Question about 2004 Jaguar X-Type

1 Answer

Need to replace the left front wheel bearing on my wife's car

Help!!! The dealer wants $550. to do the job. (I warned her about this wend she bought this car) 2004 Jaguar X-type. Does anybody know of the correct procedure to do this thing?

Posted by on

  • yadayada
    yadayada May 11, 2010

    sounds about right

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

Too bad I am not at work I could call on a price for a bearing. To be honest that is not too bad of a price on a bearing installed. Most Jag parts need to be purchased from Jag. A typical price for a sealed hub bearing unit is about $140 retail for a chevy corsica(just did 2 on one on monday) to about $300-400 on a ford super duty. and that is not including labor. You need air tools, a torque wrench and lock tight thread locker for this job. And something to remove any corrosion from mounting surfaces
1. jack up car,take wheel off.
2. remove brake caliper
3.remove rotor
4.remove whats holding bearing on. Either one big nut on outside or three to four bolts that hold it to the knukle.
this is how most cars are now,if its rear wheel drive its a peice of cake ,fwd is a little more difficult.

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Humming noise coming from vehicle over 30mph


At 100,000 miles, you are driving on bad wheel bearings. They are not too bad to replace, it is a wheel bearing assembly. Bolts on . You will need to remove the spindle nuts, the brakes and rotors, and unplug your abs cable from under the hood. It should take about 1 hour per side if you haven't done it before, and the bearings should be around $120.00 each.

Sep 14, 2014 | 2003 Oldsmobile Bravada

1 Answer

I need dealer book time on a left front wheel bearing on a 05 dodge neon


Only planning on paying book time & no more !

Good Luck there

Pay to have the job done properly & a torque
wrench used on axle nut ,not an air gun all shops use.

Do the job yourself
There is lots of video on how to do it

Mar 05, 2014 | 2005 Dodge Neon

1 Answer

Wheel bearing left front


you need a professional to do this job-who has alot of tools and a big hammer- Denny

Dec 22, 2013 | 1999 Hyundai Accent

1 Answer

I am currently deployed to afghan, and my wife took our envoy in to get new tires and new shocks put in, but there was still a noise coming from the front, the mechanic said it was the bearings, what...


He's probably talking about the wheel bearings located in the front hubs. They can wear out over time and cause a humming sound as well as vibration. Any brake shop will look at the truck for a free brake inspection. If they determine it's just a wheel bearing, it shouldn't be a big ticket job.

Jun 15, 2011 | 2003 GMC Envoy

1 Answer

My ABS brake light is on and the right front tire feels like its jumping.


i can help you with this, i have a 06 chevy equinox, that has this problem, i hope that you still have a warrenty, and not an extended one, abs light came on brake feels like it is grinding on the pedal, this is caused by the wheel bearings, i took mine in and the dealer put it on there computer, it said that my front left wheel bearing was bad, dealer replaced it, it still does it.
if you do still have a warrenty, have the dealer change all wheel bearings.

Mar 29, 2011 | Chevrolet TrailBlazer Cars & Trucks

2 Answers

Replace front left wheel berring on 2002 GMC Yukon


do not replace only the bearing. replace hub assembly. remove rim/tire , remove caliper, mounting plate, rotor. . un bolt hub assembly, unplug abs. remove front axle nut if 4x4. you may need to rent the axle nut remove kit and hub puller. pull out hub. drive axle reward out of hub. install new part. do not torque hub over 90lbs. check with parts sell for spec

Jan 03, 2010 | 2002 GMC Yukon XL

2 Answers

Grinding or humming noise from X3


raise the car on that side grab the tire and see if has any( play) moves from side to side considerably.

Oct 03, 2009 | 2004 BMW 3 Series

1 Answer

Coilapse of left front wheel suspension, 2006 Jeep Compass


Photograph everything and find exactly what came apart. Likely the brake hose was torn out when it came apart so that's secondary damage. When replacing a bearing hub, it's necessary to remove brake assembly and are working in the area where you have the problem but without seeing exacacly what happened, I can't think of anything further to tell you. Get an outside opinion on the cause from someone who can actually look it over.
Glad that did not happen while going down the road!!

Jul 19, 2009 | 2006 Jeep Compass

1 Answer

How do I replace the front wheel bearings on a Mazda 626 1998


The front bearings on a mazda 626 are sealed and you must remove the entire hub assembly to have a shop or dealer install the bearings. The hardest part is you need to remove the center axel nut and it is very tight and is called a stake nut. If you do not have a fairly good amout of skill at repairs, this is one job that is safest left to the pros. Just one missed step can create more damage than you could beleive.

May 20, 2009 | 1998 Mazda 626

1 Answer

Keeps chewing wheel bearings


I'm not familiar with the style of this rear bearing, there are 3 basic designs that are generally used. The single most important thing to consider when installing any of them is preload torque. Obviously the bearing must be properly lubricated and protected with new seals when installed, but the whole job comes down to how tight that big gland nut is when you finish the job. Because the Festiva is really a Mazda, I would cross check the final installation torque of that nut between different spec sheets and see if some answers can be found there.

Mar 12, 2009 | 1991 Ford Festiva

Not finding what you are looking for?
2004 Jaguar X-Type Logo

1,384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...