Question about 2002 Honda CR-V
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Power seat won't recline
are there any other leavers or dials around the seat that you can see that may operate the back rest independantly?
can you see the motors are they intact?
is there a button that selecets the particular funtion you wish to do?
it is functional, can you test that?
dirt is a major key in faulty switcches and can oftem be cleaned
Posted on May 05, 2009
under the seat is a thin wire that goes from one side to the other it has most likely broke you need to find the secondary lock it was connected to and release it to move the seat but you must also release the main lock so i suggest replacing the wire . THIS IS FOR MANUEL SEATS
now as for power seats you will have to locate the power lead wire and make sure it is not broke if so you can replace the connecter with an aftermarket one and it may work again
Posted on May 15, 2009
I had this problem not to long ago, it's a very easy fix! I agree with that garr651!
There is a a thin metal wire that runs from the left & right side under the seat. Each end of the wire loops around a small hole on each track bracket and is held in place by two small washers that fit inside a grove.
Check to see if the washers are in the groves and holing each end of the wire tightly. If they're not simply slide them back into place and make sure the wire tight.
The easiest way to do this is to look under the driver seat from the back seat. Also a pair of needle nose pliers may become handy (although not necessary).
Posted on Jun 17, 2009
possibly your power window regulator is out. basically check the fuses first to make sure you have not blown that, if it is good, then you can order a new window regulator from the dealer or online @ autopartswarehouse.com. to replace the window regulator you will need to will need to remove the door panel, start with the screws on the handle and the arm rest, covered with a plastic cap. the door panel which can be pryed from the bottom with a flat blade screw driver or flat pry bar, it will make a snapping sound. three bolts on the regulator 4 bolts on the window tracks and 2 bolts securing the window, re assemble as you have taken apart, Good Luck!!
Posted on Sep 10, 2009
Tips for a great answer:
Oct 10, 2016 | 2004 Honda Accord
Aug 21, 2015 | 1998 Cadillac DeVille
Feb 04, 2015 | 2001 Honda Accord
May 04, 2011 | 1991 Honda Accord
Jun 07, 2009 | 2007 Jeep Liberty Sport
Jun 04, 2009 | 2005 Honda Accord
May 26, 2009 | 1998 Honda Accord
Sep 02, 2016 | 2002 Honda CR-V
109 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: