Question about 2002 Cadillac Escalade Ext

Open Question

How to remove rear hub assembly off Cadillac catera

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: 1999 cadillac catera oil in my water system

Red oil, radiator trans cooler has failed....Brown oil, iether intake or head gasket has failed...do not drive car...have it towed to a shop .

Posted on Apr 27, 2009

Ad
r_mcalhoun
  • 166 Answers

SOURCE: 1998 Cadillac Catera, assembling motor, & cylinder head

please buy a book on this one,there are hard

Posted on May 09, 2009

  • 4 Answers

SOURCE: Have a 2000 Cadillac Catera

First, you want to remove the 4 screws on the door panel. Next you have to remove the door grip. To do this, you have to get a small screwdriver with a long shaft. Insert it into the top of the grip and it will force a clip that holds the grip to the handle. Remove the screw found there. Next is the tricky part. You have to find something very small but capable of prying with. Pull door lock up, pry out the orange clip - it may take some doing so don't give up. After you have removed clip, remove screw found there. Finally pull cover from around door handle and remove final screw.

Posted on Jun 07, 2009

  • 113 Answers

SOURCE: 2001 cadillac catera ebtcm removal how to

You need to remove the upper rad hose and the battery.
Then, use a torx to remove the 6 screws (hard to get at) which will remove the EBTCM from the brake modulator. You also must disconnect the two electrical connectors (the big one has a slide tab).
There are places you can send the module to and rebuild with warranty. I took a module from a 99' and installed it in my wife's 01'. Now the speedo, odometer, cruise and power steering work perfect and no TCM / ABS light.

Posted on Aug 18, 2009

trububbles1
  • 54 Answers

SOURCE: 1998 cadillac catera lost all keys what i

go to the dealer and give them the vin number they should be able to get u a key

Posted on Oct 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 catera thermostat


thermostat you have to remove fuel rail and lower intake.also you have to remove timing cover and camshaft sprockets.you have to remove rear timing cover the thermostat housing between both cylinder blocks.you looking at 2 hour job.

Jan 12, 2013 | 2001 Cadillac Catera

2 Answers

How do i remove the tires on my 99 catera after the lugs are removed. do they pop off or is there another process?


Cadillacs have a center wheel lock underneath the cover on the center of the wheel.

Open up the compartment in the trunk where the jack and tire tool are, and there should
be a special tool that removes the center wheel lock.

At least thats how it is on my Cadillac.

Sep 10, 2011 | 1999 Cadillac Catera

1 Answer

I am trying to find out what do i need to do to reach the bolts at the top of the transmission on my 1998 cadillac catera


YOU HAVE TO REMOVE INTAKE AIR RESONATOR TO THROTTLE BODY ASSEMBLY AND EXHAUST MANIFOLD IF NECESSARY. TO GET TO TOP TRANSMISSION BOLTS.

May 30, 2011 | 1998 Cadillac Catera

1 Answer

How to replace rear wheel bearing on 2003 hyandia sonata


Hub & Bearing Removal & Installation To Remove:
Hub bearing assembly (Typical) hyundai-08-00-6029.gif

  1. Release parking brake.
  2. Remove rear wheel assembly.
  3. Remove rear wheel speed sensor from carrier.
  4. Dismount brake caliper and support with mechanic's wire.
  5. Remove brake disc.
  6. Remove 4 axle hub mounting bolts. Special tool 09432-11000 (Typical) hyundai-08-00-6021.gif

  7. Using tool 09432-11000 (or suitable gear puller), remove tone wheel.
  8. Remove carrier.
  9. Remove stakes and remove flange nut.
  10. Support bearing outer race flange and press rear axle hub out.
  11. Using tool 09432-11000 (or suitable puller), remove inner race from axle hub.
To Install:
Hub bearing assembly (Typical) hyundai-08-00-6029.gif

  1. Apply thin coat of grease to bearing contact surface and hub.
  2. Using and appropriate tool, press bearing into hub. CAUTION
    Do not press against outer race of wheel bearing.
  3. Install flange nut and stake nut until it meets concave portion of spindle.
  4. Install carrier.
  5. Use an appropriate tool to press tone wheel.
  6. Install hub/bearing assembly with rounded portion of outer race facing up.
  7. Install 4 hub/bearing assembly bolts and rotate hub to seat bearing.
  8. Measure wheel bearing starting torque with a spring balance or equivalent device.
    • Starting torque should measure 15.9 in lb (1.8 Nm) or less
  9. Install brake disc.
  10. Mount brake caliper.
  11. Install rear wheel speed sensor to carrier.
  12. Install rear wheel assembly.
prev.gif next.gif

Oct 28, 2010 | 2001 Hyundai Sonata

1 Answer

Do you have to take the fuel tank off to change the fuel pump in a cadillac catera 2000?


SORRY TO SAY YES BUT YOU HAVE TO REMOVE FUEL TANK TO REMOVE FUEL PUMP ASSEMBLY.

Jul 26, 2010 | 2000 Cadillac Catera

2 Answers

How to replace rear wheel bearings


don't have topaz. maybe escort will help guide you.

Section 04-02: Suspension and Wheel Hubs, Rear 1996 Escort, Tracer Workshop Manual
REMOVAL AND INSTALLATION Wheel Bearing and Hub Assembly NOTE: Wheel bearings are not serviceable and should therefore be replaced as an assembly with the wheel hub (1104).

Removal
  1. Raise and support the vehicle.
  1. Remove the wheel and tire assembly.
  1. Remove the hub grease cap (1131) from the wheel hub.
  1. If equipped with disc brakes, remove the rear disc brake caliper (2552) and rear disc brake rotor (2C026). Refer to Section 06-04 for the removal procedure.
  1. If equipped with drum brakes, remove the two brake drum screws and the brake drum (1126).
  1. Unstake the rear axle wheel hub retainer (4B477) securing the wheel hub to the rear wheel spindle (4A013). Remove and discard the rear axle wheel hub retainer.
  2. Remove the wheel hub from the rear wheel spindle.

Feb 06, 2010 | 1990 Mercury Topaz

3 Answers

2001 cadillac catera ebtcm removal how to


You need to remove the upper rad hose and the battery.
Then, use a torx to remove the 6 screws (hard to get at) which will remove the EBTCM from the brake modulator. You also must disconnect the two electrical connectors (the big one has a slide tab).
There are places you can send the module to and rebuild with warranty. I took a module from a 99' and installed it in my wife's 01'. Now the speedo, odometer, cruise and power steering work perfect and no TCM / ABS light.

Aug 08, 2009 | 2001 Cadillac Catera

1 Answer

How do you take out the little window in the rear dooe in a 98 cadillac catera?


hi take the door panel off then find the screws to remove the rear window door frame with window. good luck

Mar 20, 2009 | 1998 Cadillac Catera

4 Answers

Have a 2000 Cadillac Catera and the passanger rear window goes down but it is not coming up. Trying to find how to remove door panel and repair it. Any suggestions


There is a screw behind the ashtray of the door, and also another
in the armrest of the door.....underneath little cap. Once removed, the motor assembly can be removed by drilling the rivits out. The
replacement can be installed by using M5-0,8mm x 12mm bolts
and nuts (part # 44192 at Advanced Auto Parts. Motor assembly
for window was purchased at Salvage Yard for $40.

Jul 22, 2008 | 2000 Cadillac Catera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...