Question about 1992 Honda Accord

1 Answer

1992 honda accord timing marks

How do u find the timing marks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 92 Answers

Timing light. If don't know what your doing would bring to garage they got all info there.

Posted on Oct 13, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

95zcvtecsi
  • 26 Answers

SOURCE: 1992 honda accord ex timing belt

yes this engine is a interference engine. Make sure you did not bend the valves when it boke.

Posted on Jul 21, 2008

  • 97 Answers

SOURCE: 1992 honda accord spark plugs and wire

chilton or haynes manual will give you all this and every thing else you need for your vehicle

Posted on Aug 10, 2008

  • 1 Answer

SOURCE: Tire Size for a 1992 Honda Accord

they should be 14" tires

Posted on Jun 14, 2009

YellowNo5
  • 268 Answers

SOURCE: timing marks on 1992 honda accord 2.2l

The cam points UP, either pull the rubber access plug to see your flywheel/flex plate marks aligned with the pointer inside or stick a long screw driver inside the spark plug hole closest to your cam gear (with spark plug out). Turn the main pulley counter clockwise (bottom end) with a 3/4 or 19mm socket until the screw driver is raised as high as it will go. This will show you TOP DEAD CENTER.

Posted on Sep 23, 2009

ZJLimited
  • 17970 Answers

SOURCE: need diagram showing timing adjustment for a 1992

Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft pulley must be aligned so that the word UP isat the top of the pulley and the marks on the edge of the pulley arealigned with the surfaces of the head. Additionally, the face of thefront timing balancer pulley has a mark which must be aligned with thenotch on the oil pump body. This pulley is the one to the left crankwhen viewed from the pulley end.

Also, in here, 1994-Honda-Accord-Coupe-Section-01-Engine (page 47 and next / TDC marks) you can find referenece information about Accord Engine.

If you need more details, visit autozone.com (free register) and select your model vehicle.

I hope help you (remember rated this help) Good luck.

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Set timing on a 1992 honda prelude, 2.3 engine, I REPLACED THE DISTRIBUTER AND NOW ITS COMPLETELY OUT OF TIME, detailed instructions please


  1. Locate the service check connector and, if applicable, remove the cap. On 1988-91 Preludes, the cap is yellow and the connector is located next to the vacuum control box in the engine compartment. On 1992-95 Preludes, the service connector is located under the middle of the dash. On 1990-93 Accords, the connector is blue and is located behind the right front kick panel, under the dashboard. On 1994-95 Accords, the service connector is located behind the glove box. Use a jumper wire to connect the two terminals of the service connector.
  1. Following the manufacturers instructions, connect a timing light to the engine. The positive and negative leads connect to their corresponding battery terminals and the spark plug lead to No. 1 spark plug wire.
  2. Make sure that all wires are clear of the cooling fan and hot exhaust manifolds.
  3. Set the parking brake and block the front wheels. Start the engine. Check that the idle speed is set to specifications.
  4. Point the timing light at the timing marks. On all models except 1994-95 Accords, the marks are on the flywheel. On the 1994-95 Accords, the timing marks are on the crankshaft pulley. When the engine is idling, the red mark must align with the pointer. Some timing marks are indicated by 3 lines; the center one must be aligned with the pointer.

  1. If necessary to adjust the timing, loosen the distributor hold-down bolt(s) and/or nut and slowly rotate the distributor in the required direction while observing the timing marks.
  2. To complete the adjustment operation, tighten the hold-down bolt, taking care not to disturb the adjustment.
  3. Switch the engine OFF . Reinstall the rubber plug in the timing window and remove the timing light. Remove the jumper wire.



0900c1528005f368.jpg

Fig. Fig. 4: Service connector on 1988-91 Preludes


0900c1528005f36b.jpg

Fig. Fig. 5: Service connector on 1992-95 Preludes

Mar 03, 2011 | 1992 Honda Prelude

1 Answer

When setting timing on a 1992 honda accord what is the diffrence between the red and white mark.


The RED mark is the timing mark and the WHITE mark is for Top Dead Center for #1 piston.

Dec 27, 2010 | 1992 Honda Accord

1 Answer

1992 honda accord timing markings


The timing marks for that car is located between the engine and transmission. There is a rubber plug(appx.2" long) on the front of the tranny bell housing, directly below the distributor, that allows access to see the timing marks with a timing light..

May 15, 2010 | 1992 Honda Accord

1 Answer

1992 honda accord timing markings


www.autozone.com
free repair manuals and pictures are online...this has been very useful for me.

Mar 29, 2010 | 1992 Honda Accord

1 Answer

Need diagram showing timing adjustment for a 1992 honda accord 2.2 engine see no timing marks how do i set timing


Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft pulley must be aligned so that the word UP isat the top of the pulley and the marks on the edge of the pulley arealigned with the surfaces of the head. Additionally, the face of thefront timing balancer pulley has a mark which must be aligned with thenotch on the oil pump body. This pulley is the one to the left crankwhen viewed from the pulley end.

Also, in here, 1994-Honda-Accord-Coupe-Section-01-Engine (page 47 and next / TDC marks) you can find referenece information about Accord Engine.

If you need more details, visit autozone.com (free register) and select your model vehicle.

I hope help you (remember rated this help) Good luck.

Sep 25, 2009 | 1992 Honda Accord

1 Answer

Timing marks on 1992 honda accord 2.2l


The cam points UP, either pull the rubber access plug to see your flywheel/flex plate marks aligned with the pointer inside or stick a long screw driver inside the spark plug hole closest to your cam gear (with spark plug out). Turn the main pulley counter clockwise (bottom end) with a 3/4 or 19mm socket until the screw driver is raised as high as it will go. This will show you TOP DEAD CENTER.

Sep 15, 2009 | 1992 Honda Accord

1 Answer

92 honda accord engine mount is in the way


Is it in the way of access to the timing belt cover? If so, remove the bolt, and let the engine drop down. You may have to loosen the other Mounts and physically force the engine down. Instead of removing the wheel well, you can drill a 2 inch hole into it, once you see where the timing marks are.

Jul 11, 2009 | 1992 Honda Accord

1 Answer

1992 Honda Accord slowly accelerates


Sounds like a bad timing belt. timing belt may need to be replaced,or igniting timing may be off. here is a digram if you need help with timing .http://www.2carpros.com/car_repair_information/tec_info/1992/honda/accord/1992_honda_accord_timing_belt_diagram_marks.htm Good luck and thanks for using FIX YA.

Mar 04, 2009 | 1992 Honda Accord

1 Answer

1992 honda accord


there is timing marks on the camshaft where you line it up it can be difficult

Jul 30, 2008 | 1992 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...