Question about 2003 Dodge Intrepid

1 Answer

3 05 bolt patter on 96 intrepid for water pump

Im needing to know if the internal water pump on a 96 intrepid is a 5 bolt or a 3 bolt pattern

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

Really depends on the engine you have.

If you have a 3.3 L engine then the water pump is a 5 bolt pattern

If you have a 3.5 L engine then the water pump is a 3 bolt pattern.

Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I measure the bolt pattern for a 2005 dodge ram 1500


To measure the bolt pattern of any Rim for any vehicle
You measure from the center of the Stud across diaganally
to another stud and if that measure ment is 5 1/2 inches or
4 1/2 inches whatever the tape measure says then your bolt
Pattern is the number of Studs by the measurement which means for example 5 X 5.5 that's your bolt patter and if they ask for
hub that's the round center hole of the rim You measure from inside across to inside edges so if it's 4 inches that's your hub. good luck.

Feb 26, 2015 | 2005 Dodge Ram 1500

1 Answer

How to replace water pump 99 2.7


Hope this helps you....

Instructions
  1. Prepare the Dodge Intrepid
    • 1 Lay out a drop cloth underneath the Dodge Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
    • 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
    • 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
    • 4 Use a grease pencil to mark on the timing belt its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
    • 5 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
    • 6 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
    • 7 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
    • 8 Clean off the mounting area with a shop rag.
    Install the New Pump
    • 9 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
    • 10 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
    • 11 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
    • 12 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
    • 13 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Read more: How to Install a Water Pump in a Dodge Intrepid ' eHow.com http://www.ehow.com/how_4508707_install-water-pump-dodge-intrepid.html#ixzz29Q1ZC1uZ

Oct 15, 2012 | 1999 Dodge Intrepid

1 Answer

1996 Intrepid 3.3L. Loose power then it dies at times


The first thing that must be done here is to have the computer tested for fault codes with a scanner.

Jun 01, 2012 | 1996 Dodge Intrepid

2 Answers

How do i fix a water pump in a 96 dodge caravan


You'll need to remove the serpintine belt, once removed you'll need to take the pulley from the water pump, I believe three bolts, 10MM. After this is removed you'll be able to see the bolts holding the pump in place. I believe there are 5 or 6 of them, if my memory serves they are 8MM.

Please let me know if this had assisted you,

Thanks,
Tom

Apr 20, 2010 | 1996 Dodge Caravan

1 Answer

HOW TO CHANGE WATERPUMP 1999 INTREPID 2.7


    Prepare the Dodge Intrepid
  1. Step 1 Lay out a drop cloth underneath the Dodge2_bing.gif Intrepid to protect the floor from coolant spills. Designate an area to lay out each part alongside its bolts and connecting hoses and wires. Use a drop cloth here as well, some of the parts will have traces of grease and coolant.
  2. Step 2 Disconnect the negative battery cable, using a screwdriver to unscrew the clamp that secures the cable to the negative (-) post. Pull the cable away from the battery post.
  3. Step 3 Use a jack to elevate the Dodge Intrepid and jack stands to shore up the jack. Release the pressure in the radiator by removing the cap. Take out the drain plug located underneath the radiator. Catch the coolant in a resealable container
  4. Step 4 Use a grease pencil to mark on the timing belt2_bing.gif its position in each pulley before removal. This will save time when reinstalling. If needed, replace the timing belt and skip marking the old one.
    Remove the Damaged Pump
  5. Step 1 Locate the water pump on the Dodge Intrepid. It's mounted on the front of the engine block and connected to the radiator and various other parts through a series of hoses. It's rotated by the timing belt. Study these parts, as you'll have to remove them.
  6. Step 2 Disconnect or remove the parts in front of the water pump, using an adjustable wrench. In the most common Dodge Intrepid engine--the 2.7L--you'll find, in order: the upper radiator crossmember, fan module, accessory drive belts, crankshaft damper, timing cover, timing chain and guide wires.
  7. Step 3 Unbolt the water pump from the engine block, using an adjustable wrench. You may have to use a chisel to gently break the seal between the mount and the pump. Discard both the pump and the bolts.
  8. Step 4 Clean off the mounting area with a shop rag.
    Install the New Pump
  9. Step 1 Inspect the new water pump to ensure it's identical to the old pump and free of any metal splinters or debris.
  10. Step 2 Arrange the new water pump on the mount. You won't need sealant for the o-ring on a Dodge Intrepid. Hold the water pump and o-ring in place as you secure it with the new bolts. Tighten them with a torque wrench to 105 inch pounds torque in any order.
  11. Step 3 Install the timing belt and wires, using the grease pencil marks to guide you in installation. Install the rest of the parts in the order removed. The camshaft must be reconnected with a torque wrench at 125 foot pounds torque.
  12. Step 4 Replace the radiator's drain plug and refill the radiator with the amount and type of coolant specified in your owner's manual. Release the jack and jack stands.
  13. Step 5 Attach the negative battery cable to the post and tighten the screw on the clamp. Crank the Dodge Intrepid's engine and check for leaks. Then, close the hood.

Apr 04, 2010 | 1999 Dodge Intrepid

1 Answer

Ford Focus 05 Zetec Stud Pattern


probably x 108,they usually keep that the same,,go to tirerack,com im sure they know for sure or call them

Oct 09, 2009 | 2005 Ford Focus

1 Answer

96 intrepid and not getting fire?


hope to be some help, it sounds like the car aint geting any gas,my advice is too check the gas line & fuel pump...let me knw how it go...

Jul 13, 2009 | 1997 Dodge Intrepid

1 Answer

Im trying to figure wat is the lug pattern


The factory Lug pattern on the Olds Custom cruiser full size (i.e. Caprice/ Impala) is 5 lug with 5 inch spacing also known as 5 on 5. The S-10, Camaro, and Chevelles are all 5 on 4 3/4 so they will not work. Any 5 lug Full sized Van or full sized GM pickup truck or Astro have the same pattern as the Custom cruiser. Additionally, Most Gm 64-96 Full sized body on frame cars have the same pattern of 5 on 5 (5x5) as the Custom cruiser. Hope this helps.

Oct 31, 2008 | 1992 Oldsmobile Custom Cruiser

1 Answer

I got coolant pouring from the most bottom of my crankshaft on a 96 dodge intrepid. The secondary belt that pulls the water pump and air is gone. I'd like to know what caused this and how much the repair...


If you have a 2.7 engine, your water pump is in need of replacement bad. It's located behind the timing cover and is turned by the timing chain. When the water pump goes out, coolant pours out in the inside of the timing belt and into the oil pan leaving the same water in the oil look as if you had a blown headgasket.

Jul 10, 2008 | 1996 Dodge Intrepid

Not finding what you are looking for?
2003 Dodge Intrepid Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...