Question about 1999 Ford Explorer

1 Answer

Pass. side trailer turn and brake lights out 1999 ford explorer

I'm towing a trailer with a 1999 ford explorer limited v8 AWD. All lights turn signals and brake lights on the SUV work fine. Passenger side turn and brake light on the trailer doesn't work, although driver side works fine. Verified trailer bulbs/wiring good with another vehicle. Multimeter shows that there is no power to the green trailer wire lead that is supposed to power passenger side when brake/signal applied. Where's the fuse/relay that I need to check next? Is there a different fuse/relay for left and right side?

Posted by on

  • Anonymous Mar 19, 2014

    no tail lights and turn signal on drivers side ..all work fine on passenger side

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

If your vehicle lights are working all the fuses will be good. follow the cable from the towing socket on your vehicle , it will most likely go behind one of the rear lights to connect into your cars system,
check your tester where the cables join and you should find the problem. hope this helps.

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals & hazard lights no longer work. what # relay is for the turn signal?


hazard is #21 - 15A .........cant answer the blinker, i do know that i hear my blinkers click up at the top of my dash inst panel.
and my manual only gives #3 as a left stop/turn trailer tow connector, and #7 as the right stop/turn trailer tow connector. But maybe the clicking is a relay or maybe its built -in the panel, I'm gonna find this out cause now i need to know. thanks for bringing this up, this is the first of reading this problem with the explorer to me.

Jan 11, 2011 | 1999 Ford Explorer

1 Answer

Instructions for wiring a moving trailer connector


accessconnect_logo.jpg


Trailer Wiring Diagrams 4 Way Systems

4 way flat molded connectors allow basic hookup for three lighting functions; right turn signal / stop light (green), left turn signal / stop light (yellow), taillight / license / side marker (brown) and a ground (white).

4%20way%20wiring.jpg 4way_vehicle.jpg 4 way tow vehicle side.
4way_trailer.jpg 4 way trailer side.
5 Way Systems

Same as 4 way system listed above but adds a extra blue wire for brake signal or auxiliary power. Used on pop up camper trailers or utility / boat trailers.
5way_vehicle.jpg 5 way tow vehicle side.
5way_trailer.jpg 5 way trailer side.
6 Way System, Rectangle Plug 3/4 inch by 1 inch 6 way rectangle connectors right turn signal (green), left turn signal (yellow), taillight (brown), ground (white). The red and blue wire can be used for brake control or auxiliary. Use on a small motorcycle trailer, snowmobile trailer or utility trailer. Can also be used as custom wiring on trailers with 3 light/wire systems. See "Tow Vehicle Taillight Wiring" below.
6way_rectangle_1.jpg 6 way tow vehicle side.
6way_rectangle_2.jpg 6 way trailer side.
6 Way Systems, Round Plug

Round 1 1/4" diameter metal connector allows 1 or 2 additional wiring and lighting functions such as back up lights, auxiliary 12v power or electric brakes. Note: The black (sometimes red) 12v and blue electric brakes wire may need to be reversed to suit the trailer. Check with a test light or VOM. Uses: horse trailer, travel trailers, landscaping trailer, car trailer, etc.


6way_vehicle.jpg 6 way tow vehicle side.
6way_trailer.jpg 6 way trailer side.
7 Way Systems

Round 2" diameter connector allows additional pin for auxiliary 12 volt power or backup lights. Uses: heavy duty landscaping trailer, car trailer, boat trailers, horse trailer, travel trailer, construction trailer, etc. Check with a test light or VOM.


7way_vehicle.jpg 7 way RV flat blade tow vehicle side.
7way_trailer.jpg 7 way RV flat blade trailer side.

Jan 01, 2011 | 2001 Pontiac Montana

1 Answer

Need firing order for coil pack, 1994 ford explorer,4.0


V8 or V6

Cyl 1 thru3 or 4 ---front to back --pass side

Cyl 4 thru 6 --or 5 thru 8 in case of V8 --driver side

V6 1-4-2-5-3-6

V8 1-3-7-2-6-5-4-8

Mar 12, 2010 | 1994 Ford Explorer Limited

1 Answer

Need to hook uo a flat four trailer conector ,dont know ford


The rear lights :

Brown is the parking lamps ( either side )

Driver's side Stop / Turn : Light green w/ White stripe wire
Pass Side Stop / Turn : White w/ Light blue stripe wire

Another option ( for use with the factory trailer circuits ) is to add / replace the factory tow adapter. eTrailer has them, if you are interested. This is the type adapter as Ford p/n: YL3Z-13A576-G. You would need to install the relay and the fuses for the trailer circuits if you do this.

Nov 03, 2009 | 2001 Ford F150 Styleside SuperCrew

2 Answers

I am looking for the wire under the rear of my 99 explorer to hook up the wiring harness for trailer or boat. HELP


From the factory there is an unused plug in the left brake light harness. You can get a tow light cable from Ford that's JUST for that, and its a 4 flat plug on the end. I 'found' mine in the compartment on the left where the jack is. Just peek in there with a light. It was still in the package. Otherwise call Ford, the thing plugs in and you route it down and there's a bracket to hold part of it under the bumper to an existing screw location.
-Cheers.

May 09, 2009 | 1999 Ford Explorer

2 Answers

Trailer towing fuses


Battery junction box (BJB) fuse(s):
  • 5 (30A) (trailer electric brake controller)
  • 34 (25A) (trailer tow turn relays)
  • 42 (30A) (trailer tow parking lamps)
  • 44 (30A) (trailer tow battery charge relay switch side)
  • 63 (15A) (trailer tow reversing lamps

Mar 20, 2009 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Fender brake lights not working


You should probably check the multi-function switch. This is the turn signal switch assembly. The brake lights on most all vehicles, are routed through the turn signal switch, and then go to the rear of the vehicle. This is done because the brake light bulb on many vehicles is used as a turn signal bulb as well, and there has to be a way to break the connection from the brake light circuit to allow the turn signal to operate on the same bulb. Use caution when checking or removing the multi-function switch assembly, as you must remove the protective cover from the steering column, and there is an air bag harness located inside. If in doubt, always refer to the manufacturer's service guidelines for making any repairs in or around the steering column.

Nov 10, 2008 | 1997 Ford Explorer AWD

Not finding what you are looking for?
1999 Ford Explorer Logo

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...