Question about 1990 Jeep Wrangler

1 Answer

1990 jeep wrangler 4cyl 5sp manual transmission--no curise no tilt and not air At night driving with headlights on the headlights will flash off and on by themselves.They will stay app for 30 sec and will flash off app. 30-60 seconds and come back on. They do this on both high and low beam Dimmer switch has been replaced---Do not know what to do next ---------

Posted by on

  • gwalling Apr 24, 2009

    Could you please tell me where the circut breaker is located, I could not find it

    Thanks for replying to the first qestion

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

Under the dashboard to the right of the stereo is the headlight relay. It may be in need of replacement. Also in the fusebox has a circuit breaker rated for 7.5amps could be heating up and creating the flicker of lights. My first guess would be the circuit breaker. Your welcome

Posted on Apr 24, 2009

  • Mark L. Roberts Jr.
    Mark L. Roberts Jr. Apr 27, 2009

    It is lacated under the dashboard on the driver's side. It looks like a large silver fuse but you can't see the inside of it. Good luck

  • Mark L. Roberts Jr.
    Mark L. Roberts Jr. Apr 27, 2009

    In the fuse panel.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i know if i need a valve job on my 1990 4cyl jeep wrangler YJ


  1. compression test. 2 pressure test using a fitting in plug hole with air compressor attachment welded to it. check that the valves that you are checking on each cylinder are in the fully closed position listen for air escaping into the exhaust manifold then do the same for the inlet side hope this is of some help

May 30, 2014 | 1991 Jeep Wrangler

1 Answer

I just posted back up light problem. my jeep is 1994 wrangler s with 2.5 manual transmission


i answered it finally, in 1 of your 3 posts.
with FSM pages, and step by step tests.
the circuit is very very simple.
battery >>> fuse> 5sp-rev-switch>>>lamps>>> ground.
a voltmeter finds this is 5min work.

Mar 06, 2014 | 1994 Jeep Wrangler

1 Answer

1990 jeep pops and you've gotta put it in neutral, stop, then back in gear, if you give it too much gas go REALLY easy and it got me home... transmission/transfer case/rear axle ???


Does it do this in any specific gear or all of them ? If it is just 5th gear it is a somewhat common problem that I have seen. The transmission should be rebuilt or replaced.

Dec 05, 2011 | 1990 Jeep Wrangler

1 Answer

1990 jeep wrangler turn signals do not flash adequately when headlights are on..?


Is this an optical issusion and the indicators are merely being "flooded " by the wash of light from the headlights. Try a stronger bulb in the indicators or use amber bulbs if not already fitted.

Jan 16, 2011 | 1990 Jeep Wrangler

1 Answer

My Jeep headlights flash on and off every once in


Check the daytime running light relay under the fuse panel under the hood

Jun 02, 2010 | 1995 Jeep Wrangler

1 Answer

1990 Wrangler: I have a 1990 yj with the 4.2, my question for eve...


Most 90 wranglers from 89 to 95 have an ax15 5 speed transmission in them. The 4 cylinders had an ax5 transmission.

May 17, 2010 | 1990 Jeep Wrangler

1 Answer

I have a 90 jeep wrangler, 4cyl and 5 speed transmission, when i accelerate in any of the gears, it makes a popping noise and the second it makes that noise it seems like the jeep stops pulling, if you...


It sounds like it is the throw out bearing. From your description of the vehicle not pulling its weight, it is going to need a clutch. The throw out bearing will come in most clutch kits, so when you replace the clutch you can replace the throw out bearing, pressure plate, and pilot bushing.

Oct 18, 2009 | 1990 Jeep Wrangler

1 Answer

1990 Jeep Wrangler Islander L6 4.2L


9 Degrees clearpixel.gif Application: With automatic transmission
With Federal emission
16 Degrees clearpixel.gif Application: With automatic transmission
With high altitude emission


9 Degrees clearpixel.gif Application: With manual transmission
With Federal emission
9 Degrees clearpixel.gif Application: With manual transmission
With Federal emission

clearpixel.gif

Jan 29, 2009 | 1990 Jeep Wrangler

1 Answer

1990 Jeep Wrangler Problem:


1990 Jeep Wrangler. Driving with lights on for 10 - 15 minutes. First the dash lights go out followed by the headlight and tail lights. If you pull the dimmer switch back (like you would to flash your brights at someone) the head lights will come on and as long as you continue to pull back on the dimmer switch the head lights will stay on bright.

Sep 30, 2008 | 1990 Jeep Wrangler

Not finding what you are looking for?
1990 Jeep Wrangler Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...