Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Just had one of these with a maxima, the code is multiple random misfire, when a misfire occurs, to start is do the basics, replace the plugs, check fuel pressure, clean throttle body, and coolant is topped up. also I have seen if the O2 sensor is not working correctly is can cause a misfire, you will need a scan tool to look at what the O2 sensor is doing, o rby back probing the sensor (don't damage the O2 sensor wires). If it wires replace them as well, if it has coils they usually dont give that code if one fails, it will pinpoint that a certain coil if one fals.
Posted on Oct 02, 2009
The OBD-1 two digits trouble codes listed 'code-17' as:
This means that the fuel and ignition systems performance are in need of attention.
1.Distributor Cap: remove the 3-bolts holding the distriboutr to its body.
2. Inspect the distributor cap for cracks, and the roror-button is not worn or broken.
3. Inspect the distributor-cap terminals are not corroded or charred. Replace if charred. Clean them out if corroded.
4. Check the distributor-rotor for cracks or corrosion on its tip, and lesser spring tension.
Replace as necessary.
5. Reverse steps 1-4 to re-install distributor cap. Be sure to remove and replace the plug wires from the old distributor-cap to the new distributor-cap one-by-one. If not, the engine would not run.
1. Undo the top clips holding the fuel-filter hose, and undo the lower clips also.
2. Take out the fuel-filter from its mount.
3. Replace the fuel filter as necessary.(please not the way it was mounted) Reverse removal for installation.
Posted on Dec 11, 2009
Testimonial: "great help"
The transmission range sensor aka neutral safety switch is located underneath the air filter on top of the transaxle and very easy to access. Replace this part (around $50) and it will solve your problem.
What happens is this, when your tranny warms up, it disperses heat to the sensor switch and if its faulty or worn out, will send faulty relays to the transmissiom computer module (TCM) and makes the transmission shift irratically (OD to 3rd and back while driving at freeway speeds). You tranny is not overheating like most people believe, its the switch. Mechanics are telling alot of people that their tranny needs replaced. Watch Out For These People!! They only want your money!!
Posted on Feb 13, 2010
Tips for a great answer:
May 19, 2014 | 1993 Mazda 626
Apr 11, 2010 | 2000 Mazda 626
Jan 28, 2010 | 1999 Mazda 626
Sep 26, 2009 | 1995 Mazda 626
Nov 20, 2017 | Cars & Trucks
23 people viewed this question
Usually answered in minutes!