Question about 1980 Triumph TR8

Open Question

Need drive belt routing for 1980 TR8 with air

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

Passat 1998,4cylinders, turbo, what is the belt routing diagram, the power steeling belt is related with the water pump or not, thank you


The ancillary belts routing diagram for a 1998 VW Passat 1.8 Turbo

tdisline_822.jpg
AC = Air Conditioning
CS = Crankshaft
F = Fan pulley
G = Generator
PAS = Power Assisted Steering
T = Tensioner pulley
WP = Water Pump

1. Viscous coupling removal (lock the viscous coupling).

tdisline_823.jpg

2. Lock the ancillary drive belt tensioner.

tdisline_825.jpg

3. Lock the coolant pump.

tdisline_826.jpg
4. Remove the coolant pump drive belt.
5. Remove the ancillary drive belt.
6. Release the A/C tensioner if vehicle is equipped with A/C (Air Conditioning).
7. Remove the A/C compressor drive belt.

Aug 09, 2011 | 2004 Volkswagen Passat

2 Answers

Need belt routing diagram gmc 2500 6.6 duramax


I need a belt routing diagram for an o 06 Duramax with air ps etc

Jun 29, 2011 | 2006 GMC Sierra 2500HD 2WD

1 Answer

Compressor locked up on my chevy 350 need belt routing diagram without air conditioning


depends on the vehicle the motor is in. Check top of vehicle under the hood, should be a diagram of the belt(s) needing and the proper routing.
OR

Here is a whole forum showing you and explaining to you how to do it

http://www.hotrodders.com/forum/chevy-305-drive-belt-diagram-routing-148446.html

May 08, 2011 | Chevrolet 3500 Cars & Trucks

1 Answer

95 chevy blazer V-6 vortec serpentine belt diagram


35968c9.gif

Drive belt routing-1994-95 4.3L, 5.0L and 5.7L engines, C/K series (without A.I.R.)




ce473c9.gif

Drive belt routing-1994-95 4.3L, 5.0L and 5.7L engines, C/K series (with A.I.R.)

Sep 24, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

I need a diagram for a installing a serpintine belt in a 2005 toyota tacoma


Depends on engine. Copied below diagrams from AutoZone.com:

Drive Belt Routings




0996b43f80209580.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.4L engine



0996b43f80209581.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.7L (3RZ-FE/M) engine



0996b43f8020209e.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.7L (2TR-FE) engine



0996b43f80209582.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-3.4L engine

Aug 26, 2010 | 2005 Toyota Tacoma

1 Answer

Need diagram for serpentine belt


2004 SUZUKI FORENZA - L4 2.0L 2000cc GAS FI N

Adjustment

The belt is automatically adjusted by the auto tensioner.


Drive Belt Routings

47cc840.jpg

Fig. Accessory drive belt routing-2.0L engine



Removal & Installation
  1. Remove the air filter housing assembly bolts and the air intake tube.
  2. Remove the air filter housing assembly from the vehicle.
  3. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
  4. Remove the serpentine accessory drive belt.
To install:
  1. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
  2. With the wrench in place on the tensioner bolt, loop the serpentine accessory drive belt loosely over the pulleys.
  3. Slip the belt over the tensioner.
  4. Remove the wrench from the tensioner bolt and the belt will tighten itself.
  5. Install the air filter housing assembly into the vehicle.
  6. Install the air intake tube and the air filter housing assembly bolts.
  7. Tighten the air filter housing assembly bolts to 53 inch lbs. and nm
I really hope helped with this. remember rated this help. Good luck.


Nov 12, 2009 | 2004 Suzuki Forenza

1 Answer

Need a diagram on how to refit fan belt


Like a lot of people...you didn't post your engine size....so out of these 11 photos, please choose the correct one for your application:

64390c8.gif
Accessory drive belt routing—1.8L (AEB/ATW/AWM) engines

2014f34.gif
Accessory drive belt routing—1.8L (AWP/AWV/AWW) engines 2.0L (AEG/AVH/AZG/BDC) engines without A/C

9f61356.gif
Accessory drive belt routing—1.9L diesel (ALH) engines without A/C

2d14e76.gif
Accessory drive belt routing—1.9L diesel (ALH) engines with A/C

1889681.gif
Accessory drive belt routing—1.8L (AWP/AWV/AWW) engines 2.0L (AEG/AVH/AZG/BDC) engines with A/C

0e253fc.gif
Accessory drive belt routing—2.0L (ABA) engine without A/C

51400be.gif
Accessory drive belt routing—2.0L (ABA) engine with A/C

a1c082c.gif
Accessory drive belt routing—2.5L (BGP) engine with A/C

fdf3ca9.gif
Accessory drive belt routing—2.8L (AFP/BDF) engines

a5de70e.gif
Accessory drive belt routing—2.8L (ATQ) engines

cad2791.gif
Accessory drive belt routing—4.0L (BDP) engine

Oct 31, 2009 | 2003 Volkswagen Passat

1 Answer

How do I change the timing belt on a 2003 Tiburon


2003 Hyundai Tiburon 2.7L MFI DOHC 6cyl

Inspection
Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.
Removal & Installation
  1. Raise and support the vehicle.
  2. Remove the engine splash shield.
  3. Rotate the drive belt tensioner clockwise to release the drive belt tension.
  4. Remove the drive belt from the alternator.
  5. Slowly release the drive belt tensioner.
  6. Remove the drive belt from the accessory drive pulleys.
To install:
  1. Install the drive belt to the accessory drive pulley.
  2. Rotate the drive belt tensioner clockwise.
  3. Install the drive belt to the alternator.
  4. Ensure the drive belt is properly aligned and seated into the grooves of the accessory drive pulleys.
  5. Slowly release the drive belt tensioner
  6. Install the engine splash shield.
  7. Lower the vehicle.
b3e0cbe.jpg

Fig. Accessory drive belt routing-3.0L and 3.5L engine


4a6b54d.jpg

Fig. Accessory drive belt routing-2.5L and 2.7L engines


3b0d2d5.jpg

Fig. Accessory drive belt routing-2.4L engines


6470b70.jpg

Fig. Accessory drive belt routing-2.0L engines


6d43bf5.jpg

Fig. Accessory drive belt routing-1.5L engine


508cf9b.jpg

Fig. Accessory drive belt routing-3.0L engine


99b1d12.jpg

Fig. Accessory drive belt routing-2.5L engines


97529b0.jpg

Fig. Accessory drive belt routing-2.4L engines


5cd1383.jpg

Fig. Accessory drive belt routing-1.8L and 2.0L engines


3e72758.jpg

Fig. Accessory drive belt routing-1.5L engine


2aafa70.jpg

Fig. Accessory drive belt routing-2.4L engines


aa6cd2c.jpg

Fig. Accessory drive belt routing-2.0L engines


4081274.jpg

Fig. Accessory drive belt routing-1.5L engine


I hope help you with this (remember rated this help) Good luck.

Sep 15, 2009 | Hyundai Tiburon Cars & Trucks

2 Answers

How does the serpentine belt go on for 1995 grand cherokee..."inline 6


Diagrams WRITE BACK i need to know the Picture shows for you does on my end Fig. 32 Serpentine Drive Belt Routing. 4.0L/6-243 W/air Conditioning & Power Steering 42236453PLEASE RATE ME Diagrams Notes Fig. 30 Serpentine Drive Belt Routing. 4.0L/6-243 Less Air Conditioning 42236452

Jan 16, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1980 Triumph TR8 Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...