Question about 2007 Buick Lucerne CXL
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First hook up Positive Red and Negative Black terminals to the battery in the known good car. Then hook the Red terminal on the opposite end of the jumper cables to the positive Red terminal of the battery in the known bad car. Then, carefully, without shorting out the connectors, connect the final black jumper cable to the 'frame' of the known bad car.
Hope this helps.
Posted on Jul 13, 2010
SOURCE: My 2007 Buick Lucerne drivers
first purchase the door handle assembly then remove the door panel. make sure the window is up and reach in and disconnect the rods making a note of which one goes to which one. unbolt the door handle and remove. the new door handle may come with a new rubber seal for it. position over new handle and reinstall. make sure to search the door panel for hidden screws holding it on before you pop the clips.. hope this helps
Posted on Feb 05, 2011
Hi Dear Lov, Remove the plugs from the arm rest and behind them there will be deep seated screws. Push in a long screw driver and remove them. Next lift the window control buttons and when removed from the housings disconnect the electrics. (Keep the switches handy) next take a flat blade tool and starting at the bottom of the door, insert the blade between the panel and the door and gently pull the blade towards you. When the studs pop move to the next until all are released. Lift the panel off and then refit the switch to the cables. Reach inside the door and feel for the operating rods which extend from the handle to the latch mechanism. at each end you will feel plastic clips which will rotate away from the rods when pushed in the same plain. These clips beak easily so be careful. It is worth getting a mirror and flash light and studying them before trying to release them. Check both sides as the mechanism may be different at each end. Once disconnected you will notice two hole opposite the exterior door handle, through which a socket spanner fitted to an extension will fit. Remove the nuts and then remove the handle from the outside. When fitting everything back together make sure the rods are correctly fitted. You may find you need to lift or lower the window, or maybe remove it completely to do the job. Regards John
Posted on Feb 11, 2012
Testimonial: "Thanks johngee"
Tips for a great answer:
Oct 17, 2016 | 2007 Buick Lucerne CX
Aug 08, 2015 | 2007 Buick Lucerne
Feb 23, 2015 | 2007 Buick Lucerne CXL
Dec 15, 2014 | 2007 Buick Lucerne
Dec 09, 2014 | 2007 Buick Lucerne
Nov 12, 2014 | 2007 Buick Lucerne
Sep 17, 2014 | 2007 Buick Lucerne
Jan 19, 2013 | 2007 Buick Lucerne CXL
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: