Question about Cars & Trucks
Go to www. advanceautoparts.com ask about the price aprox.
God bless you
Posted on Oct 12, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a clip under the center of the blade itself push in on that and slide wiper off the armature replace simply by installing it the same way you removed the old ones they will click into lock by itself
Posted on Oct 16, 2009
I have an '06 Honda Civic. The most common places where the code is found is on the left side of the glove box, in the trunk somewhere along the gasket or underneath where the speakers are, under the fuse box panel, under the ashtray and sometimes under center console lid. I happen to find my in the left side of the glove compartment. The first five digits are the code and under that, you should see and 11 digit code which is your radio serial. So once you have the code if you haven't already, turn on the radio. It will ask you for the code and you punch it in using the number on the buttons you use to change your radio stations. As you punch in numbers "CODE" will start to fill in. Just like the asterisks used in passwords. If you punch it incorrectly, it will say "error 1" or something to that effect. Do not push anything else, just start over by punch in the first number of the code and then the rest. Be careful, if you attempt too many times, the radio will lock itself and you will need to leave the radio on for an hour for it to reset itself. When successful done, the radio will turn back on to the last station you were last on. Hope that helps.
Posted on Dec 08, 2009
SOURCE: 2006 honda civic rear middle
hi it sounds like the safty mechanisum in the belt has been activated some how this happens when a ball bearing falls down into a safty postion and locks the belt up into place you can strip and remove the little ball bearing and have your seat belt working again but no longer will act as it should in a crash so i would strongly advise to change the hole seat belt system .
Posted on Sep 02, 2010
Tips for a great answer:
Dec 23, 2016 | 2010 Honda Civic
Jan 18, 2016 | 2006 Honda Civic
Jan 30, 2015 | 2006 Honda Civic
Apr 03, 2013 | 2006 Honda Civic Coupe
Feb 03, 2013 | 2006 Honda Civic 1.8
Jul 20, 2012 | 2006 Honda Civic
Jan 22, 2011 | 2006 Honda Civic Hybrid
Jan 22, 2010 | 2006 Honda Civic Hybrid
Dec 08, 2008 | 2006 Honda Civic Hybrid
24 people viewed this question
Usually answered in minutes!