Question about Ford Cars & Trucks
Kinda sounds like the connecting rod inside the door had come off leavers on inside of the door to find out take your door panel off to see if it had then reconnect
Posted on Oct 12, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
unless you are mechanically inclinde don't mess with it get someoen you love and adore to do it for you, you can break the tabs that hold the door on and it can get expensive the worst part is it might not open at all if you don't understand how to operate it unless you have one of the experts here helping you with it step by step, but could take as much as 4 hours depending on your ability to work with your hands. Some people just don't need to own wrenchs they are a danger to themselves and the public at large, not saying they are not smart but just don't have the know how and motor skills. I am telling you this so you won't have a headache on your hands.
Posted on Jun 26, 2009
Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
Posted on Jul 18, 2009
It sounds like the linkage connecting the door handle to the latch has disengaged....you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. You can then pull off the weather seal in order to see the inside of the door....
Posted on Aug 20, 2009
I just fell into the same situation. My interior driver's door handle just does nothing all of a sudden. I went on the Mazda Forum website and came away with at least a temporary fix.
The lock switch can be used to open the door from the inside by pushing it the opposite way it's pushed when locking the door. In other words, the rear portion of the lock switch needs to be depressed and the front portion needs to be pulled away from the door. It may be difficult to do with the trim piece around the lock still on. The trim piece can be removed by pulling the small plastic cap away from the base (it's on a plastic hinge) off and unscrewing the holding screw underneath it. Pull the handle away from the door and the trim piece will come right off.
I'm using that as a temporary solution now until I get a new/used door assembly.
Hope that helps.
Posted on Oct 06, 2009
Tips for a great answer:
Dec 02, 2015 | Cars & Trucks
Jan 26, 2014 | Cars & Trucks
Jun 26, 2013 | Dodge Dakota Cars & Trucks
Mar 19, 2013 | 2001 Isuzu Rodeo
Jan 26, 2013 | 1996 Chevrolet C/K 2500
Jan 21, 2013 | Cars & Trucks
Nov 16, 2012 | 2006 Volkswagen Jetta
May 07, 2012 | 1986 Nissan 300ZX
Jun 23, 2009 | 2001 BMW 5 Series
13 people viewed this question
Usually answered in minutes!