Question about 1999 Plymouth Grand Voyager
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Next to the battery & mount onto the upper frame at the front of the car an air filter housing with 2 self tapping bolts. Remove these and disconnect serveral hoses and lift back, Below this is the air filter housing itself. clips are on the side slip off, and replace filter.
Posted on Jun 23, 2008
The likely problem is the contacts in the solenoid on the side of the starter. Does the solenoid click when trying to start the car? Disconnect one battery cable before doing anything with it. I fixed mine by removing the end of the solenoid case and building up the badly eroded input terminal bolt head with silver solder--worked great. You have to work under the car to get to these parts--use jack stands for safety.
Posted on Jul 16, 2009
Before the step-by-step instructions I want to make sure this is the Alternator that needs to be replaced and not something else. This will save you money for an Alternator you don't need and save you time for replacing a good alternator.
Start the vehicle. With the engine running - disconnect the Negative Cable from the Battery. If the Engine dies - it is the Alternator. If it doesn't die - it is not the Alternator. I have had plenty of people who have replaced perfectly good Alternators only to find out it was something else.
1. Disconnect the Negative Cable from the Battery.
2. Using a 15mm closed end wrench/bar - Rotate the Belt Tensioner towards the front of the vehicle and remove the Surpentine Belt off the Alternator. You do not have to take it completely off the vehicle.
3. Remove the bolt holding the top of the Alternator Mounting Bracket to the Engine Air Intake.
4. Remove the bolts (plural) holding the outside of the Alternator Mounting Bracket to the Alternator Mounting Plate.
5. Remove the bolt holding the top of the Alternator to Alternator Mounting Bracket.
6. Remove the Alternator Mounting Plate.
7. Remove the the Altenator Mouting Bracket.
8. Rotate the Alternator towards the rear.
9. Discoonect the electrical connections (plural), including the nut holding the wire on.
10. Remove the lower Pivot bolt located at the bottom of the alternator.
11. Remove the alternator.
12. Installation is reverse of above.
Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 12, 2010
1999 Plymouth Truck Grand
Voyager 2WD 3.8L MFI 6cyl
* The Vehicle Speed Sensor is located Mounted on transmission
* The Sensor - Transmission Speed is located Mounted on transmission
Hope this help (remember comment and rated this).
Posted on Apr 20, 2010
Tips for a great answer:
Nov 02, 2014 | 1999 Plymouth Grand Voyager
Jun 25, 2012 | 1999 Plymouth Grand Voyager
Nov 09, 2010 | 1999 Plymouth Grand Voyager
Jun 26, 2010 | 1999 Plymouth Grand Voyager
May 24, 2010 | 1999 Plymouth Grand Voyager
May 22, 2009 | 2000 Plymouth Grand Voyager
25 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: