Question about 2007 Chevrolet Uplander LS Minivan

Open Question

Where is the transmission control module located in a 2006 Chevy uplander

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

keemo68
  • 1263 Answers

SOURCE: thermostat

the thermostat is located in the housing attached to the intake on the reare of the engine just follow the upper radiator hose to the housing. please rate this

Posted on Oct 01, 2008

  • 1167 Answers

SOURCE: Looking for location of ECM

Hope this helps

UPLANDER 06 Elec Cont Unit (ECU); (left front of engine compartment), 3.5L
.
moz-screenshot.jpghttp://cgi.ebay.com/ebaymotors/2006-Chevy-Uplander-Engine-Computer-PCM-ECM-12600928_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem320315289651QQitemZ320315289651QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Posted on Nov 13, 2008

jrw4u
  • 62 Answers

SOURCE: Transmission Control Module

Before condemning the transmission, I would check the shift cable for proper operation. Look at the side of the transmission where the shift cable attaches. Have someone shift the transmission from PARK to FIRST. The engine should not be running. If the operating lever on the transmission moves, then you probably do have an internal transmission problem. 78151957.gif
If the operating lever does not move, you have a broken shift cable or it has popped of it's attachments at the operating lever or gear shift handle.
78151960.gif
A bad Transmission Control Module (TCM) would not keep it from shifting. In the event of a bad TCM, the transmission would go into fail safe mode and you could continue driving the vehicle.

Posted on Apr 28, 2009

  • 32 Answers

SOURCE: replace taillight assembly on 2006 Uplander

open tailgate, remove 2 screws holding assembly in place. Pull tail lamp rearward to disengage 2 retainers on backside of assembly. Unplug connector. Replace assembly or bulbs now as desired

Posted on Mar 05, 2010

  • 36 Answers

SOURCE: looking for the location of

there is no external filter in the fuel line, filter is in the tank, doesn't need to be changed unless you have a pump failure

Posted on Nov 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the fuel filter on 2006 chevy uplander


No fuel filter in this vehicle. Fuel pump and strainer built into the fuel pump module.

Jun 27, 2017 | 2006 Chevrolet Uplander

1 Answer

I have a 2006 Chevy Uplander, 165,000 kms, started hesitating going from 1-2nd gear. On the highway, going 100 km/hr, would rev but not go faster. No Eng light. Only one TC light on. What's wrong?


run the fault codes
problem indicates a TCM problem or low transmission oil level.
as most chev transmissions are sealed with no dip stick, it may need a service by an accredited service shop or auto transmission specialist shop

Dec 24, 2016 | 2006 Chevrolet Uplander

1 Answer

Where is the transmission control module located on a 2007 chevy uplander located


It is in with the Engine control module. They are one in the same. Probably not the problem. When TCM's go out, they usually have no gear/movement, really hard shifts, or won't go to a higher gear. Check the fluid and or add a transmission additive. Additives work for a while.

Sep 07, 2014 | Chevrolet Cars & Trucks

1 Answer

My 2005 Chevy Uplander will only drive I reverse smoothly. It doesn't respond in drive or third gears. It revs but doesn't catch.


Some Chevrolet Uplanders have been failing prematurely. This premature transmission failure has been attributed to the control module, which fails, causing the transmission to overheat. The transmission fluid is running overheated if it gives off a burning smell, and if the fluid is extremely dark in color. This symptom is a sign that the transmission is beginning to fail. If the control module is the cause of this transmission failure and the transmission fluid is overheated, the control module needs to be replaced or reprogrammed. The dealership can make this repair.

Jan 05, 2013 | Cars & Trucks

1 Answer

Where is located the keyless module in Chevy Uplander 2006


Have you tired reprogramming the remotes top work the module first, that is what must be done before any parts are replaced, they do loose programming for no apparent reason at times. This can be causes by an electrical magnetic pulse of some sort.

Aug 17, 2012 | 2006 Chevrolet Uplander

1 Answer

My 2006 chevy uplander just died on the highway, not the battery , not out of gas. eventually restarted and died 3 more times. what could be causing this?


This engine is fully electronically controlled so the very first thing that must be done is to have a shop scan the systems control module for fault codes and then based on these codes perform diagnostics.

Jun 11, 2012 | 2006 Chevrolet Uplander

2 Answers

Have a 2006 chevy Uplander and check engine light comes on and off, also the ABS light comes on and off. hade both systems checked and everything checked out fine. also the auto start works sometimes and...


I have a 2006 chevy uplander that had an abs light coming on so i took it to my local GM dealer to have it diagnosed and they had told me that the hub and bearing assembly needed to be changed, so i changed it and the light still came on. Upon further investigation i came to discover that the abs wires were frayed in two locations and that the connecters were loose i tightened the connecters and replaced the wires and now my abs light does not come on. I also discovered that i did not need a new hub and bearing assembly after all.

Aug 14, 2011 | 2007 Chevrolet Uplander LS Minivan

1 Answer

The heater fan does not turn on in the front of my 2006 chevy uplander the fuses are all fine and can hear the resistance when i turn the control knob


COULD BE FAULTY BLOWER MOTOR RELAY.CHECK TO SEE IF BLOWER MOTOR GETTING POWER USING A TEST LIGHT.WHEN YOU TURN ON BLOWER SWITCH POWER SHOULD BE AT PURPLE WIRE.IF YES BLOWER MOTOR FAULTY.IF NO YOU HAVE FAULTY HVAC CONTROL MODULE OR BLOWER MOTOR CONTROL SWITCH.

Jan 09, 2011 | 2007 Chevrolet Uplander LS Minivan

1 Answer

Looking for location of ECM


Hope this helps

UPLANDER 06 Elec Cont Unit (ECU); (left front of engine compartment), 3.5L
.
moz-screenshot.jpghttp://cgi.ebay.com/ebaymotors/2006-Chevy-Uplander-Engine-Computer-PCM-ECM-12600928_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem320315289651QQitemZ320315289651QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Nov 13, 2008 | 2007 Chevrolet Uplander LS Minivan

Not finding what you are looking for?
2007 Chevrolet Uplander LS Minivan Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...