Question about Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1995 Dodge Dakota Pick up
go to Didgeforums.com.
I had a similiar problem, found the solution there. It was the wiring harnes on the drivers side under the hood, just above the wheel well. there are a cluster of wires in a bundle. I unpacked the bundle carefuly and sure enough the were two or three wires all coroded, had wite powder from corosion. repaired the connections and bingo. I posted details at dodgeforums.com. browse around there. I posted pictures as well. this is a common problem.
Posted on Sep 05, 2008
turn the key to the on position a see if you can here a buzzing sound around the fuel tank,if you don't hear a sound then. (be very careful while doing this) with the key off take a fuel line coming from the tank loose,make sure its pointed away from you and turn the key to the on position,see if any gas comes out,if not then your fuel pump is probably bad.
Posted on Mar 05, 2009
Tips for a great answer:
Sep 26, 2014 | Cars & Trucks
Jan 23, 2014 | 1985 GMC S-15
Apr 17, 2013 | 1995 Dodge Dakota
Nov 20, 2012 | 1992 Dodge Dakota
Nov 06, 2012 | 1992 Dodge Dakota
Engine stalling and rough run
issue at low speeds
is commonly caused by a dirty automatic idle speed control valve and
throttle valve. Buy a can of throttle valve cleaner (do not use
carburetor spray cleaner!) from NAPA or Carquest (made by CRC
chemicals) and spray it into the air intake while the engine is
running, use up about 1/2 the can, engine will try to stall hold the
speed up, shut it down and let it soak for 30 minutes, restart and
blow out the remaining fluid, shut it down and disconnect the
negative battery cable for 5 Min's to reset the base idle control. If this doesn't improve the problem you have mechanical problems in the engine like a low cylinder die to worn rings or leaking valve seats.
Jun 23, 2012 | 1990 Dodge Dakota
Jul 08, 2010 | 1991 Dodge Dakota
Jan 23, 2009 | 1992 Dodge Dakota
Jan 21, 2009 | 1998 Dodge Dakota
133 people viewed this question
Usually answered in minutes!