Question about Cars & Trucks

1 Answer

Problem code p2187

P2187 iudle bank one

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 40,854 Answers

Code p2187 refers to system too lean bank 1==causes -- fuel pressure--injectors--intake leak---ECM It also refers to adaptive heated oxygen sensor (HO2S) control bank 1 no signal===causes --wiring ---HO2s---ECM Have a pressure test done on the fuel manifold to check fuel pressure ,regulator and filters.. Check for vacuum leaks in the manifold including all hoses.. Replace the oxygen sensor.

Posted on Oct 13, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

localwonder
  • 6784 Answers

SOURCE: code P2187

P2187 System Too Lean at Idle (Bank 1)

Check the MAF. this could be the reason for the O2 reading lean. if the MAF is ok and, the sensor is not damaged, replace the Os sensors.

Posted on Jul 17, 2009

  • 1 Answer

SOURCE: CHECK ENGINE CODE P2187 SAYS

i had the same code, p2187. check to the left of the throttle body(side facing the front of the veh.
there are 2 vaccum hoses going into the intake. the larger one on top has a spring clip holding it and if you look under that you'll see a smaller one with a check valve. mine was disconnected. plugs in under the larger one.

Posted on Feb 07, 2009

  • 417 Answers

SOURCE: Hyundai Sonata 2006 - Check Engine light came on.

"Fuel system too lean at idle". It's an air/fuel ratio that is not correct, possibly a vacuum leak somewhere. Or a leaky exhaust pipe. Could be related to intake manifold gasket. Somewhere, air is getting into the engine.

I suggest taking it back to the dealer under warranty. I think Hyundai is 10yr./100k for the original owner. 5yr./50k if not. Ask first if covered, and ask why not id not covered.

Posted on Apr 10, 2010

  • 5 Answers

SOURCE: what does code p2187 mean

thats not a code p stands for powertrain the next digit will be either a 0 generic obd2 code or 1 Manurfacturer spec. check your code make sure that it is right

Posted on May 03, 2010

  • 11800 Answers

SOURCE: what does code p2189 and p2187 mean on kia sadona

code p2189 and p2187 = air/fuel mixture too lean on both cylinder banks which in turn generates excessive emissions = failed inspection.
What can cause a lean mixture:
- Incorrect main charge signal
- Intake air system leaking
- Fuel pressure too low
- Volume supply of fuel pump too low
- Mechanical fault in injectors
- PCV valve leaks
- Leaks in exhaust system
- EVAP canister purge valve mechanically faulty (hangs open)
All these must be checked.

Posted on Jul 01, 2010

Testimonial: "thank you for your answers well beyond my spec but now i'll know what the mechanic is talking about sounds like no easy fix"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My audi tt engine light came on aa bloke got codes p2187 p2279 p0507 p0441 p1093


P2187: System Too Lean at Idle Bank 1
http://www.autocodes.com/p2187.html

P2279: Intake Air System Leak
http://www.autocodes.com/p2279.html

P0507: Idle Air Control System RPM Higher Than Expected
http://www.autocodes.com/p0507_audi.html

P0441: EVAP System Incorrect Purge Flow
http://www.autocodes.com/p0441_audi.html

P1093: Fuel Trim 2 Bank 1 Malfunction
http://www.autocodes.com/p1093_audi.html

Nov 06, 2016 | Audi Cars & Trucks

1 Answer

P2187, 2006 Mazda6 3.0L


start with the cheapest fix first. Locate the vacuum leak first because it can cause other codes to pop up.

May 04, 2014 | 2006 Mazda 6

1 Answer

P2187 code on 2006 sonata v6


(adsbygoogle = window.adsbygoogle '' []).push({});

P2187 System Too Lean at Idle (Bank 1) DTC
OBD-II Trouble Code Technical Description
Article byDon BowmanASE Certified Automotive TechSystem Too Lean at Idle (Bank 1)
What does that mean?
This diagnostic trouble code (DTC) is a generic powertrain code. It is considered generic because it applies to all makes and models of vehicles (1996-newer), although specific repair steps may be slightly different depending on the model.
(adsbygoogle = window.adsbygoogle '' []).push({});
This is an ambiguous code in of itself. It can be a tough code to crack without a diagnostic strategy. During the last two starts, the engine management computer has recognized a problem with the fuel mixture at an idle.
It appears that the fuel mixture is too lean (too much air and not enough fuel) at an idle. If you have a 4 cylinder engine the "Bank 1" is meaningless, however, if you have a 6 or 8 cylinder engine, Bank 1 will be on the side with the number one cylinder. Code P2189 is the same code but for Bank #2.
There is a laundry list of components that could cause this scenario. For the most part the diagnostic procedure is not difficult -- just time consuming, unless it is one of the first items checked. The strategy dictates that the driveability problems are observed and noted, then start with the most commonly found problems and progress from there.
Symptoms
With the wide range of possibilities, the problems listed may and may not be present. But, here is where it is important to pay particular attention to the symptoms observed and make a note as to what and when symptoms appear for diagnostic strategy.
Vehicle has a miss at an idle
Hard to start, especially when hot
Very irregular idle
Additional codes to pinpoint cause of original P2187 code
Whistling noises
Lower turbo boost numbers
Fuel smell
Potential Causes of P2187 DTC
Faulty O2 sensor (front)
Faulty gas cap seal
Leaky or loose oil filler cap
Air leaking into the intake manifold downstream from the Mass Airflow sensor due to the manifold itself, vacuum hoses off or cracked, leak MAP sensor, Leak at turbo bypass or it's stuck open, power brake booster hose, or a leak in the EVAP system hoses.
Faulty MAP sensor
EVAP canister purge valve
Fuel injector leak
Fuel pressure regulator faulty
Leaks in the exhaust system
Faulty variable camshaft timing
Faulty ECM (engine management computer)
Faulty O2 preheater (front)
Clogged fuel filter
Fuel pump wearing out and producing low pressure.
Faulty mass air flow sensor
Diagnostic / Repair Steps
Your strategy for locating this problem begins with a test drive and observation of any symptoms. The next step is to use a code scanner (available at any auto parts store) and pulling any additional codes.
The computer has set a code P2187 stating that the fuel mixture is lean at an idle. This is the main code, however, any component malfunctioning within this loop that has the potential to cause a lean mixture will also be set in code.
If the test drive doesn't produce any symptoms it is possible that it is not a real code. In other words, the fuel mixture is not lean and that the computer or oxygen sensor is responsible for setting the code.
Every vehicle has a minimum of two oxygen sensors -- one in front of the catalytic converter and one after the converter. These sensors signal the amount of free oxygen left in the exhaust after ignition, which determines the fuel ratio. The front sensor is primarily responsible for the mixture, the second sensor behind the exhaust is used for comparison to the front sensor to determine if the converter is working properly.
If a rough idle is present or one of the other symptoms, begin the process with the most likely cause first. Either unmetered air is entering the intake manifold or there is a lack of fuel pressure:
Check the fuel cap for cracks and sealing and function
Lift the hood and make sure the oil filler cap is tight
If additional codes were present begin with inspecting them first
Look for air leaks starting at the mass airflow sensor. Check the hose or connection between the sensor and the intake manifold all the way to the manifold for cracks or loose connections. Check all vacuum hoses carefully attached to the intake manifold, to include the one to the vacuum brake booster. Check the hose to the MAP sensor and all hoses to the turbo if so equipped.
With the engine running, using a can of carburetor cleaner and spray a small mist around the base of the intake manifold and where the two halves meet if it is a two piece. Spray around the base of the EGR for leaks into the manifold. The rpm will increase if a leak is located.
Check the PCV valve and hose for leaks.
Inspect the fuel injectors for external fuel leaks
Inspect the fuel pressure regulator by pulling off the vacuum hose and shaking it to see if fuel is present. If so replace it.
Shut the engine down and install a fuel pressure tester on the schrader valve on the fuel supply rail to the injectors. Start the engine and note the fuel pressure at an idle and once again at 2500 rpm. Compare these figures with the desired fuel pressure found online for your vehicle. If out of range in volume or pressure replace the pump or filter.
The remainder of components need to be inspected by a service facility that has a Tech 2 scanner and programmer.
Register now to ask a question (free)
Related P2187 DTC DiscussionsP0441 code and P2187 2007 V6 Santa Fecan a P0 441 code lead to a P2187 code?... P2187 CodeI've got a 2004 Mazda 6 --2.3L 4 cyl. 5 spd. 108,000 miles
The check engine light is on and the code pulled was P2187.
The car runs fine--- I've checked for vacuum leaks, cleaned the MAF sensor, and replaced the Purge Valve.
The light goes off for a day or so after resetting, but comes back on.
... Mazda 6, P0420 and P2187 togetherMazda 6, 2002 year of birth, Engine - 2.3
Check engine light and 2 errors - P0420 and P2187 together.
No more problems with car, my repairman tells that he see problem with spark timing.
What to look first of all?
Thanks in advance.... P0455 and P2187 Mazda 3 2005I have a 2005 Mazda 3 that runs fine but the following codes came up when I took it in because the check engine light came on.
P0455 and P2187
Any idea where to start? I'm afraid to take it in without having some sense of what to expect. Also I'm wondering if it's something I might be able to fix ... 2007 Mazda5 Multiple codes P2196, P2187, P0455, P0131So recently my car doesnt want to start, BUT ONLY AFTER PUMPING GAS. I actually have to depress the accelerator all the way to the floor while turning it over, and once it starts it runs rough for a few seconds and then it's fine, until I have to fill it up again. So looking around I've seen a lot a...
Need more help with a p2187 code?
If you still need help regarding the P2187 trouble code, please post
your question in our FREE car repair forums.
Share

Apr 05, 2014 | 2002 Ford Windstar Cargo

1 Answer

Bmw x5 4.4i code p0430


p2187 system too lean bank 1
p2189 system too lean bank 2
p0430 catalyst stem efficiency below threshold bank 2

You have some air leak. Gaskets/broken hoses.

Mar 16, 2014 | 2006 BMW X5 4.4i

1 Answer

Code P2187


code p2187 refers to system too lean at idle bank 1==causes -fuel pressure--injectors--intake leak
It also refers to adaptive heated oxygen sensor (HO2S) control bank 1- no signal==causes--wiring--HO2S--ECM. Have a pressure test done on the fuel manifold to check for pump/regulator filter problems and check the wiring for the oxygen sensor or the sensor itself.

Sep 06, 2013 | 2007 Porsche Cayman Coupe

1 Answer

Code p2187 and engine light on


according to the data book code p2187 is "System too lean at idle, bank 1" and the probable cause is "fuel pressure, injectors, intake leak". hope that helps

Apr 27, 2013 | 2006 Kia Carnival 2.9

1 Answer

2007 Hyundai Entourage codes P2187, PP0174,P2189,P2195,P2270,P2272


I've come across these codes before. In almost every case there was an air leak in the intake air hose (hose between the engine air filter & the throttle body). Inspect this hose & tubes attached to it. This is especially true when the lean code includes the comment 'at idle'
P2187 - System too lean at idle Bank 1
P0174 - System too lean Bank 2
P2189 - System too lean at idle Bank 2
P2195 = HO2S Signal Biased/Stuck Lean (Bank 1 Sensor 1)
P2270 = HO2S Signal Stuck Lean (Bank 1 Sensor 2)
P2272 = HO2S Signal Stuck Lean (Bank 2 Sensor 2)

P2187 & P2189 = In order to provide the best possible combination of drivability, fuel economy and emission control, the PCM uses a closed loop air/fuel metering system. The PCM monitors the HO2S signal voltage and adjusts fuel delivery based in closed loop fuel control. Changes in fuel delivery will be indicated by the long-term and the short-term fuel trim values. The ideal fuel trim value is around 0%. The PCM will add fuel when the HO2S signal is indicating a lean condition. Additional fuel is indicated by fuel trim values that are above 0%. The PCM will reduce fuel when the HO2S signal is indicating a rich condition. Reduction in fuel is indicated by fuel trim values that are below 0%. The DTC relevant to fuel trim will be set when the amount reaches excessive levels because of a lean or rich condition

Aug 31, 2011 | 2008 Hyundai Entourage

1 Answer

2007 entourage code p2187 p2189 p0171 p0174 keeps coming on cleaned mass air flow sensor with crc cleaner dont see any vacuum leaks ????help?


Here is two of your codes. Lean mixture on banks 1 and 2. There are 37 pages of Hyundai codes.

http://www.autocodes.com/p0171_hyundai.html

P0174 HYUNDAI - System Too Lean Bank 2

Read more: http://www.autocodes.com/p0174_hyundai.html#ixzz43IA8HGCb

P2187 HYUNDAI - System Too Lean At Idle Bank 1. P2189 will be Bank 2 at idle.

Read more: http://www.autocodes.com/p2187_hyundai.html#ixzz43IASlusU

Check all the bolts holding the plenum, and anything else concerned with air intake. Too much air means weak mixture.

Feb 05, 2011 | 2008 Hyundai Entourage

1 Answer

Code P2187


P2187 System Too Lean at Idle (Bank 1)

Check the MAF. this could be the reason for the O2 reading lean. if the MAF is ok and, the sensor is not damaged, replace the Os sensors.

Jul 17, 2009 | 2004 Volvo S40

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...