Question about 1998 Toyota Camry
Worn tie rod ends is suspect.
Posted on Dec 24, 2013
Axle is supposed to do that. need to jack up wheel not take it off. and put hands at 12 and 6 pm and wiggle wheel if there is a lot of movement then the bearing is gone. if ok let down. take wheel off and jack back up. on the suspension there is an arm coming off it. thin bar. fixes to another bar. this is a drop link arm. not these work with the anti-roll bar that is on the front. pull on it if it moves out and in it needs changing and that is your problem. also change other side as when one goes it is best to change both side. easy job to do. on the anti-roll bar at the front there is some rubbers that hold it in place check them and if the look split or cracked would change them to wile you doing the drop links. you just unbolt them. pull the rubber out of the case and swap the rubbers and bolt back on with some locking seal.
Posted on Oct 13, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Car wobbles
yes make sure your lug nuts are all tight and the wheels are seated properly on the hubs, if they are tight bring the car to a tire shop and have them balance the two front tires, this will tell you if you have a bent wheel please rate -jeff
Posted on Sep 05, 2008
That sounds like a left front wheel bearing gone bad My friend.. turning right transfers weight to the left side and it probably has a roar similar to a turbo fan jet.. Try it and lemmie know.. thank you
Posted on Mar 11, 2009
sounds to me like its a cv joint. if the rubber boot gets damaged in any way, dirt gets in there and really does some damage. check the boot really good. if you dont see any holes or anything it might just be the wheel bearing. id take it to a mechanic and ask him to just look at it. usually they wont charge ya.
Posted on Apr 19, 2009
Wheel bearings is my guess. Confirm this by jacking the vehicle up with wheels on and check for play. Grab the tire by the top and bottom and wiggle it in and out, the will be excessive play. Given the fact that you gave a clear explination i am almost certain its bearings. You will need to purchace new bearings(Inner and Outer), Hub Seals, and possibly a possibly an axle seal kit for the 4x4 drive axle (they get old and stick to the axle durring disassembly) and keep in mind that to get the outter races of both bearings in the hub need to be "Pressed" out a a machine shop, or by any shop that might have a press.
Posted on Oct 07, 2009
Tips for a great answer:
Oct 10, 2015 | 2006 Toyota Sienna
May 31, 2011 | Toyota Corolla Cars & Trucks
Mar 03, 2011 | 2000 Chrysler Grand Voyager
Jan 24, 2011 | 1995 Honda Accord
Feb 21, 2010 | 1997 Honda CR-V
Feb 18, 2010 | 1994 Mercury Tracer
Sep 10, 2009 | 1987 GMC VanDura
Jan 14, 2009 | 1996 Nissan Maxima
Sep 05, 2008 | 1988 Toyota Corolla 4 Door
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: