlass Supreme

4 Answers

1990 Olds cutlass supreme 6cyl 3.1 engine; motor starter works ok


1990 OLDSMOBILE 3.1 6 CYLINDER ENGINE I WOULD LIKE TO KNOW LOCATION ON ENGINE WHARE CRANKSHAFT POSITION SENSOR IS LOCATED

Jun 12, 2009 | 1990 Oldsmobile Cutlass Supreme Conv

1 Answer

Crank sensor location


It is on the back side of engine near the exhaust pipe. Has a plug in type wire on it.

Mar 01, 2009 | 1989 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...