Question about Mercedes-Benz Cars & Trucks

Open Question

Many quarts transmission fluid need for e430 - Mercedes-Benz Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: transmission fluid capacity

Manual 6 quarts
Automatic depends on why it's being added. If bone dry try 8 quarts and check. Always check warm in no gear, if you can't be carefullllll not to over fill. Atf +4 is what dodge automatic. take

Posted on Dec 30, 2008

StormStrikes
  • 104 Answers

SOURCE: Transmission fluid capacity for 2000 Kia Sephia?

The four speed automatic shows a total fill (that is all the fluid it can hold) is 5.7 Quarts. So if you just dropped the pan and relplaced the filter, you shouldnt need more than 4 quarts and likely you would have a little extra with that.

Posted on Dec 30, 2008

ewashmidas
  • 362 Answers

SOURCE: 1999 Chevy Malibu how many quarts of transmission fluid does it

12.9 Quarts of DEXRON®-VI Automatic Transmission Fluid

Posted on Feb 02, 2009

dealt_soul
  • 296 Answers

SOURCE: 2005 toyota corolla s transmission fluid

The cleaning is by flushing. DO NOT LET THEM FLUSH YOUR TRANNY! It will do nothing but damage the tranny.


For as fluid. the 3.2 quarts is if you dont drain the torque converter. If you drain the converter then it will take about 14 to 16 quarts.


The reason i say do not let them flush the tranny is because they force the fluid backwards through the system and that will damage it. Also if the tranny is almost on its last "leg" and you may not know it. Then all that will do is speed the process up.

Posted on Mar 17, 2009

c17hydro
  • 2984 Answers

SOURCE: Transmission fluids

If you have the 4 speed 4L30-E..........9.2 quarts (automatic)

And, if you have a manual:

Manual Transmission, W/ BW 5-SPD..........4.4 pints
Manual Transmission, W/O BW 5-SPD..........6.3 pints

Type of fluid is dextron or mercon III, you have to pump it in from the bottom.

Please don't forget to rate!!!!

Posted on Mar 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many quarts of transmission fluid does it take when you have a transmission flush done to a chevy lumina


the transmission pan typically holds 4-6 quarts depending on the transmission. the fluid capacity of the transmission is 8-12 quarts roughly.

A typical flush will consist of 12-14 quarts of fluid.

Aug 26, 2015 | Cars & Trucks

1 Answer

How many quarts of transmission fluid does a 99 Chevy Cavalier 2.0 4 cylinder transmission require?


Automatic Transmission Fluid Capacities Automatic Transmission 3-Speed Pan Removal and Replacement 4.0 quarts After Complete Overhaul 6.9 quarts When draining or replacing torque converter, more fluid may be needed. Manual Transmission Fluid Capacities Manual Transmission 4-Speed Automatic Transmission Not Owner Serviceable Complete Drain and Refill 2.0 quarts

Jun 07, 2014 | Cars & Trucks

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

How much transmission fluid does it take when changing the transmisssion screen and filter?


When the pan is dropped and fluid is drained, to refill, it usually needs 5 - 6 quarts. When refilling, check the transmission fluid dipstick as you are adding the last two quarts. And also run the transmission thru the gears.

Oct 20, 2012 | 2003 GMC Envoy

2 Answers

Need to know how much transmission fluid to add if empty


Automatic Transmission, E4OD Initial Fill..........6.5 quarts
Automatic Transmission, C6 Initial Fill..........6 quarts
Automatic Transmission, 4R70W Initial Fill..........5 quarts
Automatic Transmission, 4R75W Initial Fill..........5 quarts
Automatic Transmission, Total Fill
4 speed E4OD..........15.7 quarts
4 speed 4R70W..........14 quarts
3 speed C6..........12.1 quarts
4 speed 4R75W..........14 quarts

E 150 5.0L engine

Feb 22, 2011 | 1996 Ford Econoline

2 Answers

How much tranamission fluid does my 1997 sable hold


If you have your owners manual, there is a section containing the capacities for all fluids. You may also simply check your fluid level, with a running motor and warm transmission. If the stick indicates add, start with a 1/4 quart and work your way up. Unless there is a problem with the trans, there is no real reason to ever add fluid unless your are flushing the transmission.

Feb 02, 2011 | 1997 Mercury Sable

1 Answer

What kind of transmission fluid does it take


Specifications Notes Use only Mercedes-Benz approved fluids

TYPE AF(DEXRON-II (R) Automatic Transmission Fluid) CAPACITY, Initial Refill*: 1982-85 190E 5.5 Liters 5.8 Quarts 1982-92 All w/V8 engines 7.7 Liters 8.1 Quarts 1986-91 190E, 260E, 300E 2.6L 6.0 Liters 6.3 Quarts 1986-91 300 Series 2.6L, except SL 6.2 Liters 6.6 Quarts 1990-91 300SL 6.0 Liters 6.3 Quarts 1992 600SEL 7.7 Liters 8.1 Quarts * Add specified quantity. With engine at operating temperature, shift transmission through all gears. Check fluid level in PARK, and add fluid as needed
diesel TYPE AF(DEXRON-II (R) Automatic Transmission Fluid) CAPACITY, Initial Refill*: 1984-89 190D Diesel 5.5 Liters 5.8 Quarts 1984-85 300 Series w/turbo 6.2 Liters 6.6 Quarts 1986-87 300 Series Diesel 6.2 Liters 6.5 Quarts 1990-93 300D Diesel 5.5 Liters 5.8 Quarts 1990-91 350SD, 350SDL Diesel 6.2 Liters 6.6 Quarts 1992-93 300SD Diesel 6.2 Liters 6.6 Quarts * With engine at operating temperature, shift transmission through all gears. Check fluid level in PARK, and add fluid as needed

Sep 17, 2009 | 1989 Mercedes-Benz 190

1 Answer

Fluid Capacity for Transmission


Hello paige farrar: Depending on the transmission the fluid and capacity is as follows. Automatic to drain and refill using Dexron type 3 fluid. Is 2.46 us quarts of oil. On a overhaul the amount is 7.3 us quarts. If you have a standard transmission the fluid to use is GL 4 gear oil. Should hold 2.64 us quarts of oil. Thank You for using FixYa. If you need further assistance please just ask. Roger

Apr 11, 2009 | 2000 Chevrolet Tracker

1 Answer

Changing radiator


Does the car have a transmission dipstick? Look on the passenger side of the engine compartment towards the firewall to find the dipstick tube. If it has a dipstick there will be a square top on it with a locking mechanism. Run car to normal operating temerature, unlock the dipstick pull it out wipe it off push it back in and pull it back out then look to see if the fluid is between the marks. If not just add fluid through the tube.  If you don't have a dipstick there will be a smaller cap with  red plastic lock on it. You will have to break the red lock to get the cap off. There is a special tool from Mercedes to check the level on these non dipstick units. If you think it is low then add 1 quart and road test for proper operation and shifting. 

Nov 21, 2008 | 1994 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...