Question about Cars & Trucks

1 Answer

96 corsica wont start when hot replace crank sensor and still does it 2.2 any help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 20,706 Answers

Nice guess. hot soak failures.
you failed
you failed to check spark, if spark is good, then it not that.
4 spark plugs tested,(ever tune it up?) and use a timing
light to see if it hits everytime and on the mark,
yes, timing lights work on cranking motors,
they do not prove spark intensity only test spark plug does that.
when hot? what's hot?

does that mean out door too hot or engine coolant.?
we have 85f temps now. air temp.. but you?
so... no location stated. make any help at all hard.
hot engine no starts.
1: engine gets hot and looses compression
2: lost spark. (yes, the Cam sensor can fail hot block. yes)
3: lost fueling, or floods,?
the tests are simple and do them in order to save huge wastes of time and guessing and huge wasted cash on useless parts.

you could just watch scotty. it gets this right. (skip ad)
http://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

Posted on Oct 13, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 Dodge Runs fine but after warms up it dies,cools n will crank n run good then dies again after warming up.


Hey Dennis,, DON"T BECOME A PARTS REPLACER..(some people who "call themselves mechanic's" are just that!),.. .take this Dodge to a qualified professional... talk to them..
You say warm... do you mean full running temp?? .if so, you may be experiencing a vapor lock,, fuel "boils" when the engine is hot.. when it cools its no longer hot enough to cause this..(S.W.A.G.)

Jun 19, 2017 | Cars & Trucks

1 Answer

I have a '92 Corsica 3.1 V6 Have had a start problem. No Spark. Cranks fine, & have replaced the starter, coils & module. Does this car also have crank & cam sensors on it? It is...


probably has a crank sensor on the back side of the motor toward the tranny, if not bolted on the tranny bellhousing. if that thing goes bad, it wont fire. it should have 2 wires going to it and usually one bolt holding it in.

Nov 07, 2010 | 1992 Chevrolet Corsica

1 Answer

96 corsica has spark and gas wont start


Bad sensor most likely. Crankshaft position sensor and car wont run at all or maybe for a second. Also depends if anything weird happened before it was turned off that would reveal more. Usually a bad sensor will cause stalls before a no start. Bad injectors can cause but you would have a stall out also. If pump and spark your computer is working, and ASD relay and pump. I'd lean toward a sensor and crankshaft sensor would cause that but a pain to replace depending where it located.

Sep 02, 2010 | 1996 Chevrolet Corsica

3 Answers

Im not getting any spark in my 96 Corsica


Ignition module may be bad. It should be located under the coils, the coils usually plug into the ignition module. Also might be a bad crank or cam sensor

Sep 11, 2009 | 1996 Chevrolet Corsica

1 Answer

I have a 2003 stratus and it wont start... Crank sensor???


In a HOT day,old battery and fuel pump will be the prime troublemaker.

You need to charge up the battery and check for 12.4-13.6V range.

How old is the battery?

Most are warrenty for 24,48 or 96 months.

====
Fuel pump motor portion will ran forever. But the plastic diaphragm will give out in a hot day.

Do a fuel injector pressure test. Below 40 pis is trouble.

Fuel filter should be change if the fuel pump is at fault.


ALL more gas until it's over 1/2 tank and re-test.

A weak fuel pump will take more effort to pull fuel from a near empty tank.

Good luck,

Jul 15, 2009 | 2003 Dodge Stratus

1 Answer

Location of crank position sensor on 92 chevy corsica 3.1


You will have a no start or stalls after engine gets hot and then cools down restarts, the sensor is on the front of the engine mounted into the cam gear cover if it is not visiable get under the, (here is a picture) car and look.d37e0b9.jpg

Jan 21, 2009 | 1988 Chevrolet Corsica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...