Question about 1998 Chrysler Sebring

1 Answer

How to remove alternater - 1998 Chrysler Sebring

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

I'm not familiar with your specific make and model, but alternators typically are fairly similar. There are usually two bolts that hold the alternator to the engine, one on top and one on the bottom. One holds the alternator in place, and the other allows it to pivot, so you can adjust the belt tension. You need to loosen both bolts, pivot the alternator to remove the belt, then remove both bolts. The wires go into the back of the alternator, just remove them from the screws holding them in place.

Posted on Oct 24, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i change the alternator


depends totally on make and model of vehicle which you did not share with us .

Apr 05, 2015 | Cars & Trucks

1 Answer

How to remove the alternator from a 2001 Mazda tribute LVX 6 cyl 3.0 engine


right ok firstly jack the car up put on axel stands take off the drivers side wheel then remove the plastic wheel arch cover then by the drive shaft you will see a bult which is located at the back of the alternater then undo the tentioner bolt which will be at the front of the alternater then at the bottm front part of the alternater there is another bult un do that to disconect the wires they might be bolted or clipped on then justpull it out from the back hope this was helpful

Nov 03, 2012 | Cars & Trucks

1 Answer

What do i need to remove to get to the alternator


for changing alternater on my escape the best way was to remove passenger side tire and remove roter and pop off assembly that is in way and just swing it to side you need some extentions to reach pretty far up to bolts holding cv joints on bracket close to engine and once you got everything out of way unbolt alternater and wiggle it over and pop it out of hole you took cv joint out of it is a bit of a ****** but this might help you.remember to make sure your battery is good before you run your new alternater or you will kill it. i did and had to do all over again a week later . hpoe it helps

Nov 19, 2011 | 2003 Ford Escape

1 Answer

Where is alternator located on 1996 cadillac deville? how do you replace alternator on 1996 cadillac deville?


The alternator will be located in the front of the engine on the drivers side. To replace it you must loosen the idler pulley and remove the serpintine belt, once the belt is off you must unhook any wires goin to the alternater and then there are two bolts at the bottom of the alternater holding it in place. Remove those and the alternater is loose then it may take some jockying back and forth to get it out. Obviously at this point the new one can go in the same way the old one came out.

Apr 13, 2011 | 1996 Cadillac DeVille

1 Answer

2005 Maxima, brake and battery warning lights are on. Serpentine belt looks good and the brake fluid level is ok. What else could it be?


THE ALTERNATER IS DEFECTIVE.
CHANGE THE ALTERNATER.--REMOVE THE SERPENTINE BELT BY PUSHING THE TENSIONER PULLEY WITH A CROW BAR OR BIG SCREWDRIVER. BE CAREFULL TO NOTE THE ROUTING OF THE BELT FIRST, THEN REMOVE THE ALTERNATER BOLTS. INSTALLATION IS THE REVERSE OF THE REMOVAL.

Sep 07, 2010 | 2005 Nissan Maxima

1 Answer

2002 mercury cougar-4 cyl Alternater


you might not believe this but you have to remove the right axle to get the alternator out.

Valdi

Jun 08, 2010 | 2002 Mercury Cougar

1 Answer

Alternator is very hot and car is not running


There is a SHORT in the Alternater, This HEAT is Caused By RESISTANCE and Without the Engine even Running It Being HOT INDICATES An INTERNAL FAILURE. Remove the ALTERNATER Have it BENCH TESTED and Replace Alternater to Correct this Problem.I am Confident this is the problem.

May 09, 2010 | 1987 Chevrolet Monte Carlo

1 Answer

How do you take out an old alternator and install a new alternator in a 97 honda civic


From the top of the car remove the slide and anchor bolt from the alternater bracket. remove your 3 or 4 pin plug and diconnect the pos power line beside the 3 or 4 pin plug ( on the back of the alternater). now raise the car and from below remove the lower bolt that allows the alternater to swing back and forth. the bolt fits through the housing of the alternater. remove the belt. now the alternater is free. this lower bolt that was just removed attaches to a bracket bolted to the block. remove this bracket and the alternater will slide out of the bottom of the car. complete the above steps in reverse to install new part.

Nov 08, 2009 | 1997 Honda Civic

1 Answer

Alternater Fuse


First disconnect the battery.
Use a pair of long-nose pryers and regular screwdriver. Make sure anything adjacent to the fuse is removed first so it is not damaged.

Apr 01, 2009 | 1998 Toyota 4Runner

1 Answer

TRYING TO REMOVE THE ALTERNATER ON A 2000 DODGE GRAND CARAVAN


Nope. It just takes a really small hand and a little bit of luck.

Thanks for using fixya!

Sincerely,

JC

Jan 22, 2009 | 2000 Dodge Grand Caravan

Not finding what you are looking for?
1998 Chrysler Sebring Logo

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...