Question about 2005 Chevrolet Trailblazer Ext

1 Answer

Will a P2135/P2135 be caused by frayed wires on a fan clutch

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 20,706 Answers

Great question,
answer ,why not fix the obviously bad, want to blow a fuse and get stranded.? many circuits on all cars are shared.
most books.web/Fsm or other sites for DTC mostly fail to say
"or lost power to same "
as a tech , we dont have to learn that, we know, that.
the first thing that must work with all electronics is POWER>
no power no joy, end story. we check it for drop and noise.


2135
Possible causes (simplistic)
- Faulty electric throttle control actuator (TP sensor 1 and 2)
- Throttle Position Sensor harness is open or shorted
- Throttle Position Sensor circuit poor connection
- Faulty accelerator pedal position sensor

Posted on Oct 12, 2013

Testimonial: "my problem turned out to be a bad fan clutch"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan speed sensor circuit?


Check you connection on the passenger side at the radiator near the top. Make sure this connection is not frayed. You may need a new fan clutch if wires are all in tact.

Sep 04, 2015 | 2005 GMC Envoy

1 Answer

Fan clutch wont come on


the coolant temp sensor should be tied into both the gauge and the clutch . the sensor tells the fan clutch to come on if the vehicle is going above the normal operating temp. also check the wiring leading to the sensor and the clutch for broken or frayed .

Feb 28, 2014 | 2005 Dodge Ram 3500

1 Answer

P0106/po526 code


2 different problems....106 is MAP sensor code, clean your throttle body with the battery disconnected. 526 is fan speed sensor. There is a common problem with the connector that goes into the fan clutch. Check for frayed wires here or burnt connector, if all ok, may need new fan clutch.

Jan 24, 2014 | 2004 GMC Envoy

1 Answer

Clutch not working when temperature is high


You mean fan clutch? If so, check the wiring harness for frayed wires. These fan clutches for Envoys and Trailblazers tend to go out often. BUT, the more common problem is for the fan clutch to stay engaged, keeping the engine temperature too cool.

On another note, if you think 210 degrees is too high.....that's what it's supposed to run at, these engines run hot and should be dead on 210.

Feb 25, 2011 | 2004 GMC Envoy

1 Answer

Service engine light came on and we put in on a computer and it gave the code p1481 what does this mean


This is almost always the fan clutch. Years 2002-2004 are prone to fan clutch failure. Also a good idea to check out the harness for any frayed wiring.

Feb 06, 2011 | 2003 Chevrolet Trailblazer Ext

2 Answers

2001 olds intrigue obd code po480


CODE PO480 IS COOLING FAN RELAY 1 CONTROL CIRCUIT MALFUNCTION CONDITIONS.

Feb 03, 2011 | Oldsmobile Intrigue Cars & Trucks

1 Answer

92 eldorado coolant fans dont come on


the fans have relays that are located in the fuse box under the hood on the driver side. a quick check involves just switching the a/c clutch relay with the fan relay if they turn on when engine is hot the relay is bad. if not that means there is a bad connection or the temp probe is bad. make sure no loose or frayed wires are present. hope this helps. please rate this solution. thank you.

Aug 29, 2008 | 1999 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...