Question about 2005 Kia Spectra

1 Answer

Po156 po161 po446 - 2005 Kia Spectra

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Kia Master
  • 42,159 Answers

Code p0156 refers to heated oxygen sensor 2 bank2 circuit malfunction===causes--heating inoperative--wiring---HO2S--EcM
code p0161 refers to HO2S 3 -circuit malfunction==causes the same as p0156
p04456 refers to evaporative emission (EVAP) system-vent control-circuit malfunction====causes--wiring--EVAP canister purge valve--ECM

Posted on Oct 13, 2013

  • Rolz Saints
    Rolz Saints May 27, 2014

    where exactly are the location of the sensors?

  • Bill Boyd May 27, 2014

    the HO2s and Ho2 sensors are at either endf the cat converter and the EVap will be close to the canister or in that system. get a workshop manual and it will show you exactly where and how to replace.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi speed miss over 50mph


On a Ford. bank 1 is on the side where cylinder #1 is and bank 2 is on the side where cylinder #1 isn't.

On the Expy, cylinder #1 is on the right bank, aka the passenger side.

Mar 10, 2014 | 1998 Ford Expedition

1 Answer

Car drags upon slow down and **** upon movement


CODE PO161 IS REGARDING OXYGEN SENSOR BANK2 SENSOR2 WHICH IT IS LOCATED IN THE BOTTOM RIGHT SIDE OF THE CAT ON THE OUTPUT OF THE CAT.REGARDING CODE P1135 IS FOR AIR FUEL RATIO OXYGEN SENSOR MALFUNCTION BANK1 SENSOR 1. MY OPINION CHANGE THE SENSOR BANK 2 AND RESET THE FAULT USING A SCANNER AND DRIVE IT. I BELIEVE WILL SOLVE THE PROBLEM.

Aug 31, 2012 | 2002 Toyota RAV4

1 Answer

Po 161 and p1135


PO161 IS FOR OXYGEN SENSOR BANK2 WHICH IS LOCATED IN THE BOTTOM RIGHT OF THE CAT (PASSENGER SIDE ) ON THE OUTPUT OF THE CAT..
P1135 AIR FUEL RATIO OXYGEN SENSOR MALFUNCTION BANK1-IS NOT NEED TO RENEW IT. CHECK WHETHER YOU HAVE THE AIR FILTER CLOGGED,OR WEAK SPARK CABLES OR WORN SPARK PLUGS,AS THESE ARE THE CULPRITS WHICH CAUSING THE AIR FUEL MIXTURE BE OUT OF RANGE AND CAUSE THE OXYGEN SENSOR TO FAIL. MY LAST OPINION CHANGE THE OXYGEN SENSOR BANK 2 ( PO161)AND RESET THE CHECK ENGINE LIGHT USING A SCANNER AND DRIVE IT. IF NO LIGHT COMES ON SHOULD BE THE ONLY FAULT.

Aug 31, 2012 | 2002 Toyota RAV4

1 Answer

Fix code po161 on 95 mustang 3.8


P0161(O2 Sensor Heater Circuit (Bank 2 Sensor 2). ...

Nov 13, 2009 | 1999 Dodge Intrepid

2 Answers

2001 Camry code po440,po441,po446 after engine


2001 camry code po440,po441,po446
what kind of problem and how can be solved
sam

Jun 08, 2009 | 1998 Toyota Camry

2 Answers

1997 toyota camry check engine light on codes are po441,po446


p0446 is an evap code for incorrect purge flow, check the rear vacume switching valve. its above the rear sub frame

Apr 05, 2009 | 1997 Toyota Camry

1 Answer

The green overdrive light on the dash keeps flashing and the transmission jerks into gear. Any suggestions on how to solve this. The test codes that come are P1747, PO156, and PO161. I have already...


not an oxygen sensor



vehicle speed sensor or oss is most likely cause.


Output Shaft Speed Sensor (OSS) 7H103: The output shaft speed (OSS) sensor is a magnetic pickup, located at the output shaft ring gear that sends a signal to the powertrain control module to indicate transmission output shaft speed. The powertrain control module uses this signal for torque converter clutch control, shift scheduling, used in determining EPC pressure. Symptoms: No converter engagements, harsh shifts, abnormal shift schedules. DTC: P0720, P0721 std~us~en~file=d14110a.gif~gen~ref.gif


Vehicle Speed Sensor (VSS) 9E731: The vehicle speed sensor is a magnetic pickup that sends a signal to the powertrain control module. This VSS signal tells the PCM vehicle speed. The PCM uses this signal to modify upshift schedules. Symptoms: Shift engagement/disengagement (hunting) on grades. DTC: P0500, P0503, P1500, P1501, P1503

Mar 15, 2009 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
2005 Kia Spectra Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8201 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...