Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: chime goes off
Open the drivers door and look at the hindge area and you will see a black rubber accordian tube between the door and the pillar.This is the protective cover for the wiring harness. Now take a screw driver and stick it into the latch that latches when u close the door and trip the latch. Now start up the vehicle and wiggle the black tube and see if you can duplicate the concern. If so then pull the cover back and inspect the wires for a broken wire. these models are bad for this happening.
Posted on Feb 03, 2009
will have to take the side panel off where the belt is located make sure no twists are present. if not pull it hard and see if it retracts, if it still does not retract you may have to replace the unit.
the retraction spring in the unit is broken, or the lock mechanism has failed.
Posted on Apr 30, 2009
Ive worked at a Toyota Dealer for the past 11 years and yes this is normal. Nothing to worry about. Everything is working properly
Posted on Dec 04, 2009
HI I may have found y the airbag light goes off and on on pt cruisers. there is a pair of wires that connect to the seat air bag pod, the wires run down the seat and to a connector in th floor. after long in vestigation i found that even thou the wires have a conduit protecting them the wires run under the foam pad and over a steel bar, which caused 1 wire to be cut inside yet there was no tell tale sign from out side the sleeve, it was only when I disconected the battery and then the connector from the airbag and the floor connector removed it and run a meter on the two I found it. when i "pulled" the leads the outer sleeve stretched exposing the fault, the wire had a very clean break in it which was odd but the fault. note that only one wire powers the air bag, the other is a feed to the PCM, hence they are connected at the ends hence not easy to trace and with saftey in mind you must not put meters on the wires while connected to any part of the airbag
Posted on Dec 05, 2009
Tips for a great answer:
Apr 04, 2014 | 2006 Pontiac G6
Oct 06, 2013 | 2004 Dodge Ram 1500
Aug 20, 2013 | Volkswagen Phaeton Cars & Trucks
May 18, 2013 | Cars & Trucks
Apr 07, 2013 | 2006 Cadillac STS
Mar 31, 2013 | Cars & Trucks
Aug 15, 2012 | Cars & Trucks
Sep 11, 2011 | 2004 Ford F150
Aug 05, 2009 | 1999 Jeep Grand Cherokee
Dec 07, 2008 | 2007 Chrysler PT Cruiser Touring Hatchback
19 people viewed this question
Usually answered in minutes!