Question about 1997 Dodge Dakota
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Heater problem
you may have a vacum leak under the hood or dash. you may find this usually isnt that hard to fix. also look under the dash and try to find the blend door. move it to heat with your hand and see if you have heat then. good luck .
Posted on Nov 09, 2008
This vehicle has what is known as a flasher unit, it is a relay assembly under the dash. This is the relay that clicks when your signals are on. it may need to be replaced. Another possible trouble spot could be the wiring in the steering column. Are there any other issues with horn, cruise etc.
Check the flasher first and get back to me.
Posted on Dec 06, 2008
It has been a long time since I've replaced one of those. From what I remember you don't have to go through pulling the heater box out. You do need to remove the glove box assembly. Look up under the passenger side of the dash. If you see the bulge of the motor/cover hanging straight down then remove the cover and the motor will be there. If you don't see that then te motor is mounted horizonally. If that is the case then the fresh air door assembly will need to be removed and it is behind that.
Here is a quick check to see if the motor is bad. Thump the bottom of the heater box by the passenger's feet. if the motor comes alive or makes noise then it is bad. Also check the fuse and make sure that it doesn't work on any speed. (the resistor would prevent operation on only one speed or more but generally not all speeds)
Posted on Apr 05, 2009
There is some wire shorted to ground during the dash work due to some pinched points. Need to revisit the re-installation work.
Posted on Dec 13, 2009
Tips for a great answer:
Dec 08, 2016 | 1997 Dodge Dakota
Dec 03, 2011 | 1999 Dodge Durango
Aug 17, 2011 | Dodge Dakota Cars & Trucks
Jul 13, 2010 | 1997 Dodge Dakota
Jan 23, 2010 | 1997 Dodge Dakota
Jul 27, 2009 | 1997 Dodge Dakota
Jun 26, 2009 | 1997 Dodge Dakota
Feb 20, 2009 | 1997 Dodge Dakota
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: