Question about 2006 Pontiac Vibe

Open Question

Glass ball paper weight stuck in my cup holder. unable to remove

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The cupholder in my Montana is stuck,and won't come out...what do I take apart to get it back out?


Dash Cup Holder is stuck and won't come out, how do I fix ...

www.fixya.com/.../t10005627-dash_cup_holder_stuck_won_39_t_come
Aug 5, 2011 - Dash Cup Holder is stuck and won't come out, how do I fix it? - Saab 2004 9-3 ... How do I remove an in-dash cup holder in my 2005 Chevy Malibu. Apr 26, 2014 ' 2005 ... Nov 05, 2012 ' 1999 Pontiac Montana ยท 1 Answer ...

cup holder montana van Questions & An


Dec 26, 2015 | Cars & Trucks

1 Answer

Replacing cup holder


I assume you mean the one that flips up in the center console?

If so, there are three likely issues.

1) did you slide out the retainer from the upper screw? the top screw had a cover that had to be pried off. you then took the screw out. Lastly you have to slide out the plastic retainer that the screw went into. It slides out towards the opening.

2) you have to have the cup holder partially open to remove it. the hinged part that folds up is stored in the cavity under the console when closed. you have to open the cup holder and keep pushing until the front of the cup holder lip comes up. Work the cup holder up and down until it comes out.

3) the cup holder is stuck in place due to years of spilled liquid. If you've done the above, then you can either spray soapy water on the creases around the opening and let it set, or you can apply strategic brute force.
Be aware through. if this is the center console cup holder just behind the gear shifter. There are two screws and nothing else to hold it in. Just be carefull....

Mar 17, 2014 | Volvo S80 Cars & Trucks

1 Answer

1999 subaru outback cup holder stuck


the only way to fix this is the hard way.
you need to remove the pop out trim the holds the dash cup holder
carefully pry the edges around the trim to remove it
once its out you can unscrew the cup holder then try to see why its no longer working

Dec 15, 2013 | Subaru Cars & Trucks

1 Answer

Want to remove console to replace cup holder on 05 crossfire.how do you remove hand brake handle?


right above the cup holder is a cover the length of the cup holder remove it pops out.
2 screws hold the cup holder 2 hold the bezel u only need to take the 2 for the bezel out. The rest will pop off and disconnect the connectors for the AC and so on.

Mar 03, 2011 | 2007 Chrysler Crossfire Convertible

1 Answer

How can I replace broken mirror glass volvo S40 2002?


You can replace it a couple of ways, my wife broke my side mirror with a paint ball gun, so I just cut a piece of mirror and glued it in the holder. Worked great for years, Till I found a new mirror, and took the real glass out and snapped it in the holder. But you can remove the holder by taking off the plastic cover inside the car behind the mirror, unbolt the holder and hang on to it, it is heavy. You might have to pull the door panel to get the wire disconnected. Then you can either replace it or work on it easily. Hope this helps.

Apr 15, 2010 | 2002 Volvo S40

2 Answers

Remove the door that covers cup holder in the center console of a 2007 hyundai sonata


I dropped a card in between there a few months ago and had to retrieve it. Don't waste your time trying to fish it out..it's almost impossible and very time consuming. All you have to do is pull the rubber out from around the shifter and pry the entire plastic covering up. Be as gentle as possible. It should pop right off. Make sure the pull on the E brake so that you can remove the cover, as well. Hope it works for ya!

Apr 28, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Cup holder is stuck down


stick your hands in the cup holder, press against the sidewalls of the cup holder and pull up, there are only 2 metal clips that hold the cup holder assembly in place, it will pop right out, once out check for things obstructing the cup holder lid or broken tracks, a new one is 90-115 bucks or about 20 at a junkyard, just went through this myself

Oct 21, 2008 | 2002 Toyota Camry

1 Answer

2000 Honda Odyssey Coin Holder


open the cup holder shine a light above it you will see a tab you can use a screwdriver to seperate the tabs and the cup holder will slide out

Sep 04, 2008 | 2000 Honda Odyssey

1 Answer

An Item Has Fallen Into The Space Behind The Cup Holder? Help.


I recently had to retrieve a small object (camera battery) that was dropped in the cup holder. The battery allowed the cup holder to close properly, but it would not allow the cup holder to open all the way, making the cupholder useless. Getting access to remove the object was quick and easy - all it takes is a small flat blade screw driver. Use the screw driver to gently pry up the wood trim panel in front of the cup holder. Be sure to pull it up evenly from both sides and it will pop out of its retaining sockets. You'll then have the access you need. When you've finished, just realign the wood trim piece and tap it back into place. You can see a picture of where to pry at http://info5000.com/LS400_trim.jpg

Jul 06, 2008 | 2000 Lexus LS 400

Not finding what you are looking for?
2006 Pontiac Vibe Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...