Question about Cars & Trucks

Open Question

Where is neutral safety switch in Hyundai santa fe?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

Ad
goalie39
  • 469 Answers

SOURCE: ''check engine light'' illuminated, 1004 Hyundai, Santa Fe

If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.

Hope this is of some help.
Ed

Posted on Apr 21, 2009

emissionwiz
  • 76846 Answers

SOURCE: PROGRAM KEYFOB FOR HYUNDAI SANTA FE

This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.

Posted on May 22, 2009

michigan man
  • 3533 Answers

SOURCE: how to change blower motor in a 2003 hyundai santa fe

try these two websites www.alldatadiy.com and www.autozone.com and you should be able to get pictures and diagrams showing you how to repair your truck

Posted on Aug 02, 2009

  • 84 Answers

SOURCE: Change serpentine belt 2004 Hyundai Santa Fe

it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,

Posted on Oct 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of neutral safety switch


Not sure about yours for sure but normally the neutral switch in American made cars are on the steering column by the floor pan and it is I/2 moon shaped. Hope this helps. Are you sure the switch is bad or is it the starter solenoid or the starter itself.

May 08, 2015 | 2001 Hyundai Santa Fe

2 Answers

Where is the neutral safety switch located?


Have you replaced the alternater.....that powers the starter

Jul 13, 2014 | 2003 Hyundai Santa Fe

1 Answer

How is the nuetral safety switch on a Hyundia Santa fe 06? I believe if I'm facing the car its accessible on the left side. I removed the skid plate but can't locate it.


First we need to make sure that its the neutral safety switch how did you come about that conclusion? Try this next time it will not start shift the gear into neutral and try to start it again if it starts every time you shift to neutral I would say yes start with your neutral safety switch. Your neutral safety switch is incorporated with your transmission range sensor located on the transmission follow the transmission linkage to the transmission there you should find the neutral safety switch usually black in color made of plastic with a wire harness connected to it you could get someone to shift it for you while you look to make sure you are looking at the right part.

May 26, 2014 | Hyundai Santa Fe Cars & Trucks

1 Answer

2001 hyundai santa fe starts with one crank but won't go into drive or reverse, only goes into park and neutural what could be the problem? i have a 2001 hyundai santa fe 2.7 l v6 all wheel drive


You do have drive and reverse,if you have park and neutral.It just the transmission cant transfer that power a new or rebuilt is the solution

Mar 20, 2012 | 2001 Hyundai Santa Fe

1 Answer

I have a 2003 hyundai santa fe 2.7 litres i went to the store shut the car off and when i turned it back on it would not come out of park i cant get it to shift at all i had to get it towed home


you have a neutral start safety switch on that vehicle,, This factory part has a part number of 42700-39055, its not working correctly, Check at the top of the brake pedal you should see either one, or possibly 2 switches, ( some models have them combined) see if the plunger in that switch is operation when you apply the brake, if so,, its bad on the inside, remove and replace it

Sep 08, 2011 | 2003 Hyundai Santa Fe

1 Answer

Hi, i have a hyundai santa fe 2000 auto. sometimes i cannot start the car and other times i can. If i put it into neutral it starts and today it was acting up again when i was driving in auto so i...


HI Sandra

First let me start with explaining what they mean by " the inhibitor switch" . This device is really called the neutral safety switch. It's called that because the function of this switch is to prevent the vehicle from being started while the shift lever is in drive, reverse or any of the lower gears. Meaning that the car can only be started while the shifter is in park or neutral. This is only a safety device. What your problem sounds like is that this switch is not positioned correctly. When the switch is in the right position it recognizes if the car is in park or neutral or in gear. if adjusted correctly (and it's only a matter of millimeters) the car starts in park or neutral. if it's out of position (which is what your problem sounds like it wont let the car start). All that needs to be done is to position the switch correctly. Of course there is always the outside chance that the switch itself if faulty, still this is far from a costly repair. Go to a transmission shop and tell them you need your safety neutral switch adjusted because the car will not start in park sometimes. This should cost you at the most $30. Unless the switch is bad, the of course it could be as much as $200 to replace. I hope this helps you.

Sep 03, 2011 | 2001 Hyundai Santa Fe

1 Answer

I have a Hyundai Santa Fe 2001, 6 cylinders. The


Hi
It sounds like the transmission slipped. You need have the vehicle check for trouble codes and the trans. fluid level.

Steve

Jan 29, 2010 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...