Question about 2002 Isuzu Axiom
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: isuzu axiom pull camper
As I recall, your Axiom has a Tow Rating of 5000 pounds -- but check your Owner's Manual to be sure. I have several friends who tow with their Isuzus (using 1st and 2nd Gen model Troopers and Rodeos) and pull pop-up campers, high-profile campers, ATV trailers, etc... There's even even one guy who pulls his Trail Rig (another Isusu) to various off-road events on an 18-foot tandem axle steel frame trailer -- All of them do so without any problem whatsoever. The thing is, all of them use a Load Distributing Hitch System, such as this: http://www.truckaddons.com/Catalog/subpages/hidden-hitch-weight-distributing-hitch-systems.htm It makes a HUGE difference. Hope this helps.
Posted on May 18, 2008
Assuming your 1995 Isuzu Trooper is using the 3.2 SOHC engine, the firing sequence would be as shown here.
. This was originally posted here. An actual image which was originally posted here.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Jun 16, 2008
check engine light indicates that the computer in your vehicle has sensed a electrical problem pretaining to the performance of the engine usualy a diagnostic scan would determine the actual cause, vehicle has to be hooked up to a diagnostic tools.
Posted on Nov 24, 2008
I have found that one can mark (Paint pen) the gears and teeth (One tooth and one corresponding belt rib) on each gear prior to removing the belt. You can then overlay the old belt on a new belt and mark the same spots on the new belt and then install the belt so your marks on the gears and belt line up as they did before you removed the old belt. Given that your timing was right to start with....if done correctly, this will work.
Posted on May 09, 2009
I just had a garage replace my thermostat on my 2002 Isuzu Axiom. The book calls for 2 hrs labor, no way. iI took the garage more like 5 hrs plus, they ate the additional 3 hrs of labor. Note, the intake manifold must be removed and even then special tools are needed because it is still buried deep down. The garage took pictures ot this one because of how ridiculours Isuzu designed the location.
Posted on Aug 20, 2009
Tips for a great answer:
Mar 06, 2016 | Isuzu Cars & Trucks
Mar 20, 2014 | 2004 Isuzu Axiom
Jul 27, 2012 | 2002 Isuzu Axiom
Oct 25, 2011 | 2002 Isuzu Axiom
Jun 30, 2010 | 2004 Isuzu Axiom
Nov 24, 2008 | 2004 Isuzu Axiom
Aug 02, 2008 | 2004 Isuzu Axiom
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: