Question about 2007 Maserati Quattroporte

Open Question

Epb stuck on - 2007 Maserati Quattroporte

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric hand brake ?


You need to say what model/year etc.

Aug 14, 2016 | Ford Cars & Trucks

1 Answer

Captiva problems


even after you release it? what vehicle

Jun 02, 2014 | Cars & Trucks

1 Answer

Epb not working at all


in the swicth is were u should look

Jan 27, 2014 | Land Rover LR3 Cars & Trucks

1 Answer

How do you set up electric hand brake after fitting rear pads?(appears to be binding on).on s type jaguar.


Bulletin from Jaguar :

Electronic Park Brake (EPB)
Re-Calibration Procedure
2003 MY-ON
S-TYPE
M44998-ON

Issue:
On some 2003 MY-on S-TYPE vehicles, a customer may report a concern of premature
parking brake pad wear or the brakes binding. This condition can result if the electronic
park brake (EPB) system is not re-calibrated after the removal of the rear brake callipers
to replace the brake pads.
Action:
Should a customer express concern regarding the above, refer to the calibration
procedure detailed in this bulletin.

1. Reset the EB module:
a. Switch off the ignition.
b. Disconnect the battery for 30 seconds. For additional information, refer to STYPE
Workshop Manual Section 414-01.
c. Reconnect the battery.
2. Start the engine.
3. Firmly apply and release the foot brake five times.
4. Confirm that the message NOT CALIBRATED" or APPLY FOOT AND PARK
BRAKE" is displayed on the instrument cluster message center. This indicates that
the parking brake is in calibration mode.
5. Lightly press the foot brake pedal.
6. Apply the parking brake by using the EB switch.
7. Release the parking brake.
8. Release the foot brake.
9. Confirm that the brake warning lamp is no longer illuminated on the instrument
pack and that the NOT CALIBRATED" message is no longer displayed in the
message center.
10. Apply and release the EPB five times to ensure no error is present.
_____________________________________________________________________________

NB: It is also possible the actuator is bad though.

Jan 17, 2011 | Jaguar S-Type Cars & Trucks

1 Answer

Limited epb function message


Have a EPB limited on my ford c max 16 tdci 2005 how can I switch it of please is there away

Mar 19, 2010 | 2005 Ford Focus

1 Answer

Reseting epb alarm


open ignition disconnect battery and reconnect negative first and then positive, shut ignition wait 5 seconds and open ignition wait 5 seconds (do this steps 3 times) and remove key and after 15 seconds insert key and repeat same step once but instead of 5 seconds wait 15 second and start the car that should reset the OMU and the EPB.

Oct 01, 2009 | 2009 Maserati GranTurismo

1 Answer

07 vw passat epb and brake light on


Adjust your brake light switch. On brake pedal bracket there should be a switch with a plunger on it. Push your brake pedal and hold, then pull out the plunger on switch, then release brake pedal. That adjusts the switch. Or the switch may just be faulty.

Feb 24, 2009 | 2007 Volkswagen Passat Sedan

Not finding what you are looking for?
2007 Maserati Quattroporte Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maserati Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Maserati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...