Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
looked it up online, looks like its in the underhood fuse box but couldn't get a good diagram that shows which relay number it is. the website i use is sort of dependent on the manufacturer, apparently acura did not feel like sharing that info. hope that helps
Posted on Jun 17, 2009
Engine Compartment fuse panel ( driver's side fender ) relay 301. Layout with numbers should be on the lid ( numbers only, not the functions ).
If you did not get an owners manual with your truck ( purchased used / lost ), you can download one from Ford in PDF format:
Makes it real quick to search for keywords.
Posted on Dec 08, 2009
Below are the proper steps to removing your vehicle's fuel tank..
Disconnect the negative battery cable.
Relieve the fuel pressure
Remove the rear seat cushion.
Remove the plastic grommet from the floor pan.
Detach the fuel pump electrical harness.
Disconnect the fuel lines from the fuel pump by compressing the tabs on both sides of each nylon push connect fitting and easing the fuel line off of the fuel pump.
Raise and safely support the vehicle securely on jackstands.
Remove the muffler mount.
Remove the heat shields.
Remove the fuel tank cover.
Remove the drain plug and drain the gasoline into a approved container.
Disconnect the fuel lines and remove the fuel filter and base.
Loosen the fuel tank filler pipe clamp at the fuel tank.
Support the fuel tank using a hydraulic jack and a block of wood or other suitable device.
Remove the two fuel tank support strap bolts and position the straps out of the way.
Partially lower the fuel tank to access the fuel tank filler pipe vent tube and disconnect the vent tube and filler pipe from the tank.
Disconnect the fuel vapor tube from the tank.
Lower the tank from the vehicle.
Installation is the reverse of the removal procedure.
Posted on Apr 23, 2010
Tips for a great answer:
Feb 20, 2014 | 1992 Acura Integra Hatchback
Jan 29, 2011 | Acura Vigor Cars & Trucks
Oct 01, 2010 | 1993 Acura Legend
Jun 15, 2010 | 1997 Acura RL
Jan 21, 2010 | 1998 Acura RL
Jul 05, 2009 | 1993 Acura Legend
Jun 17, 2009 | 1993 Acura Legend
132 people viewed this question
Usually answered in minutes!