Question about Cars & Trucks
Sure, and some cars 3,
1 in enging bay
2 in cab
the wiriing in total is here, no guessing.....
alldata dot com (change dot for .)
Posted on Oct 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Lincoln ls overheating
There is a hose on the side of the coolant resevoir that has a straight blade screwdriver fitting in it. Open the fitting and this will bleed the heads on the LS. Without opening this you will never get the air out of the head, trust me.
Posted on Nov 11, 2008
- If temp guage reads normal, the lack of heat may be due to the Heater Control Valve. Located in front of the radiator. Lower passenger side. A real bugger to replace.
- The plastic cap just over the thermostat is key in re-filling the anti freeze and bleeding air.
Posted on Dec 25, 2008
SOURCE: lincoln ls transimission fluid
It is located on the transmission pan. Their is a "fluid level check screw" that you will need to take out. You aren't going to be able to just dump a quart of fluid in and be good though. These transmissions are designed under normal driving conditions to never have to be serviced and that includes the fluid. But if your like me, you like to hot rod it once in a while. Then you should change your fluid every 45,000 miles or so. The drain plug is at the very bottom of the pan. You are gonna need a little over 11.5 quarts of Mercon(R) V Transmission fluid for the 3.0 as well as the 3.9 liter. The amount of fluid needed for the transmission is the same regardless of the engine you have.
Hope this post will help someone in the future. Also their is no dipstick to check the fluid level. You have to take the screw/bolt out on the side of the Tranny Pan.
Posted on Apr 04, 2009
SOURCE: diagram for a 2000 lincoln ls V8
Your best ,to cut the old belt,to remove.
You can use a long handle 1/2" drive ratchet, on the belt tensioner.
The only pic is in the shop manual.
Wear long sleeves and arm protector sleeves on top. the fan housing is sharp and a tight fit. You will be there a couple hours.
Draw a picture before you start, and you won't need a diagram
Posted on May 17, 2010
You have fuses and relays-
Under the hood.pass side,front,next to washer bottle and ABS motor
On the right side kick panel,under glove box. Have to remove cover
In trunk,lift cover,left of battery.
Posted on May 23, 2010
Tips for a great answer:
Sep 14, 2016 | 2003 Lincoln LS
Apr 28, 2014 | 2000 Lincoln LS
Oct 13, 2013 | 2000 Lincoln LS
May 16, 2011 | 2000 Lincoln LS
Feb 22, 2011 | 2000 Lincoln LS
May 12, 2010 | 2000 Lincoln LS
May 05, 2010 | 2002 Lincoln LS
May 17, 2009 | 2000 Lincoln LS
Apr 22, 2009 | 2002 Lincoln LS
Nov 10, 2008 | 2000 Lincoln LS
Sep 23, 2017 | Cars & Trucks
36 people viewed this question
Usually answered in minutes!