How to recalibrate the compass, 2011 Ford explorer

All the fuses

Fuse Box Diagram Jeep Compass (MK49; 2011-2017)

https://fuse-box.info > jeep > jeep-compass-mk49-2011...

Fuse box diagram (location and assignment of electrical fuses) for Jeep Compass (MK49; 2011, 2012, 2013, 2014, 2015, 2016, 2017).

It usually means the compass on the vehicle needs recalibrating. That is the thing that tells you are going north or wherever in the mirror. The module is in the back of the mirror. Resetting is usually very easy.

Find an empty car park.
Press the Compass button on the mirror.
Do 3 complete circles left.
Do 3 complete circles right.

Google

year make model manual

They are all online. Press CTRL+F and type in Compass,.

Toddster from GMFORUM provides these instructions:


Compass calibration procedure GM Forum Buick Cadillac Chev Olds GMC...

WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION ...

www.fixya.com/cars/t16705785-compass_error_2009_ford_fusion

Feb 21, 2013 - WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION A MESSAGE COMES UP ON MY DASH SAYS COMPASS NO ... SOURCE: I HAVE A2009 FORD FUSION AND IT'S NOT GOING OVER 20 MPH ... Compass data error -- how do i determine my zone-- ... Jan 28, 2010 ' 2007 Ford Edge SEL Plus.

Compass - Ford Fusion Sport - Ford Fusion Forum

www.fordfusionforum.com/topic/9390-compass/

Jan 23, 2013 - Compass - posted in Ford Fusion Sport: 2011 Fusion SEL without navigation screen. Following windshield ... I have recalibrated and reset the compassaccording to the manual instructions (several times) but cannot correct the error. Can anyone help? ... picture of where it is: 2009-08-30_051718_2.gif.

Fuse no. 10 (7.5 amp) in the interior (dash) fuse panel.

If you have no power to the unit (no info showing, I would look at the fuses.)

The overhead console is quite prone to internal failure. Dim, intermittent, or dead displays are a common symptom of an internal failure. We offer a reasonable repair service with a lifetime guarantee. Check it out: www.autoclockrepair.com

http://www.motorcraftservice.com/pubs/content/~WOXEXP/~MUS~LEN/42/99expog1e.pdf


Check fuses page for lables of fuses......

just looked in my manual it say`s arizona is in zone 5

You need to recalibrate the compass. The procedure is in your owners manual. Here are the basic steps.

First, you will need to verify that your compass zone is set to your current geographic location. Since I do not know where you are located, I cannot tell you the code. They are listed in the manual. (For example, So Cal is zone 5.)

Second, here is the compass calibration adjustment procedure:

Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut.
1. Start the vehicle.
2. To enter the compass calibration mode, press and hold the button for greater than eight seconds. The display will then show CAL in the display window.
3. Drive the vehicle slowly (less than 3 mph) in circles until CAL indicator turns off. As many as 5 complete circles may be required.
4. The compass is now calibrated.