Question about Chevrolet S 10

Open Question

Removal of 4.3 valve cover on passenger side of Chevy S10

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 110 Answers

SOURCE: oil leak on manifold passenger side - v6 4motion

Get a can of Gunk and clean the engine according to the directions there (please do read them), with attention to the area around where the oil leak is.  Once you get the motor squeaky clean, you will be able to trace back to where the oil is coming from.  It may be running down the underside of a hose so you will need to look carefully.  You can do all this in the driveway.  You will probably have to let the engine get to operating temp before it will start leaking. 

Posted on Nov 01, 2008

Ad
  • 1861 Answers

SOURCE: Removal of valve cover

30 millimeter socket

Posted on Dec 29, 2008

redbeard00
  • 957 Answers

SOURCE: I have a 1986 Chevy Blazer S10 no oil in valve cover

The age of the blazer makes me wonder. How is the maintenance on the truck? Usually you hear this issue and you look to see if there is oil pressure, if its present then is there sludge or contaminates blocking the flow of oil. Would you give more info.

Posted on May 14, 2009

outdoorsman5
  • 631 Answers

SOURCE: Vaccum hose diagram for 97 chevy tahoe 5.7 liter

I have the diagram you need. If you send me your email I will scan it off and send it to you. outdoorsman592003@gmail.com

Posted on Sep 12, 2009

SOURCE: Leaky valve cover valve on passenger side on 1996 Nissan Pathfind

no such thing as a valve cover valve. you have a leakey valve cover and you replace the gasket, if you do one do both they come in a kit. also to do that job you have to do the intake gasket and plenum gasket as well. about $150.00 in parts maybe 5 hours labor

Posted on Jan 19, 2010

Testimonial: "Thanks I will try that and see what happens"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the purge valve solonoid for a 2000 chevy cavalier?


How do I test a purge solenoid? / Diagnosing an EVAP ...

www.ericthecarguy.com/.../13335-how-do-i-test-a-purge-solenoid-diagn...
My brothers 2000 Chevy Cavalier has a P0440 code. ... the PCM will test the circuit condition of the purge valve solenoid and vent valve solenoid so with the key ...

P0446 2000 chevy S10 4WD Replacing EVAP Vent Valve ...

? 7:54
https://www.youtube.com/watch?v=EVWDc9sM1Co
May 7, 2014 - Uploaded by omar ERA
code .P0446. ... Chevy Truck Hard To Fill Gas Tank - GM EVAP Codes P0442, P0446, P0455 or P0449 ...

EVAP Purge Solenoid Removal - YouTube

? 4:24
https://www.youtube.com/watch?v=Xj605HENFno
Feb 26, 2008 - Uploaded by richpin06a
EVAP Purge Solenoid Removal Saturn S-series. ... Hi, is thispurge can solenoid in the same location for ...

Dec 19, 2015 | 2000 Chevrolet Chevrolet Cavalier Base

1 Answer

Driver side valve cover removal 1998 chevy silverodo


Hi Randy, I'm Al the owner of Big A's Auto Repair
Randy, valve covers are easy to remove, what makes it difficult is all the stuff you need to remove to get to the valve cover. If this is your first valve cover, here's a suggestion, take a picture with you I-Phone before removal to help you know where everything goes with re-installation. If you need further help visit my website. Have an awesome day Randy.
Auto Repair

Feb 01, 2015 | Cars & Trucks

1 Answer

Location of heater control valve on a 91 Chevy S10 Pickup V6 2WD


way up under the dash on passenger side....follow inlet hose to interior of vehicle should be towards the end inside near heater coil.

Nov 11, 2014 | Cars & Trucks

1 Answer

Where is the heater control valve on 2001 chevy s10


i would look under the instrument panel on the passengers side, up towards the heater core area, it should be in line with the hoses., if it is not there, then look at the heater hoses, under the hood on passsengers side, there has been many models that had the heater control valve in that area also.

Apr 04, 2011 | Chevrolet S 10 Cars & Trucks

2 Answers

Valve cover gasket, how to replace?


Rocker Arm (Valve) Cover REMOVAL & INSTALLATION 2.3L 4-Cylinder Engines
  1. Disconnect the negative battery cable.
  2. Label and remove the spark plug wires.
  3. Remove the attaching bolts for the valve cover.
  4. Remove the valve cover from the cylinder head. If necessary, lightly tap the valve cover with a soft hammer to aid in removal. To install:
  5. Thoroughly clean the valve cover and cylinder head gasket mating surfaces.
  6. Install the valve cover on the cylinder head using a new gasket.
  7. Tighten the valve cover bolts to 14 ft. lbs. (20 Nm) in a crisscross pattern.
  8. Install the spark plug wires.
  9. Connect the negative battery cable.
  10. Start the engine and check for leaks. Fig. 1: Valve cover and gasket assembly 90953g12.gif
2.8L 6-Cylinder Engine
  1. Disconnect the negative battery cable.
  2. The following steps are necessary if your car has A/C and if you are removing the passenger side valve cover, if you do not need to remove the passenger side valve cover, skip them.
    1. Remove the A/C compressor belt and the compressor from the mounting bracket located on the passenger side of the engine. Do not remove the lines from the compressor.
    2. Place the compressor with the lines attached on the passenger side front shock tower and secure.
    3. Remove the compressor bracket.
  3. Remove the air cleaner-to-throttle body hose.
  4. Label and remove all necessary electrical and vacuum connections.
  5. Remove the attaching bolts for the valve cover(s).
  6. Remove the valve cover(s) from the cylinder head(s). If necessary, lightly tap the valve cover with a soft hammer to aid in removal. To install:
  7. Thoroughly clean the valve cover(s) and cylinder head gasket mating surfaces.
  8. Install the valve cover(s) on the cylinder head(s) using new gaskets.
  9. Tighten the valve cover bolts to 11 ft. lbs. (15 Nm) in a crisscross pattern.
  10. Install all necessary electrical and vacuum connections.
  11. Install the air cleaner assembly.
  12. Install the A/C bracket (if removed).
  13. Install the A/C compressor and belt (if removed).
  14. Connect the negative battery cable.
  15. Start the engine and check for leaks.
2.3L and 2.4L 5-Cylinder, and 2.9L 6-Cylinder Engines The 2.3L and 2.4L 5-cylinder, and 2.9L 6-cylinder engines have a two-piece cylinder head, the upper half and the lower half. The upper half is basically the same as a valve cover, except that it incorporates the bearing caps for the camshafts into the underside.
  1. Disconnect the negative battery cable.
  2. Remove the spark plug access cover.
  3. Label and remove the ignition coils and vent hoses or the distributor cap and wires if equipped.
  4. Check the cam alignment before removing the cylinder head.
  5. Remove the bolts attaching the upper cylinder head.
  6. Remove the upper cylinder head, lightly tap with a soft hammer if necessary. To install:
  7. Thoroughly clean the upper and lower cylinder head gasket mating surfaces.
  8. Apply liquid sealing compound to the upper cylinder head mating surface. WARNING
    Use a roller or your finger to spread sealant, do not use an excessive amount of sealant, or the oil passages could become clogged.
  9. Place the upper cylinder head onto the lower cylinder head.
  10. Check the cam alignment before tightening the cylinder head.
  11. Install Volvo tool number 5454 or equivalent to the upper cylinder head.
  12. Tighten the nut on the tools to seat the upper cylinder head.
  13. Tighten the upper cylinder head bolts, beginning from the center out to 13 ft. lbs. (17 Nm).
  14. Install the ignition coils and hoses or the distributor cap and wires.
  15. Install the spark plug access cover.
  16. Connect the negative battery cable.
  17. Start the vehicle and check for leaks. Fig. 2: Remove the clamp and detach the vent hose 90953p66.jpg
    Fig. 3: Remove the spark plug cover and the plug wires or ignition coils to access the retaining bolts 90953p80.jpg
    Fig. 4: Remove the retaining bolts 90953p72.jpg
    Fig. 5: A light tap with a soft-faced hammer is usually required to loosen the valve cover 90953p81.jpg
    Fig. 6: Carefully lift the upper cylinder head up and off the lower section. Note the integral camshaft bearing caps in the casting 90953p82.jpg
prev.gif next.gif

Jan 29, 2011 | 1999 Volvo S70

2 Answers

Firing order for 91 chevy s10 2.8


Here is the firing order diagram for that vehicle and engine.


e123f98.jpg

Jul 31, 2010 | 1991 Chevrolet S-10

2 Answers

On a 2003 chevy s10 4.3 v6 which side is the bank one 02 sensor on?


Drivers side = Bank One, Passenger side= Bank two.

Also sensor one is before catalic converter and sensor two is after catalic converter.

Dec 24, 2009 | 2003 Chevrolet S-10

1 Answer

Where is the transmission modulator located on the 1985 Chevy S10 Blazer 2.8


The modulater valve should be at the rear of the trans on passenger side, near the top and have a vacuum line going into it. Hope this helps.

Oct 03, 2009 | 1985 Chevrolet S-10 Blazer

1 Answer

How to remove heater core in 2002 chevy s10 pu. got dash out and lines off are there hidden screws?


There is a black covering on passenger side that should have four screws in it. You should find the heater core hidden inside the casing.

Mar 03, 2009 | 2002 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...