At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
remove the plastic cover from the steering colum then you will see the switch on the left side remove the 2 screws you will need to turn the key to release the switch reverse to put together then you will need to relearn the switch to the body control module this is done by turning to crank and leaving it in the run position til the security light stops flashing you will need to do this three time after the third time remove the key for a min then start the car if possible but on a battery charger if the battery goes died during the relearn you will need to start over
There is no ignition timing to set on these later model cars. The spark is controlled by sensors and the engines computer which will pulse the injectors and ignition coils. What kind of problem are you having?
THE CHECK ENGINE LIGHT COMES ON BECAUSE THE CAR RUNS A SYSTEM CHECK AND SOMETHING IS FAILING. UNTIL YOU ADDRESS THE PROBLEM IT WILL KEEP COMING BACK ON( HINT) REPLACE THE GAS CAP IT IS THE MOST COMMON CAUSE
There is NO power steering fluid in a 06 Cobalt. It is electric! This is a flaw that GM is not willing to come to terms with. Try topix.com for the list of over 350 people that this has happened to. Also, the dealership wants YOU to pay for it. There should be a recall. VERY dangerous!
you must remove all the plastic face plates around the radio then remove the radio itself.be cautious as you could damage the clips that hold the plates in place.
thank you that realy helped me out 100%
×