Question about Cars & Trucks
Makes noise when folding like a whine. Mercedes say it sounds like it needs lubricating!! How do you do a lubrication on a wing mirror??
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You'll need a screw driver (philips is most common), a plastic prying lever, socket (should be 10mm, but can't remember)
If you're lucky, on the inside of the door, will be a triangular panel right behind the mirror that you can pop off. If you're not as lucky and it's one piece or the panel is blocked by the door panel, you'll need to remove the door panel to change it.
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can remove the bolts holding the mirror onto the door
Posted on Oct 23, 2009
If you have electric folding mirrors fold them in, if not fold the mirror back against the spring (not easy as it is quite strong). Looking from the front, to the mirror cover side of the spindle on which the mirror pivots if you pull it forward, you will see the end of the main mirror body which has a groove it it. At the end of the groove there is a springclip which can prised up using a flat bladed screwdriver. It is easiest to place the blade under the clip and twist the clip to release it. Once fully released the cover can then be withdrawn. Refitting is the reverse of the above but if the cover does not automatically clip in place you may have to force it back with the screwdriver.
Posted on Nov 10, 2009
It's been a while, you go through the glass.. the big glass.. grab it lightly
slide it up adn then over left.. the bottom glass.. slide it left and the up and right at the same time.. its a little touchy so be patient.. now i cant remember but i think you have to removed the motor.. then you can access the bulb behind it.. best of luck!!
Posted on Feb 03, 2010
Tips for a great answer:
Mar 06, 2012 | Mercedes-Benz Cars & Trucks
May 05, 2011 | 2001 Mercedes-Benz E-Class
Mar 15, 2011 | Mercedes-Benz C-Class Cars & Trucks
Mar 08, 2011 | 2001 Mercedes-Benz C-Class
Apr 13, 2010 | 2004 Mercedes-Benz C-Class
Nov 13, 2009 | 1999 Mercedes-Benz S-Class
Oct 20, 2009 | 2003 Mercedes-Benz C-Class
Apr 11, 2009 | 1991 Mercedes-Benz 190
Mar 26, 2009 | 1999 Mercedes-Benz Mercedes Benz Sl Class
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: