1994 Chevrolet S-10 Blazer Logo

Related Topics:

A
Anonymous Posted on Oct 13, 2013

Locked keys in 1994 full size chevy blazer how to slim jim ?

5 Related Answers

Anonymous

  • 111 Answers
  • Posted on Mar 16, 2009

SOURCE: replace a steering column on 1989 chevy k5 blazer

The best thing to do is to buy a Chilton,s repair manual. It has step by step procedures. You can get one at most auto parts stores. They coast anywhere from $10-$30 dollars.

Ad

Anonymous

  • 3 Answers
  • Posted on Apr 19, 2009

SOURCE: how to use slim jim

ok well first off do you know anyone that has a truck close to the same year if so try using there key it should work to open your door and on how to use a slim jim depends on if you have power locks or not if so it's a bit harder than if you don't but you put it between the window and the rubber seal and slip it under the door locking bar ether up and forword or back if its a manual lock and if not you haft to move the slim about 2 to 5 inches from the lock and do the same good luck

Anonymous

  • 1 Answer
  • Posted on Jun 21, 2009

SOURCE: locked out of 96 chevy cavalier

You can use a wire hanger with a hook bent onto the end fairly easily if you slide it down the window and try to feel around to hook onto the lock mechanism. It may take a bit of patience, but I got into my 2000 with not too much trouble. Then do what I did immediately afterwards - get another key cut to keep in your wallet...

Anonymous

  • 84 Answers
  • Posted on Oct 26, 2009

SOURCE: lock keys in 01 chevy s10. will a slim jim

not unless your really good at it, get a wooden wedge and pry the top corner of your door open enough to get a wire in to pop the lock. it wont hurt your door

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Dec 17, 2009

SOURCE: locked keys in a chevy colorado, manual locks can

yes it can be opened with a slim jim, but it is not that easy, u really need to know where to put the toll and how to move it, a locksmith can do it quickly

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I locked keys in car, still in the ignition of my 2010 Chevy Malibu. Where should I place the slim Jim to unlock door.

Best bet is to call a lock smith and have him get in the car for you. Later model cars are designed to prevent slim jim from working in mast cases. The cost of the locksmith will be small compared to the possible damage and having to replace broken window, linkage or wiring in the door.
0helpful
3answers

Locked my keys in my 2011 chevy silverado

Align the slim jim with the lock and push it downwards towards the keyhole.When you see the lock start to move, pull the slim jim upward slowly until the door unlocks.
0helpful
1answer

How to slim jim a 2004 chevy silverado truck

Put the slim jim in the wedge within the window, align it with the lock and then push down on it towards the keyhole-this can get you back in the car.
0helpful
1answer

How do I unlock my 2008 chevy silverado with a Slim Jim

First, align the slim jim with the lock and push it inwards in the direction of the keyhole when the lock is visible - pull the slim jim upward slowly until the door unlocks.
0helpful
1answer

My 1996 blazer has a dead battery and the electronic door locks won't work. How do i get in to my blazer to open my hood?

use the key drivers side still has a key[manual open ] hole if u dont have a key will to slim jim the door call a service station or lock smith
0helpful
1answer
0helpful
1answer

I need a lock assembly for a 1999 Chevy Blazer full size, driver's side door.What should i do?

any parts store should sell them however will have different key unless u have a locksmith rekey or change all locks

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/joseph_f4ed739f62995525

4helpful
1answer

How to use slim jim

ok well first off do you know anyone that has a truck close to the same year if so try using there key it should work to open your door and on how to use a slim jim depends on if you have power locks or not if so it's a bit harder than if you don't but you put it between the window and the rubber seal and slip it under the door locking bar ether up and forword or back if its a manual lock and if not you haft to move the slim about 2 to 5 inches from the lock and do the same good luck
2helpful
1answer

LOCKED KEYS

I guess this is the beauty of ONSTAR. If you are an original owner, you can go to your Chevy dealer with ID , and they'll make you a key. So much for the CLEAN way , now, you can try with a slim jim, or with power door locks, and if you are good with a hanger wire , try reaching the door lock UNLOCK switch. Its tricky but do able. Hope this helps
Not finding what you are looking for?

495 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...