Question about Cars & Trucks

Open Question

2006 GMC canyon P0651 error code - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 811 Answers

SOURCE: 2006 Gmc canyon, acts like not getting fuel on

run scanner for trouble codes, some auto parts store will do this for free, check all fuses

Posted on Oct 04, 2009

ftw1952
  • 10319 Answers

SOURCE: how do I replace a 2006 gmc canyon brake light

yes you can.... it is a plunger style switch located near the brake pedal inside the car

Posted on Feb 28, 2010

  • 10865 Answers

SOURCE: how to fix the Tailgate Handle on a 2006 gmc

Hello. This is not difficult. Order the part or buy it at a GMC dealership. It will come with instructions.

Posted on Mar 02, 2010

melvi_99
  • 387 Answers

SOURCE: What is the most likely problem for codes POO14

this is set from camshaft and crankshaft sensor, always check engine oil for the right vescocity and change oil if necessary to avoid this dtc set

Posted on Jul 20, 2010

SOURCE: How do I do an oil change for 2006 GMC Canyon?

Lift your GMC Canyon using a jack and set the truck on jack stands. If you don't have jack stands then use a set of wheel ramps. Make sure you brace the front tires so the truck doesn't roll. (safety first) Pop the hood and take off the oil filler cap and remove the dipstick. Gather an oil drip pan, cleaning cloths, new oil filter, and adjustable crescent wrench and then slide under the truck. Locate the oil drain plug and filter. Loosen and then remove the oil plug and pull it out quickly. Let the used oil drain for 10 to 15 minutes into the drip pan. Take off the filter using an oil filter wrench. Check the gasket and threads for damage and dump the extra oil into the drip pan. Clean off any excess oil and replace with new oil filter. Put the oil drain plug back in (tighten it) and slide out from underneath your truck. Add new oil (approx 5 quarts) inside the oil filler hole and replace the dipstick and then tighten the oil cap. Lower your truck and start the engine for a minute so that oil pressure builds up. After you are done with the oil change, turn the ignition key to "run" and then hit the gas pedal three times to reset the oil change light.

Posted on Oct 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I remove my starter off a 2006 gmc canyon


2006 gmc canyon

For better result of your problem contact the reliable-store they have the best service manuals :))

Dec 15, 2015 | GMC Cars & Trucks

1 Answer

Locked radio 2006 gmc canyon


Most modern cars have a security code enable for the installed radio/cd players. This is an anti-theft device.

The initial documents given to the owner when the vehicle was purchased lists this code and how to reset it.

If you are second owner/original owner who has lost this information, then, you can approach gmc canyon dealer and they will have this code on their server. Normally a free service (I believe).

The security code is lost from the radio whenever keep alive voltage is removed from the radio. i.e. You disconnected or replace the battery.

I hope this helps.

Jul 23, 2014 | 2006 GMC Canyon

1 Answer

My GMC canyon truck 2006 is running very rough. I did a diagnostic test at the part store, and the codes P0300, P0017, P0068, came up. The dash control panel says reduced power.


Code 300 is for a random miss, code 17 is for a problem with the timing between the cam and crank sensors, and code 68 is a problem between where the throttle position sensor is and the amount of air coming into the throttle body.
You may need to research the trouble codes to get the testing procedures. You may also need a scanner to do the tests.

Sep 15, 2012 | 2006 GMC Canyon

1 Answer

What is the most likely problem for codes POO14 and POO17 on a 2006 GMC Canyon with a 3.5 engine?


this is set from camshaft and crankshaft sensor, always check engine oil for the right vescocity and change oil if necessary to avoid this dtc set

Jul 20, 2010 | 2006 GMC Canyon

1 Answer

My 2006 GMC, Canyon, 2seat engine lignt is on and will go off


I don't know about solenoid, what need's to be done, is go to any auto parts or some one like autozone where they can pull code's for free, then get back with us here at FixYa with the code number so we can help you with your trouble code, if a repair shop told you this, then have them give you the code number.

Jul 05, 2010 | 2006 GMC Canyon

1 Answer

How to fix the Tailgate Handle on a 2006 gmc canyon truck


Hello. This is not difficult. Order the part or buy it at a GMC dealership. It will come with instructions.

Mar 02, 2010 | 2006 GMC Canyon

2 Answers

GMC Canyon, computer shot.. cost?


You can to the Salvage Yard for a new computer, but your going to have to get it reprogram to your ignition keys, so the Passlock will start the engine. Before you go through all of that. recheck every thing, it could be your crank sensor or your ICM faulty causing your engine to shut down. Keep me posted and let me know what DTC codes you have. Note: a faulty fuel pump or dirty fuel filter will not set a DTC code. You may have a dirty fuel filter or faulty fuel pump or faulty fuel pump wire harness or fuel pump relay.

Jan 24, 2010 | 2006 GMC Canyon

1 Answer

Engine light came on


Take it to the nearest Autozone auto parts store and borrow there free OBD II scanner. Plug it in underneath the drivers side steering wheel and the scanner will retrieve the error codes. Look in the Haynes repair guide to see what the error code means

Dec 24, 2009 | 2006 GMC Canyon

2 Answers

2006 Gmc canyon, acts like not getting fuel on starting up ,can hear fuelpump running,changed relays around and truck cranks.


run scanner for trouble codes, some auto parts store will do this for free, check all fuses

Oct 04, 2009 | 2006 GMC Canyon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...