Question about 1995 Mercury Grand Marquis

1 Answer

Had driver door replaced , Non locking Switch won't work, Mirror switch wont work, Inside lights won't come on when door is open, radio wont work, clock won't work. The machine said nothing they did would affect these things. But I think different. Any ideas!

Posted by on

  • jpatton98 Apr 24, 2009

    Thank you checked connection, Noticed they have cut the wives that go to the Keyless inter. and didn't reconnect them. Could this be cursing all the problems.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 139 Answers

Open inside door panel and check elec. connection
to make sure . if that don,t do it check your fuses

Posted on Apr 24, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mazda 6 2005 driver door jammed


if you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Jan 04, 2013 | 2004 Mazda 6 Sport

1 Answer

When I turn off the ignition, shut the door, and lock my car the radio and main console lights won't go off for about 5 minutes. This is a new problem and everything I've tried won't get the...


is it a cavalier or sunfire in the door there is a dome light switch this allows you to listen to the radio or put thwindow up or down for 30 to 60 seconds sometimes the door switch shorts out on the drivers side you can test by taking the pass door switch and change for drivers door if not a short to body modual

Sep 14, 2011 | Chevrolet Equinox Cars & Trucks

3 Answers

2006 buick lucerne back doors won't open


My friend just had this problem and he reached in and pulled the inside door handle back as far as it would go, and then let it go, allowing it to 'snap' back. For some reason this fixed it. We have no idea why. By doing this on one door, both rear door locks freed up and the rear locks are now working. Before, both rear locks were stuck and you could not open the doors from the inside nor the outside. Not sure why it works, but maybe it will work for you!

Jun 10, 2011 | 2006 Buick Lucerne

2 Answers

F 150 DOOR AJAR WILL NOT GO OFF AND INTERIOR LIGHT STAYS ON! HOW DO I FIX IT


If only the door ajar light and interior light is not working it is probably the door ajar switch located on the door latch inside the door. sometimes a little WD40 sprayed towards lower side of the latch will work, frees the piston in the switch. if not the switch must be replaced. If also the outside mirror control does not work, the door lock switch also does not work, it is a bad ground to those three systems, the Electric windows have a separate ground wire and still work. You must feed a new black wire from a good ground on the body thru the door accordion tube and connect it to the larger black wire on the plug that goes to the door lock switch. The door lock, the mirror control, the door ajar light, and the interior light problem will be gone.

Jan 20, 2011 | Ford F-150 Cars & Trucks

1 Answer

How to remove the inside door panel from a dodge 2005 2500 pick up


FRONT DOOR TRIM PANEL - REMOVAL
Release door latch and open door.
Roll window down.
Remove window crank Window Crank - Typical , if equipped.
Remove screws attaching trim panel to door Door Trim Panel and Trim Panel Screw
CAUTION: Do not forcibly pull trim panel from door, damage to trim panel may occur.

Simultaneously lift upward and outward to release retainer steps from inner door panel Trim Panel Retainer
Disengage inside handle linkage rod from inside handle.
Disconnect speaker harness wire connector Speaker And Power Mirror Connector
Disengage power mirror wire connector, if equipped (driver's side only) Speaker And Power Mirror Connector
Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped Power Door Lock/Window Connector
Separate door trim panel from vehicle.
INSTALLATION
Position trim panel at door.
Engage wire connector for window/lock switch panel, if equipped. Engage clips attaching power window/lock switch panel to door trim panel.
Engage power mirror wire connector, if equipped.
Connect speaker harness wire connector.
Engage inside handle linkage rod to inside handle.
Align trim panel retainer steps with inner door panel and slide trim panel into place.
Install screws attaching trim panel to door.
Install window crank, if equipped.

Hope helped with this; remember rated this help. Good luck.

Nov 12, 2009 | 2005 Dodge Ram 2500 Truck

1 Answer

Volvo V70 Driver Door switches do not work


the main ground for the switch assembly is open somewhere.

Sep 04, 2009 | 2002 Volvo V70

1 Answer

1999 Econoline E150 Van mirror replacement


Remove the door handle bezel.Remove the power window/door lock switch bezel.Remove the rearview mirror fastener trim cover.Remove the 4 door trim panel retaining screws.One that was behind the mirror trim cover,behind the switch panel,behind the door handle bezel,and one at the bottom corner.Lift the door trim panel up from the door to disengage the trim panel clips.Remove the front radio speaker. Disconnect the power mirror wiring connector.Remove the 3 bolts to the mirror.

Feb 08, 2009 | Ford E-150 Cars & Trucks

3 Answers

2003 Explorer door ajar light stay on when all doors are closed


I had this problem on my 2003 explorer and took WD40 and gave the lock mechanism a good dose where it meets the clasp on the door jam. Then open and close the doors a couple of times to get them working. They get gummed up and sometimes have a tendency to stick.

Dec 29, 2008 | 2003 Ford Explorer

2 Answers

Volvo s40 rear doors wont open inside or outside


There is a child safety switch on the rear latch assembly that prevents opening from the inside handle. This switch may be on. Check your owners manual for more info.

Bret
RepairPal.com

Nov 30, 2008 | 2004 Volvo S40

Not finding what you are looking for?
1995 Mercury Grand Marquis Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

fordexpert

Level 3 Expert

5481 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...