Question about 1998 Suzuki Esteem

1 Answer

Turn signals arent flashing. where does the part to replace them go?

The turn signals are not working.. they wont flash. I went to get a part at auto parts but no one is able to find where this part goes... Do you guys know where? auto parts has two diifferent parts. a round one and a squared one. which one is it?

Posted by on

  • jjwood1978 May 11, 2009

    Turn signals aren't flashing. None of the bulbs are blown as they remain solid on both sides and front and back when the turn signal is engaged. Same situation with the hazards. I purchased the replacement part as advised at a Pep Boys, however I can't find the part on the car anywhere. I've search both under the hood and under the driver side dash. Any feedback would be greatly appreciated.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Call a suzuki dealer, sounds lik you need flasher relay

Posted on Apr 24, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 tp cruiser turn signals wont flash

check the flasher relays in the fuse box. these are what causes the lights to flash.

Feb 11, 2014 | Chrysler Cars & Trucks

1 Answer

My right turn signal isn't working correctly. When I'm driving down the road my dashboard indicator for my right turn signal will turn solid green but wont flash, But when i turn my...

I had the same problem on a 92 & 95 Dakota years ago, replaced the turn signal switch in the column & found a loose ground wire in the harness back by the tail lights. Never had a problem again. If you're gonna try to replace the switch you will need tamper proof torques bits just FYI. Good luck. Let us know how it turns out.

Nov 07, 2012 | 1995 Dodge Dakota

1 Answer

I have 2000 monte carlo ss v6 , it has multiple problems, all electrical :the turn signals buzz and wont flash as does the emergency flashers. the a c works periodically , the gas guage goes up and down...

Good grief! Short of replacing the wiring harness one thing comes to mind. Make sure the ground wire from the battery to the body is clean and well connected. What you claim really sounds like a major grounding problem.

Mar 16, 2011 | Chevrolet Monte Carlo Cars & Trucks

2 Answers

92 caprice classic turn signals not working, but the bulbs are fine. Hazards, brakes, etc all work fine. Any ideas?

Yes, the problem is the turn signal flasher is defective. You can has two flasher relays. One for the turn signals and one for the hazard lights. That is why the hazard lights flash and the turn signals do not. Replace the turn signal flasher relay located on the drivers side of the steering column, mounted behind the instrument cluster in the convenience center. They are both mounted in the same location so turn on the hazard lights and the one that you put your finger on that is not clicking is the turn signal relay.

Mar 08, 2011 | 1992 Chevrolet Caprice

1 Answer

Hello, my 1993 ranger's turn signals just quit working. the emergency flashers still work but the turn signals wont flash, make any noise, or register on the dash. all the fuses are good, but i don't know...

Do they just turn on solid? If that is the the case, it needs a flasher relay. It is located up under the dash on the drivers side. If you purchase one at an auto parts store, you should be able to find it pretty easy. If they don't turn on at all, I would make sure the turn signal switch is plugged in all the way, and or doesn't have any pulled or broken wires going to it. Could be the turn signal switch its self.

Aug 15, 2017 | Ford Ranger Cars & Trucks

1 Answer

Brake lights wont flash and turn signal wont flash

turn on the turn signals without turning on any other lights, first left, walk around the car, and see if there is a light that is not functioning, then right, and do the same. If there is a light that is not functioning, replace the bulb.
If all lights work, then its the unit flasher unit itself, and can be baught at a parts store, and is easy enough to replace in the fuse box of most cars.

Apr 14, 2009 | GMC Envoy Cars & Trucks

3 Answers

1997 dodge avenger turn signal probs and location

replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

1 Answer

Turn Signal problem

2003 mini cooper . Went for a clean up,and came back with the righ turn signal on all the time. every thing else works fine when you turn left or 4 way flashers. Any help will be appriciated. Thanks in advance

Jul 30, 2008 | 2002 Mini Cooper

Not finding what you are looking for?
1998 Suzuki Esteem Logo

Related Topics:

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides