Question about Oldsmobile Intrigue

1 Answer

Component location for oil filter - Intrigue Oldsmobile Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 89 Answers

If it set up like a cavaler it would be located under the hood on the driver side up front its a black cap that has a nut like on top they are made out of plastic careful

Posted on Oct 12, 2013

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 4793 Answers

SOURCE: Oil plug location and do you have to remove any

you have to drop the "splash guard"from under the car,its just 1/2 turn screws,the sump plug is on the bottom of the lower oilpan.and the filter is between the firewall and the engine.this is a simple job.....use axle stands/ not climb under a jacked up car....

Posted on Nov 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the the oi filter and evap on 2005 sunfire

Jul 17, 2012 | 2005 Pontiac Sunfire

1 Answer

Where is the crankshaft position sensor located its a 2002 dodge neon

The crankshaft position sensor is located between the alternator and the oil filter. You can identify this small component by the electrical connector attached to it and the single bolt that secures it to the engine block.

Mar 07, 2011 | Dodge Neon Cars & Trucks

2 Answers

Service 100 thousands miles

The 04 was pretty straight forward.

Change the oil and filter when the display tells you to. (Don't forget to reset Oil Life system!)
when the display tells you to change engine oil... Do the following as well:
~Lube Chassis Components
~Check Tires for Air and Damage
~Inspect Break System
~Check Engine Fluids and Washer System
~Check Power Steering System
~Check Wiper Blades
~Check Restraint System
~Lube Body Components (See manual)
~Replace Cabin Air Filter (Located in firewall on passenger side.)

Every 25K miles do the following:
~ Inspect Fuel System, Exhaust System, Accessory Drive Belts for damage or wear.
~ Replace Air Cleaner

Ever 50K Miles
~ If used for Towing - Replace Transfer Case Fluid :: If not change fluid ever 75Kk miles.

Every 100k Miles
~ Change Automatic Transmission Fluid and Filter
~ Change Automatic Transmission Fluid and Filter again at 150k if heavy service
~ Replace Spark Plugs

Every 150k miles
~ Change Engine Coolant (Or every 5 years which ever comes first!)
~ Replace Engine Accessory Drive Belt

optional y are supposed to change the transfer case fluid every 50k if towing

Feb 27, 2011 | 2005 Cadillac SRX

1 Answer

Idiot light and buzzer for oil coming on at low rpms. Oil level on full. Engine not overheating no excessive noise from lifters. Assuming sending unit or oil pressure switch. Not sure where these are...

It might be the sender unit or you are using an oil grade that is too thin and the oil pressure is down a bit. However, the oil pressure switch is located on the engine block above the sump level and looks a bit like a small spark plug with black insulation. It has one wire coming from it with a press on connector. Replace it and if you have the same problem the next in line would be:-
Oil change and filter (20W-50)
Leaking oil pressure relief valve
Worn oil pump
Worn valve train components
Worn bearings

Feb 08, 2011 | 1992 Volkswagen Passat

1 Answer

Oil plug location and do you have to remove any componants in order to change the oil filter.

you have to drop the "splash guard"from under the car,its just 1/2 turn screws,the sump plug is on the bottom of the lower oilpan.and the filter is between the firewall and the engine.this is a simple job.....use axle stands/ not climb under a jacked up car....

Nov 20, 2010 | 2003 Volkswagen Passat

1 Answer

Where the oil filter located on 4.4

Oil Filter Operation:
00000_oil_filters.jpgA component, located near the oil pump, that removes abrasive particles from the motor oil by a straining process as the oil circulates through the lubrication system. How To Instructions:
Inspect - Check for obvious problems.
Replace - Out with the old, in with the new.
Check underneath the car on the engine (not the transmission which has the driveshaft(s) inserted into it) It's not in the oil pan, it's located somewhere on the block. Good luck finding the oil filter on your 2005 BMW X5 Check's site. I was having trouble with it, unfortunately, because they were experiencing technical diifficulty with the 'oil filter' section of their site, when I clicked on 'Replace'. Autozone's website didn't have a location for it under the 'location' part of their website.

Nov 12, 2010 | 2005 BMW X5

1 Answer

How do I get to the oil sending unit

The oil pressure sender is a sensor connected to your engine block. It has two wires connected to it and one is directly linked to the oil pressure gauge located on your dashboard. The sender is typically located at the front of your engine block near the fuel filter and close to the intake manifold. Applications vary, so be sure to check your owner's manual to confirm its actual location. You should have easy access to it from the front of the engine block, but you may still need to remove some parts or components to reach and replace it like the fuel filter. You'll need to detach the two wires connected to the outside, unscrew the sender from its housing, clean the gunk out of the threads in the housing, pre-seed the threads of the new sender with a light film of oil, and then screw the new oil pressure sender back into the housing. The final steps include re-attaching the two wires and any removed components like the fuel filter.

Oct 14, 2010 | 1996 Volkswagen Jetta

2 Answers

P0345 Code, where is camshaft position sensor "A" (bank 2)

The Camshaft Position Sensor (CMP) on the 4.0L 6cylinder engine is bolted to the top of the oil pump drive shaft assembly. The sensor and drive shaft assembly is located on the right side of the engine near the oil filter.


Fig. 1: Component locations-ES300


Fig. 2: Component locations-ES300

Hope this help; remember comment and rated this. TY for using Fixya.

May 06, 2010 | 2002 Lexus ES 300

1 Answer

Where is the oil filter located on my 1990 grand am

Alero, Grand Am 1999-2005 Repair Guide.

Fig. Fuel filter mounting location and component identification


Fig. Exploded view of the fuel filter mounting

Hope help with this (remember rated and comment this).

Mar 11, 2010 | 2004 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides