Question about Cars & Trucks

Open Question

Hi why is the kickstart on my Honda c90 very stiff and hard to engage thanks John

Posted by Anonymous on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Grand vitara 5 speed manual stiff to change when warm

what is stiff (add a noun here)
clutch pedal stiff
shifter lever stiff.
grinds , a bad clutch will make the lever seem stiff or will grind, if forced.
gears balk? same as stiff.
false neutrals. (slips , gear not engaging)

Nov 07, 2016 | Suzuki Grand Vitara Cars & Trucks

1 Answer

I have 2010 crv with 102k on the clock I am finding the clutch peddle stiff

When the clutch pedal starts to feel stiff and hard to deptress it means that you will need to replace the clutch, the friction disk is worn out.

Oct 26, 2016 | 2010 Honda CR-V

1 Answer

Power steering stiff after recon steering turns pump works steering stay stiff and hard no power steering even if you start the engine

Check the drive belt to the power steering pump and the level of fluid in the power steering reservoir.

Feb 18, 2014 | 1996 Honda Prelude

1 Answer

Stiff and slow driver-side window (not regulator)

Try lubricating the glass run channels with silicone spray.

Apr 26, 2013 | 2000 Honda Civic

1 Answer

2003 honda accord 2.4 power stering hard,replace pump got little softer but still hard

The steering is controlled by the steering rack,
& they get stiff because no one changes the fluid
every 3 years

The upper strut bearings fail & make steering stiff

Doubt the pump was a problem at all

Mar 03, 2013 | Cars & Trucks

1 Answer

1993 toyota pickup hood hinge stiff/binding

Hi Cg, Not sure which Toyota you have? The Hilux has bolts from the hinge into the hood. There are two on each side and adjustments can be carried out by loosening these four. Regards John

Aug 30, 2012 | 1993 Toyota Pickup

1 Answer

My 1990 honda crx clutch is very hard, after i changed it.. i have a crx transmission and 1999 civic engine. should i have bought the clutch for the transmission or the engine?

Generally that stiffness is due to a failed clutch cover (engine side). the pressure fingers inside lose their ability to compress and throw out sufficiently. I have had mixed results with aftermarket pressure plates as many are stiff right out of the carton. If you can afford,use honda oem parts for best results and dont forget to include the bearing

Jul 24, 2009 | Honda CRX Cars & Trucks

1 Answer

1998 Honda Accord transmission problem

This transmission have shift solenoids that are mounted on the outside in my personal experience I have rectified shift problem with these transmissions by simply change a solenoid or two. My recommendation is to put this vehicle on a code scanner and find out what is at fault first. If its a solenoid just replace, they are a dealer only part and that should take care of your problem. Good Luck and thanks for using FIX YA

Jan 01, 2009 | 1998 Honda Accord

2 Answers

2007 Nissan Xterra Offroad Cltch replacment

$2800?!?!?!?!?!!!!!!! HOPE THAT IS A MISPRINT
if it is feeling different then something is not right. the amount of travel should not change
you may have a slave cylinder problem or your clutch release fork has popped off the pivot ball

Sep 22, 2008 | 2006 Nissan Xterra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides