Question about Cars & Trucks

Open Question

2007 suzuki eiger 400 valve adjustment - Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

new2wales
  • 144 Answers

SOURCE: WHERE does the antifreeze go in Suzuki eiger 400 4x4 05 go? I don't see an radiator cap or anything

there will be an expansion tank that hold/refill the coolant , look for plastic tank could be round , square beside rad , with coolant hoses to it , make sure engine cold when removing cap, will need to drain old coolant before refilling with new , worth checking the coolant strenght before draining as may still be ok

Posted on Jun 08, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE does the antifreeze go in Suzuki eiger 400 4x4 05 go? I don't see an radiator cap or anything


there will be an expansion tank that hold/refill the coolant , look for plastic tank could be round , square beside rad , with coolant hoses to it , make sure engine cold when removing cap, will need to drain old coolant before refilling with new , worth checking the coolant strenght before draining as may still be ok

Jun 08, 2017 | Suzuki Cars & Trucks

1 Answer

Need valve lash specs for 1980 suzuki dr400


Suzuki DR400S - Motorcycle Specs

www.motorcyclespecs.co.za/model/suzu/suzuki_dr400s%2080.ht
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
www.youtube.com/watch?v=BH-KFrpwo3w
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

Nov 01, 2015 | Suzuki Cars & Trucks

1 Answer

Where is evap actuator valve located on 2007 Suzuki sx4 2.0 ?


evap actuator valve
fuel evap system.
or HVAC, evap core. (expansion valve or aka, evap valve)
try to start a topic saying system
first
like fuel
or HVAC.

or 10 times better lead off with SYMPTOMS?

Apr 16, 2015 | 2007 Suzuki SX4

2 Answers

How I adjust valve on 96 Geo Metro 3 cylinders?


You need to replace the valve came bearing for that valve if it's a Suzuki 1.0 engine. Easy to do.

Feb 12, 2015 | 1996 Geo Metro

1 Answer

Why would suzuki forenza stall at a stop


Turn the ignition and start the Suzuki Eiger. If the engine has difficulty starting or will not start at all, there may be a problem in the electrical or starting system. Remove the spark plug wire from the spark plug and remove the spark plug from the engine using a spark plug wrench. You can replace the spark plug or use a wire brush and gap tool to clean and re-gap the spark plug. Insert and tighten the spark plug, reattach the spark plug wire and try to restart the engine. Remove the battery cables from the battery and attach a battery meter to the battery. Observe the amount of charge the battery is holding and if the meter has a test feature, test the battery to see if it will dispense the correct amount of power. Clean the battery contacts with a wire brush and reconnect the battery cables. Check the oil, gas, transmission and brake fluid levels on the Suzuki Eiger. If there is not enough gas in the ATV, it will not start. Checking the fluids regularly to see if there are any leaks or if any of the fluids are dangerously low. Top up any fluids that may be low before you use the ATV. Adjust the fuel idle mixture screw on the Suzuki Eiger's carburetor if the engine is running rough. Inspect the air intake and exhaust pipe for the Suzuki Eiger. Any blockage in or on these components can affect engine performance. OBD2 PROMOTION FindOBD2 com

Aug 15, 2014 | Cars & Trucks

1 Answer

How to adjust valves on 2002 suzuki car Grand Vitara XL


no engine, stated. no joy.
sorry.
some have 3 engines that year.
the 2.0 and 2.5L are all HLAs and there is no lash
but you said, valves, adjust what> do say what.
time the cam.? we cant guess what you are doing
why not just flat say so.????
eg.my valve covers are ticking ? or the cam cover, or what.
use a $5 stethoscope and listen and no more guessing where.

Jul 08, 2014 | 2002 Suzuki Vitara

1 Answer

How could i find a/c orifice tube in mt 2007 Suzuki Forenza


old post.
in the evap expansion valve.
in the HVAC, A/C evaporator core, very close to there, for reasons of physics.

Jun 04, 2014 | Suzuki Forenza Cars & Trucks

1 Answer

2000 suzuki 400


Try to give it a good whack with a rubber/plastic mallet. It's probably just the gasket holding it on there real tight and you'll want to replace that gasket before you put the TB back on.

Aug 20, 2008 | 2001 Suzuki Xl 7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...